HPMSN145. DLL does not. (WIN-7)

Similar Questions

• "winhttp.dll" does not work how can I download it? It prevents me from using adobe or yahoo.

  Original title: winhttp.dll does not work how can I down load it

  I have win xp winhttp dll I can't use adobe or yahoo.

  Once more, the response from the Support Engineer with a link to an article that does not help is marked as 'response' by a moderator of the Forum after 6 days of inactivity when it isn't the answer to everything.

  It's a real shame the way things work around here.  If I were Microsoft and "indulged" these technical support engineers who regularly publish responses that are unnecessary and they are marked as 'response', I think that I would call off the coast of the commitment. "

  Usually, it's just not worth reading these Support Engineer 'Answers' as they are not even close.  They are usually just wild goose hunting.

  WinHTTP.dll if missing some things just will not start:

  BITS service (Background Intelligent Transfer Service)
  Automatic update service

  In the Event Viewer system log, you will see tings like this:

  Service
  Cannot start Service on Local computer Background Intelligent Transfer.
  Error: 126: the specified module could not be found
  Event type: error
  Event source: Service Control Manager
  Event category: no
  Event ID: 7023
  Description:
  The Background Intelligent Transfer Service is completed with the following error:
  The specified module could not be found.

  The automatic updates Service hang and displays "Start" in the Services applet:

  Event type: error
  Event source: Service Control Manager
  Event category: no
  Description:
  Automatic Updates service hung on starting.

  CS5ServiceManager Adobe Dreamweaver Service Manager (and perhaps other Adobe startup items) not start and displays error message like this:

  CS5.5ServiceManager.exe - Unable to locate component
  This application has failed to start because WINHTTP.dll was not found.  Reinstalling the application may fix this problem.

  Running sfc/scannow will not replace the winhttp.dll file missing.  I know because I tried.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called winhttp when the name of the file should really be called winhttp.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

• He continues to tell me bho.dll does not work how to fix this

  my computer is slow real work and continues to tell me BHO.dll does not work and restore it.  I don't know how he also said IE3. SH.exe is not working?

  Hello

  ·         There the latest changes on the computer before the show?

  Error starting IE3SH and BHO.dll can occur due to problems in the installation of some programs on the computer. Follow these methods and check if that helps.

  Method 1:

  Follow these steps and check if that helps.

  Step 1:

  I suggest to start the computer in Safe Mode with network and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Step 2:

  You may also start your machine in a clean boot State to rule out the involvement of a third party software conflict.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start your machine in normal mode by following step 7 of the link.

  Method 2:

   

  I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

• To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  To send messages through the network (LAN, netsend and msg.exe) does not win 7... can u tell me the cmd

  If any document available please send my email id

  Thank you & best regards

  Martine

  Hello

  Thanks for posting your query to the Microsoft forum.

  Please see the suggestions in the following threads:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/msgexe-netsend-anything-availible-on-Windows-7/e9743edc-AFA9-4942-b1c7-66baf443067b

  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/net-send-in-command-prompt-does-not-work/00ce5137-dff7-49e5-8511-943e55b83bd7

  Let us know if you need more assistance. We will be happy to help you.

  ___________________

  Thank you best regards &,.

  Isha Soni

• After that the phone automatically restarts, the following message appeared applicationdata\pokki\engine\launcher.dll does not exist

  Original title: applicationdata\pokki\engine\launcher.dll

  While using my laptop that it automatically restarted, lenovo, windows 8, n, now it says applicationdata\pokki\engine\launcher.dll does not exist, and many other software also do not work properly, I a key system, rescue , but unable to use it, please suggest

  Hi Manunazareth,

  I'm sorry to know that the steps of troubleshooting provided in my previous post didn't help in the issue of fixing.

  To start the computer in safe mode, you can consult the following link:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

  You can check the safe mode issue, if the problem does not persist in safe mode, you can perform the clean boot and check. A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please see: how to reset the computer to start as usual after troubleshooting by clean boot of the KB article to start the computer in normal startup after having solved the problem.

  Please answer us on the State of the question to help you further.

• When I get a message on my computer it come say arccon.dll does not work how do I fix this proplem.thanks.

  www.arcCon.dll. He says it does not work.

  http://pcsupport.about.com/od/findbyerrormessage/a/arccon-DLL-not-found-missing-error.htm

  Arccon.dll not found error resolution

  Read the above.

  See you soon.

