HPPhoenixctrl: WANT to series PHOENIX - LED lighting control Solution

I'm new to the forum and just got my new PHOENIX envy 860 - 180st, personalized with the following text:

Windows Pro 64-bit 10

Intel core i7-6700 4.0 GHz

16 GB OF RAM

512 GB SSD

GeForce GTX 960 2GB

No secondary drive (I store all the data on a NAS)

Several Web pages featuring LED façade lighting, I understood that the 860 series provided a method to customize these lights.  I also believe I read that the 850 series could only turn.  However, I can not locate ANY documentation regarding the LED lights.  After hours of searching online, I only now have an interest to stop and reduce my electricity bill.  HP not me was not impressed by this "feature" negotiable.

There is an application called HP Phoenix lighting (or LED) control which is used to control the LEDS.

I found it in an old net while browsing through the subject.

http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/missing-software-HP-envy-Phoenix-850se/m-p/5146673/highlight/true#M111153

Check in the Control Panel, or type it in the search box on the systray next to the symbol for Windows. There could even be an icon that represents the control of lighting in the systray. My last HP 15 Omen product loan had an app called HP Omen Control, which allowed for control of groups of the backlight on the keyboard. She allowed the owner to make changes to custom groups of key color.

If she needs relocation, then it must be done in the HP Recovery Manager. See reinstalling software and applications to the HP Recovery Manager.

@NewEnvyOwner

Try the following softpaq. It's called the HP utility control of Phoenix.

http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71672.exe

BTW, the HP representative, that you talked to was wrong. The softpaq were found in the download of the 850 self-service portal want to Phoenix by HP Expert @Dragon-fur.

Tags: HP Desktops

Similar Questions

  • Open DMX to control the RGB LED lights

    For a demonstration, I would like to order by DMX RGB LED lights.

    I have a compatible open USB2DMX cable DMX (made by JMS but similar to ENTTEC) based on FTDI interface.

    All the necessary drivers are available and everything works with for example the Freestyler.

    LabVIEW can communicate with FTDI interface using the provided by FTDI Labview examples, but the DMX control does not work.

    Someone at - it experience with Open DMX and USB2DMX communication in Labview?

    Best,

    Rudolf Sprik

    Dear Stephen,

    I thank very you much for your message on our forum. You have configured the device to the MAX? Please see the following KB on this topic. I have no experience with this material, but if you post the driver as well as an example, I can take a look. Ultimately, it is an equipment series problems. It's a little more complicated, I don't have such a device, but I hope that I can give you valuable tips.

    Best regards

  • Loading stops at 97% battery NB500-108, led light never turns green

    I have a mini laptop, NB500-108, running Windows 7, and he never had a battery up to present problems.
    For some reason, battery stopped at 99%, 98% and now to 97% of the load.
    Tray icon says "plugged in, load" but it never reached 100%.

    In addition, the led light never changes from orange to green, as he used to do before.
    It's annoying because I don't see if battery is fully charged when the machine is off.

    I have already tried many suggestions to recalibrate the battery:
    1 flashing BIOS;
    2. compatible control ACPI method to uninstall or disable Microsoft in Device Manager;
    3. full release / full load;
    4 discharge half / full load;
    5 removed the battery and the power button down for 10, 20 or 30 seconds...;
    6. system restore;
    7. same beahaviour with a live Linux pen.

    None of this has worked. Any comment on this, Toshiba Support?
    Thank you in advance.

    > None of this worked. Any comment on this, Toshiba Support?
    Toshiba support? He is a man of user forum, you will get some comments from members of the community ;)

    I think it could be a faulty battery since the lithium batteries would begin to lose own performance after his indictment for 400 - 500 times, I suppose that your battery is affected it s just a theory, but I think it is to test a new game

  • Satellite A300-1NO - webcam does not work, but the LED lights

    Hello!

    I have a laptop Satellite A300-1NO, with Win 7 installed. My problem is that my webcam does not work always, when I want to use it. Sometimes, it works perfectly in Skype, WLM etc... but sometimes I see a white or a black screen with a 'loading circle' in there. Blue is the LED light, I can see it in Device Manager too, but there is no picture, just 'loading '. I tried to uninstall the driver and then reinstall it, I installed the new "camera Assistant for Toshiba", without success.

    Is there any solution for this?

