HPG62: BIOS Uptate
Hello
I should update the BIOS of my notebook (F.06, 24/04/2010) and I see there are three new available versions:
F.35 Rev-A;
-F.48, and
-F.08 Rev a.
Can I download all of them? If not, why?
Thanks in advance.
Enrico
Hallo
Here you go
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55430.exe
It's the newest one.
Tags: Notebooks
Similar Questions
-
I forgot my bios password for my HPG62-339WM
I forgot my bios password for my HPG62-339WM
Hello
Try to enter: 78165135
Kind regards
DP - K
-
ACER ASPIRE 471 - E1: UPDATE THE BIOS CRASH
HELLO, I NEED HELP ON THIS.
I WAS updating THE BIOS ACER ASPIRE E1 - 471 VERSION 2.11 to 2.18 BUT GOT IN FAILURE, WITHOUT NORMAL MORE to IGNITE.
WHEN UPDATING THE FILE ORIGINAL WITH THE HELP OF THE ACER SUPPORT WEB SITE, RESTART THE LAPTOP TO WINDOWS POWER ON A BACK PAGE AND DISPLAY IT ON THE SCREEN...
UPTATING:
TRUE BIOS VERSION: ZQS 2.11
NEW VERSION OF BIOS: ZQS 2.18
PROGRESS...: 0% AND SCOPE WITH A 100% SUCCESS
AFTER THIS, THE LAPTOP REBOOT AGAIN AND POWER BLUE LED LIGHTS UP BUT NO SCREEN...
AT THE START OF THE LAPTOP, HARD DRIVE MAKING NOISE OF POWER ON AND.
NO SCREEN, THE COMPUTER PHONE IS FREEZE.
ON THE BACK THE INFORMATION OF THIS LAPTOP, THE BOOK SAYS:
Aspire E1-471-6683
MODEL NO.: ZQT
.....
SNIDS: 31300078979
So Original BIOS was ZQS but the model said ZQT?
I have not found a repair for this model, so cannot move too much by myself.
I found some instructions on the use of USB with the FCN + ESC + Power Buttom combo...
The use of files with. FD extension inside the USB key.
I tried 1 for the test and the thing happens as users said.
Power Led flashes, USB Stick will blink for a few seconds, and then restart laptop.
BUT STILL FREZZY.
I think I use the wrog. FD file.
ACER support website has none. This model in the FD file (or any other type of file, hit. EXE, a)
You can with ACER Support me?
Thanks, it is a client of the portable computer of mine, I'm kind of scared at the moment.
OK, thanks for the reply.
I got the sollution and will share with you now.
[edited to conform to the guidelines]
YOU WILL NEED TO FORMAT A USB STICK WITH FAT (16) PARTITION STYLE.
-------
NOW, THE SECRET OF. FD FILE
YOU MUST PUT IN THE USB THIS FILE WITH THE EXTENSION. FD, BUT THE ACER DOWNLOAD SITE IS ENOUGH. EXE TO THE INSTALLATION, SO YOU GO ON ANOTHER COMPUTER (INCOMPATIBLE WITH ASPIRE E1 VERSION) AND RUN THE FILE...
YOU RECEIVE AN ERROR MESSAGE, BUT NOT CLICK NOW ON ANY BUTTON.
NOW, OPEN WINDOWS EXPLORER AND GO TO C:\USERS\(USER ACCOUNT)\AppData\Local\temp\7zS4F0C.tmp
INSIDE THIS FOLDER, YOU CAN GET THE ST. FD FILE (PERHAPS ZQS.) FD)
THAT COPY ON USB KEY AND CLOSE THE ERROR MESSAGE. (FOLDER WILL DISAPEAR AFTER THAT)
WITH THE FILE INSIDE OF THE SECONDARY KEY, FOLLOW THE MANUAL INSTRUCTIONS.
BASICALLY:
Steps for the USB storage device BIOS recovery
To create a crisis USB key, perform the following steps:
1. format the USB storage drive using the Quick Format option.