  Mick Murphy - Microsoft partner

• WinHTTP.dll does not work with TLS 1.1 and TLS 1.2

  We cannot send https requests to our payment processors using windows 7 with winhttp.dll or msxml6.dll because it is not support TLS 1.1 and TLS 1.2

  on Windows 7 and windows 2008 R2 server I have the same version of winHTTP.dll 6.1.7601.17514;

  winHTTP.dll version 6.1.7601.17514 does not work with TLS1.1 and TLS 1.2

  WindowsServer 8.1 and windows 2012 I have winHTTP.dll version 6.2.9200.16451
  winHTTP.dll version 6.2.9200.16451 works well

  Here is a sample of my test code:
  Set obj = CreateObject ("WinHttp.WinHttpRequest.5.1")
  obj. Open "COMPUTER", "https://www.paymnt.com/".
  obj. SetTimeouts 30000, 60000, 60000, 60000
  obj. SetRequestHeader 'Content-Type', ' application/x-www-formulaires-urlencoded.
  obj. Option (6) = false ' disable redirects
  obj. Option (9) = 512' force TLS 1.1 - error
  "obj. Option (9) = 2048' force TLS 1.2 - error

  How can we improve the winhttp.dll version or msxml6.dll in windows 7 to work with TLS 1.1 and TLS 1.2?

  This is the e eprint screen with winHTTP.dll version 6.1.7601.17514

  

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Whenever I have connect my system, the error message 'C:\Users\Dell\AppData\Roaming\mapnc.dll' does not exist.

  Whenever I have connect my system, the error message appears which displays

  "There was a problem starting, the specified module could not be found."

  and sometimes,.

  "C:\Users\Dell\AppData\Roaming\mapnc.dll" is not exist.

  How can I solve this problem? Please help me. The information system is given below,

  Name of the operating system Microsoft Windows 7 Ultimate
  Version 6.1.7601 Service Pack 1 Build 7601
  Manufacturer of operating system Microsoft Corporation
  System model Inspiron N5010
  System Type X 86-based PC
  Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz, 2528 Mhz, 2 Lossnay, 4 logical processors
  A09 BIOS Version/Date Dell Inc., 19/10/2010
  SMBIOS Version 2.6
  Physical memory (RAM) installed 4.00 GB
  1.86 GB available physical memory
  5.85 GB total virtual memory
  4.47 GB available virtual memory
  2.93 GB page file space
  Paging file C:\pagefile.sys

  Avira Antivirus Premium is also installed on the system. The error message from the last weak. However, the system had no no ill effect after that.

  Hello

  Thank you for writing to Microsoft Communities.

  1. have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.

  Method 1: Try to start the system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  Please follow these recommended steps and post if you still experience the problem.

• What to do if netapi32.dll does not work...

  Recovery and other options may not work... ' error 'Install NETAPI32. DLL is read on the screen.

  Hello

  1. when exactly you get the error message?

  2. you have any security program installed on the computer?

  3. are you able to boot to the desktop?

  If you are able to boot to the desktop, I suggest you to follow the steps and check if it helps.

  Method 1:

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Note: You may be prompted to insert the Windows 7 installation DVD, if any files are missing or damaged.

  If the not resolved then you can also try the system restore to the date when the computer was working fine.

  Method 2:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  Hope this helps and keep us posted.

• PRE 9 - Preview not playing does not Win 7 64 bit

  Are there conflicts known with pre 9 and Windows 7 64-bit? I have a .mpg made with pre 9 when it was installed on Vista 32 bit. Now I have this imported file 9 pre installed on Win 7 64 bit and the movie does not play in preview/edit window. It is just statically.

  I checked online and downloaded all the recent updates, don't know what else to do at this point. Thank you if you have any info on it.

  I am pleased that the updated video driver fixed things for you. It's amazing to see how the update to the correct video driver can solve so much. Pre, unlike most other programs, really closely interfaces with both video and audio drivers. On the only other programs who are extreme games, heavy 3D and CAD applications.

  In addition, if a machine is used for two extreme games and video editing, sometimes an application settings, perhaps not the correct one for another.

  Please report to us your success,

  Hunt

• I get an error saying: "WSOCK32.dll does not work properly" after playing a game on a web site.

  Hey, I'm using windows XP on my IBM thinkpad T40.

  I noticed after playing a game website (don't remember the URL) that my WSOCK32.dll did not work properly.
  It is sending a bunch of errors at startup and saying things are corrupt.
  I think it's a virus, but my scanner come clean. worse yet, I can't play minecraft!
  Please help me...
  original title: WSOCK32.dll errors

  Hello

  -What happens when you try to play Minecraft in the computer now? Do you get any error messages or codes? If Yes, what is the error message or code?
  -What are the exact error messages / complete that appears at startup?
   