    > Is there any solution for this?
    I put t think there is solution for this. If I understand you right there is a problem with software pre-installed. It is not easy to say why this is happening.

    I have Satellite A300 too and use it with Win7 32 bit. Webcam works fine all the time.

    One more thing: have you noticed this problem in the first moments after installing Win7 or later?
    Have you installed something that may be the reason for this?

  • Portege M800: How to turn off the LED light of the multimedia and the touchpad?

    Hello

    I have Toshiba Portege M800.
    I want to know, how can I turn off the light of multimedia and the touchpad
    Thanks in advance

    Hello

    I m not M800 owner but I ve got an another Toshiba laptop and these LED lights I can turn market in the BIOS and in Toshiba HWSetup.
    The HWSetup is placed in Toshiba help optimize them and the settings are in the tab 'enlightenment '.

    See you soon

  • Satellite P300 - 148 Vista Ulimate - LED light button does not work

    My laptop model is Satellite P300-148.
    I reinstall system-vista Ultimate.

    However, after installation, my * mute button or LED light button * cannot be controlled by press mute.

    It's like, normally, when you press the mute, the light will be switched on or off.
    However, this is no answers when I press on it.

    I can only turn lighting on or off using Toshiba help.

    Also when I press the "play" button, the windows media player has no more answers.

    So is it a solution? Or drivers?
    Thanks for the reply.

    Hello

    I think that these buttons don t work properly due to the Vista Ultimate.
    I checked some threads here and it seems that the PPV that controls this Toshiba buttons don t support the ultimate or the ultimate doesn't fully support the VAP.

    But just a question;
    Did you check the Toshiba Assist-> Optimize-> Toshiba button Support?
    This tool allows you to configure the buttons. Maybe you should check this.

  • LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

    Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

    What do you think average is by any fix for the WLan light

    Are sure you that you have enabled the WLan switch on the side of the laptop?
    Only this switch controls the WLan light!

    If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

    then if there is something wrong with the hardware of notebooks is needed the help of ASP.

  • HP ENVY i7 Desktop 700-311: is the 23-inch monitor screen IPS LED - lighting compatible with HP ENVY Desktop 700-311 HP Pavilion?

    I recently bought the hp with i7 proceessor envy and I want to know if the 23 inch screen IPS LED - lighting HP Pavilion monitor will be compatible with i7 ENVY 700-311 HP Desktop processor?

    Until the entry of the screen is the viudeo output which is available on the desktop PC, it will be compatible. The dekstop PC has VGA and DVI outputs. Just use a cable that allows you to connect both devices and you'll get the video.

    I see that the screen has both. I highly recommend the digital video input instead of the VGA NICU.

    You will need a DVI cable.

  • How can I manipulate a 2D led array so that the LEDs light up in different ways?

    Hello everyone. I hope someone can help me.

    I have an array of leds of dimension 2d 4 x 4. I want that the leds light up in two different ways.

    One, I want the leds light upward from left to right. In the following order:

    0.0 0.1 0.2 0.3

    1.3-2.3 3.3

    3.2 3.1 3.0

    2.0 1.0 1.2 1.1 2.2 and 2.1

    So in the end the entire table turns.

    The other, I want the leds light upwards from right to left. In the following order of the order:

    0.3 0.2 0.1 0.0

    1.0 2.0 3.0

    3.1 3.2 3.3 1.3-2.3

    1.1 1.2 2.1 and 2.2

    So in the end the entire table turns.

    Any help will be appreciated.


  • THE KEYBOARD LED LIGHT

    I want to illuminate the leds in front before through keyboard when i-e 1 is pressed 1led glow when you press the other 2 led lights please refer to understand what is the function of surround block i m not able to locate palette functional .wat sortof outputs data (data input.vi acquisition) .This code pin r is in fact to monitor keys but my requirement is the keyboard LED glow how.

    Well I tried, but I have problems and indicate the cut wire, I added the funcations as u said and what key presses and A poster to enum all at the same time I II in indicator but not actually done .please can help u with code

  • How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work

    How to set my keyboard led lighting. Enable, disable, how long to stay on after the last shot. I had the functions to do this before or I've forgotten or lost abilities. And FN & Z do not work. I would have the size as a Properties window opens. It was about 12 tabs for different frunctions. «Please help me someone...» I would be grateful! »

    Hi Aldo,.