2. save the ROM file (filename: ZQS.fd) in the root directory of the USB storage device. Make sure that there are no other file BIOS stored in the same directory.
3. plug the USB storage on USB device.
4. press thebutton, then connect power cable.
5. the power button flashes once.
6. press the Power button to start the CRISIS of the system mode.
7. when the CRISIS is over, the system auto restarts with a possible BIOS.AFTER THAT
8. update the latest BIOS version for this machine of normal BIOS flashing process.
YOU MAY HAVE ANOTHER PROBLEM LIKE ME, AFTER RECOVERING FROM CRISIS, BIOS NOW SEE THE ANY HARD DISK, SO YOU MUST UPDATE THE BIOS AGAIN WITH THE HELP OF ANOTHER TOOL LIKE HIRENSBOOT HELP FIXITURE MINI_XP.
BUT IT IS ANOTHER CONVERSATION.
THANKS FELLOWS.
-
Dear Sir.
I use hpg62 for two years. A week ago one of my usp woking port not so I did factory reset it using recovery discs. And its good. Since two days my worst even getting PC freeze even after 5 minutes. And I did the following steps as your recommended earlier for other positions. and I have not any advice PL errors solve me this problem.
Judgment of the laptop. Tap away at f10 you start Notepad to open the menu of the bios. Under Advanced Options or diagnosis tab, you will find the possibility to run tests on the hard drive and memory. Post back with the details of any error message.
If the criteria above, try the following.
In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator". In at the prompt, type the following command and press ENTER.
sfc/scannow (Note that there is a space between sfc and /)
Let the entire process, then the output type and press ENTER.
Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties. Click the Tools tab and then click on the button "check the drive for errors. In the next window make sure that both boxes are checked, then click Start. Part of this process will require a reboot to check the disk.
Kind regards
DP - K
Thank you
The only thing I can think is that your battery is bad. Try to remove the battery and run with only the power adapter is connected.
-
How to enter the bios to the macbook pro
Hello
How enter the macbook (Command + Option + O + F) bios does not work in my MacBook Pro (13-inch, mid 2009).
Macs with Intel processors as you do not have a bios (firmware 0pen), it uses EFI (Extensible Firmware Interface).
What you trying to accomplish?
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
-
Hello
can someone tell me the Bios updates for my machine?
I need one that is more aggressive on material resources. The appropriate drivers for the GPU would be nice as well. Reading from data bases of Geekbench, this machine is never more than a pretty paperweight to research.
Thanks for reading
Details in the following way:
Motherboard: Apple Inc. Mac-B809C3757DA9BB8D iMac17, 1
BIOS: Apple Inc. IM171.88Z.0105.B08.1604111319
Memory: 32768 Mo 1867 MHz DDR3
Processor: Intel Core i7 - 6700K @ 4.00 GHz
GPU: AMD Radeon R9 M395X 4096 MB
macpraxis,
You confuse a Mac to a Windows window. Mac do not have a bios but they have firmware, if there is any necessary updates to your machine, they are available in the software updates which is located in the Mac App Store. If nothing comes, while your system is up to date and should be left alone.
If you encounter any problem, perhaps to let us know what it is would open the way for getting help.
-
Pavilion dv7 6163 cl: unlock (reset) password on BIOS/CMOS for HP DV7 - 6163cl
The bios of my notebook (Pavilion dv7 6163 cl) blocked by password, and I never put a password. Could you help me solve?
Enter the wrong password 3 times or simply leave them blank and press success enter 3 times. You should get a stop code. This zip code here.
-
Pavilion 15: Bios password
I have a Pavilion 15-e022sa which I just can't get into the bios as it says I need a password that I never put someone could please help
Hello
Enter 60081217
Kind regards
DP - K
-
8570p: 8570 bios password
We have our password bios laptop company typed wrong and how stop us this case? Access the bios has it boot in network again.
Dear customer,
Welcome to the Support Forum HP and we are happy to help you.