  Follow the steps mentioned below and check if the problem persists.
   
  Step 1: I suggest you perform the steps from the link below and check if it helps.
  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP, and in Windows Vista?
  http://support.Microsoft.com/kb/811259
   
  Step 2: To be sure that there is no infection in the computer, you can try running the Microsoft Safety Scanner in it. The following link will help you get:
  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
  Hope this information helps.

• AdvrCntr6.dll does not appear in my computer

  I have a LG home Media Center and elected to download Nero Media software .after that I started to install the program nero, I got a message saying that the file AdvrCntr6.dll is not found on my computer.the installed a degree program and stopped the installation process. Please help me learn what is happening and what made this file. It is a Microsoft file and I can install it without problem so that this Nero program works correctly. Thanks for any help.

  Harold Green

  Hello

  The AdvrCntr6.dll is not a microsoft file, but it is installed with nero. It should be located in the following directory: C:\Program Files\Common Files\Nero\AdvrCntr6
  If this file is there, and you still get this error, then it might be a compatibility problem with other programs. For example, it has been reported that the airfoil for Windows could be the culprit:
  http://Forum.my.Nero.com/index.php?showtopic=14822
  You can find instructions there how to solve this problem.

  If you do not have Airfoil for Windows (so it will not be the culprit) - I suggest you uninstall Nero once again, restart, and then run the utility of general Nero CleanTool: http://www.nero.com/eng/support/service/nero-clean-tool.php
  And then reinstall the latest version of Nero Media software on the site of the factory instead:
  http://www.Nero.com/eng/downloads/

  I hope this helps.

• HP laserjet 3390 does not Win 8-sided print

  I want to install a new computer HP Envy Phoenix 800 with Windows 8.  I am trying to install a printer HP 3990.  I can get it to print single sided, but it won't allow properties to select double print side and the scanner does not work.  Other features of properties are not available.  I downloaded new drivers from Microsoft, but the printer will not work correctly when it is connected via a USB port.

  Thank you.

  Ken

  Hi Kenneth,

  You can try to uninstall completely to reinstall the drivers for the HP LaserJet 3390 model from this link and check if it helps:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=1140788&TaskID=135&prodTypeId=18972&prodSeriesId=1140785&lang=en&cc=us

  See the exact steps in this link and check if that helps:

  HP LaserJet printers, multifunction and all-one - install the driver included in Windows 8 or Windows Update

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c03470332

  Also, follow the steps in this Microsoft article troubleshooting and check if that helps:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope this helps, if you need help on Windows let us know we will be happy to help you.

• UpdaterInventory.dll does not exist

  When you try to install CS5 I get the error to the that setup initialization failed.  Audit of the newspaper I find updaterInventory.dll is not present at the location, how to solve this?

  you have corrupted Installer.

  Follow all 7 steps and dl the trial: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  Use your serial number to activate.

• DLL does not not on the deployed computers

  Greetings;

  I'm working on a VI to run a night vision camera.

  My PC is win 7 and I'm under LabVIEW 2014.

  My machine deployment is a tablet of Microsoft Surface on 10 to win.

  The camera driver software is Pleora 4.0.3.3049, I'm also using some functions IMAQ.

  The VI and the exe file I built work fine on the development Machine, the display is working and running between 30 and 60 frames per second at 1280 x 1024 color.  (many PC resources)

  I have a command of consloe window that also works on the development of PC.

  It is not run on the deployment device, (tablet of Microsoft Surface on 10 to win).

  My first numbers have been associated with the location of 3 .dll files.

  they are:

  NIVison.dll

  NIVisSvc.dll

  eBUS_C_SDK.dll - (this is the one of Pleora)

  The exe would question me for the location.  I solved this by adding them to the folder where the exe file was stored.  A temporary workaround solution.

  When the lance of the exe, I get a message of "Lack of external function" with the sub induvidual VI which calls a specific dll.  15 in all.

  The façade is as I expect, but I get the message above this one.

  I installed and re installed the drivers for the cam on the surface.

  I checked that the surface has the full version of RTÉ.

  Thanks in advance;

  Mike

  Thank you to:

  Paul and Ren of the service request line the problem is identified and corrected.

  Thank you both for your help today!

  I just had a major breakthrough, looking at the forum thread that Paul has pointed out to me I went to each call node function Lib changed to specify the path on the block diagram and added a constant application directory to each