    What is the manufacturer, brand and model number accurate and complete from your computer?  What is the manufacturer, the brand and model of your keyboard?  We can not help you without more information on your specific computer.

    If you want to go faster, simply contact the Group technical support from the manufacturer of the computer or go to their support site and ask them or look for this issue.  If you provide us with the above information, we will go to their website and see if we can find the instructions (if we can) – and they will be able to do it faster and better than we can.  The choice is yours.

    I hope this helps.

    Good luck!

  • buttons (F1, F2) lighting control doesn't work after driver update chart 10 bootcamp windows

    Hi, after last update graphics driver via the apple software update in windows 10 macbook pro retina 15 "(mid-2015), buttons (f1, f2) lighting control is responding more... tx for any help. Michael

    On the side of OS X, download BC drivers on a USB FlashDrive to aid

    Re-run setup.exe from the Bootcamp folder on the USB after Windows and test.

  • G5 will not start. LED light on. Fans before working.

    Early 2005 G5. running 10.5.8.

    G5 will not start. LED light (no flashes not but solid). Fans before working. Rear fans blowing not. Cleaned up the dust. A exploded during a down and will not restart. Any thoughts? Is that a bad diet? What I would do. Thanks for any help. I love this old computer and hope to keep fixed and working.

    Sam

    Some of the fundamental things include the pram/clock battery replacement

    since they may be dead; then with a power failure, sometimes the Mac

    do not restart. Usual power management unit & reset NVRAM/PRAM are

    methods that sometimes also used as a troubleshooting measure.

    • Reset the Mac chip power management: (see SMU)

    http://www.thexlab.com/FAQs/resetpmchip.html

    • How to reset NVRAM-LANDAU on your Mac - Apple Support

    A hard reset can sometimes be used, where the power is disconnected

    the logic board and power removed from grill; Then push the Start button / stop.

    (But maybe not. Several PowerMac computers, I had, some people found this helpful)

    You may also remove and reposition cards and other items

    the inside of the case, to be sure they are connected properly. Be sure to not

    In short anything, due to the static load or residual power in the circuits.

    The hour is late here, so I'm not going offline; If all goes well a battery original or novel, etc.

    can help to put it on again. Also sometimes the power supply has some faulty fans,

    circuits or capacitors, so they can be troublesome to repair or replace.

    Good luck in this case!

  • No led lights after installing Vista Ultimate

    Hi all

    a just installed Vista ultimate on my laptop and now the led lights on the keyboard doesn't light up

    Any ideas as to why?

    Dear Claire

    You have installed all the drivers, Toshiba tools and utilities for your laptop model?

  • X 4000 mouse have led light under the

    Can someone help if model answer Wireless Mouse 4000 X should show a bright LED under the.  Bought one of Currys recently no light show resumed but Manager he would not change because it works. I'm stuck with it but would like to know if there must be a bright LED under the.

    Thank you very much

    Rabo2, welcome to the forum.

    I saw several video reviews on the mouse.  There is a laser on the bottom, but nothing has been said about a LED light.

    Here's one of them that I saw:

Maybe you are looking for

  • How to restart with the recovery CD, when the CD player is not recognizing any cd/dvd?

    How do I restart my Toshiba laptop [Vista Home Premium SP2] with my recovery CD / else, what CD drive isn't grateful no matter what CD / DVD. I tried to restore any of the other points, but no date is available before sept2010. Ferris

  • How to move to the item in the listview

    Hi, I have a listView-> scroll from left to right. With listView item is a detail page (a whole screen), so if left drag the user directions will change from previous / next detail. The problem is to know how to activate the point specific index? Bef

  • my computer is very slow and really it's not so old now it tells me that I'm missing borlndmm.dat program

    my computer is very slow and really not that old now it tells me that I'm missing borlndmm.dat program and need to reinstall and I don't know how Original title: borlndmm.dat

  • XPS M1530 Factory Restore problem

    Hello I have installed Windows Vista, but finally, I want to restore my computer with the Dell factory restore. I press F8 at startup, but is no longer the "Repair my computer" option... How to restore my M1530 with the recovery partition?

  • Creating a new text brush

    I've created several brushes in the past for my tattoo photos, but when I try to create a new one now the predefined shape set is not clickable... don't know what I'm doing wrong...The steps that I use...1 NEW2. Enter the new text3 EDIT4. define a Br