This is to inform you that all professional laptops HP Probooks as EliteBook have tighter security than the consumer models infact they do not produce ' stop codes ', the password cannot be derived from the serial number and the
code is stored in a memory not volatile to remove the cell RTC does not reset the password in this case.
- Please take a look at this link.
http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility
- Replace the BIOS chip
- Please Contact HP Business Notebook of support they should be able to send a SMC.bin custom file that you can use to reset the password at startup.
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the button white Thumbs Up on the right of say thank you*.
Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.
Thank you
GBL84
I'm not an employee of HP
https://DL.dropboxusercontent.com/u/26983620/Java_Bios/biosunlock.html
-
Clocked at 20 degrees warmer since putting on 3.87 Rev A Bios Update on Z420 Workstation
I have a question:
Not too long ago I put the Bios Update on A Rev 3.87 was considered to be as critical an update on my workstation Z420 (running Windows 7 Pro 64-bit), and lately I've found that the CPU idling at about 20 degrees more hot than before. I used to hear creaking noises coming from the computer I learned normally come circuits on the motherboard power delivery, but as long as I heard those CPU would be on average around 50 degrees C at idle. I hear these noises and now the CPU is on average around 70-75 degrees C at idle. Not sure what the connection is. HP performance Advisor tells me I'm in the normal range, but I want to just make sure that with programs like Autodesk Maya there, she become too hot and stop the machine. I don't know what the temp high-end is considered maximum security. This change could have due to the update of the Bios?
Thank you for your response and suggestions. I check in my BIOS power management settings has been developed the extended mode, but the temperature has always hovered around 70-78 degrees at idle. I checked Intel spec for this (E5 - 1650 6-core xeon) processor, clocked at 3.2 Ghz by heart, and although he said nothing on the TMax, he mentioned that the TCase (which he defined as the maximum temperature allowed integrated processor heat sink (IHS)) was 64 degrees Celsius. Now my temperature of the case, according to my HP Performance Advisor version 1.7.7517.0 is only about 24 degrees C, but I put my fan a little higher CPU, about 2009 rpm speed. This makes a little more noise, but my CPU temp has dropped to about 49 °. "" Before the change of the fan speed has been slightly more than 1300 RPM while the Advisor I have always said that it is in the range "normal". Is it good to get the speed of the CPU fan like that or do I have to go a little lower?
James Holman
-
All BIOS options are disabled / grayed out
I have 8770w with HP ProtectTools active EliteBook and just to have on the security of the TPM secure. I rebooted and tried to access the BIOS, my password is accepted, but virtually all of the options are disabled. Any idea what's going on here?
Is it the TPM chip?In fact, the solution was to open a session in the BIOS as a guest and then configure a BIOS Admin password. Thank you post that.
It is odd that the default user does not receive the Admin of the BIOS rights.
-
Hello everyone,
I had real trouble moving my Touchsmart 600 - 1030fr to Windows 8. Due to incompatibility of graphics driver, I see nothing on my computer after the startup screen (the one with the blue window).
I discovered that a change in the BIOS can solve this problem, but my BIOS asks me a password. I tried to reset this password in removal and replacement of the battery from the motherboard. Although he told me that the BIOS has been reversed to the factory settings, the password is always there.
Is anyone of you know what is the password to the factory settings?
Also, I read on the forum but
- The password 12345 found heredoes not work
- the text which States
"NOTE: If a new non - HP BIOS is installed, and turn on a password is used, and you don't remember the password to start the computer, see the support document of specification motherboard for your computer model to find the password reset instructions to clear BIOS passwords."
not help me in my documentation of the computer do me not any suspicion on the specification of the motherboard and it is a real BIOS HP.Thanks for your help.
Here are the specifications of your desktop HP TouchSmart 600-1030fr and it's card mother Pegatron IPP7A-M5 (E60). Please follow these instructions;
The BIOS password is used to protect the settings of the BIOS against unwanted changes. If you have forgotten your password, you can use this jumper to reset password settings.
To clear the password BIOS follow these steps:
1 turn off the POWER the computer and unplug the power cord.2. Locate the jumper marked CLEARLY P.W.
3. move the jumper on the PSWD jumper on pins 3-1.
4 wait about 10 seconds, and then return the jumper to pins 5-3.
5. connect the power cord and turn on the computer.
6 hold down the F10 key during the boot process to enter the BIOS setup. You will not be asked a password.
Diagrams are on the page "card motherboard" for your computer.
-
How Flash the BIOS if you cannot start Windows
Hello
I have a BIOS virus which prevents ANY version of any operating system Windows to boot at all.
(Linux will start and run fine)
So, to solve this problem, I need re-flashing the BIOS.
Problem is... HP offers only the BIOS as an executable Windows utility.
Can someone help me figure out a way to Flash the BIOS WITHOUT Windows?
THX
Now, in response to this topic, I discovered a solution...
HPBIOSFILE.exe - writeromfile /-writehexfile /-writehdrfile
I hope this helps some of you.
To use this...
(1) download the executable file (.exe) for BIOS update for your motherboard
(2) a copy of the program flashing of Award Bios BACK (Google it, easy to find)
(3) obtain a downloadable copy of the BACK 6.22 (of Microsoft) and create files to start this one. (possibly another computer to do this).
(4) start your computer affected in BACK 6.22
(a) copy the files in a directory
"(b) using the bold line above... type the name of your BIOS instead of the HPBIOSFILE.exe file ' and run the command.
You will find yourself with a ROM file, a BIN file and a header file.
You can now re-Flash your BIOS on your HP computer outside of a Windows environment.
ENJOY!
-
I disabled the admin by compensation password in the bios, set up after installation 8.1.my windows on password power has not allowed, but now I can not connect BIOS, even if I still remember the power on password. Thank you for your help thank you
Hello
Enter 67578297
Kind regards
DP - K
-
TouchSmart HP ENVY 15-j104ea N: BIOS Corruption and Windows Logo + B is DOES not
Hi guys,.
I recently got a BIOS corruption this morning based on the indications of 2 key CAPS LOCK flashes. This happened after an accident caused by an UPDATE and a QR code on the page.
I tried to use the resolution by pressing the logo WINDOWS + B, but it does not work. Is it because of Windows 10 or?
Kindly help me with this problem. Bravo guys.
Bloody solved the problem. Kudos to this video. https://www.YouTube.com/watch?v=_aYhDdhcpcA
Maybe you are looking for
-
HP Pavilion 500-129ea remove Windows8 and install Windows7
Dear HP support, I changed the BIOS to boot from the CD drive by changing LEGACY support to ACTIVATE and changing SECURE BOOT to DISABLE Big step forward... BUT while the PC will now boot from the CD drive and start installing Windows 7 (harrah) keyb
-
Windows Update, error! Impossible to update. Code Code 8007045 D 80071 has 91
Original title: Windows Update, error! Impossible to update. I have try the update to have a better PC but it won't allow me because of an error. There are 2 errors in fact, which are Code Code 8007045 D 80071 has 91 All 23 updates have an error whic
-
Dell Dock exe "application not found" error after cleaning malware virus and fix registry problems
Hey guys!, I had a problem with malware. (In particular this Vista Internet Security * who seems to knock everyone). I fixed this problem as well as the issue with the thing of my Microsoft Security (which sets the windows Defender) and then I went t
-
How to check ink levels, clean the print heads in Windows 7
We have a range of printers hp psc 1210 xi & win 7 32-bit. How can we check the ink level, clean the print heads, etc. ? I tried to print a test page, but there was no information about it on the ink levels.
-
17:49:26 **** Incremental Build of configuration Simulator-Debug for project RequestBuilderDemo **** make -j4 Simulator-Debug make -C .//translations -f Makefile update make[1]: Entering directory `/home/nitish/Development/RequestBuilderDemo/translat