HPSolution Center missing/Desktop

Cannot scan without HP Solution Center.  It was on my desk, but disappeared somehow.

In Add/Remove uninstall all HP, unplug the printer, reboot, install the latest version of the software / drivers from the HP site

Tags: Windows

Similar Questions

  • HP Pavilion Media Center m8200n Desktop PC upgrades tips and advice help.

    Hello everyone I have a HP Pavilion Media Center m8200n desktop PC that I'm looking to upgrade. Can someone please advice me on the following topics:

    Memory: What is the best possible that my system can contain that currently, I am running windows 7 ultimate 32 bit

    Video card: I'm looking to install a decent video with hdmi support card that my system can contain I am aware that I can not use certain cause of my ability video cards, the upgrade of the power may be an option. Can someone advice me please on these subjects, it will be very appreciated thanks everyone I'll be sure to rep and appreciate all help thanks.

    Without replacing the power supply, the EVGA NVIDIA GT 240 1 GB GDDR5 should work. This card is spec'd for a PSU with 18 amps of bus + 12 volts. This card can stretch your PSU, but give it a try.  I have this card in my system of m9200t.  This card will give the treatment a real helping hand from your video.

    Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

    How to replace a video card.

    Your PC will not work with memory dual channel and the processor will dictate the speed of transfer.  Wait for the upgrade of the processor until you see how the system works.

  • 8.1 Windoows install problem with the HP Media Center m1195c desktop PC

    I can't get Windows 8.1 installation runs on my HP Media Center m1195c desktop computer. At startup, the computer executes the disk, loads the files, then stops. After a few seconds the computer crashes with ablank screen, or boots in the installed version of Microsoft XP.

    I ran the utility Microsoft 8.1 Upgrade, and he says that this computer can be upgraded to Windows 8 (32-bit) are other steps should I take before Wndows 8 install. Such as switches to map parent or install/of-install a program?

    Thank you

    I solved this problem by disconencting all devices devices one at a time. It turns out that the video card is very old and there is no Windows 7 driver for this video card. The Installation of Microsoft gave no indication that the Board or the video driver installation was the problem. Testing and technical error was used. to solve the

  • Upgrade processor for a HP Pavilion Media Center m8400f desktop computer

    What is the highest AMD processor that I can go to this HP Pavilion Media Center m8400f Desktop System?

    The vehicle currently has a Phenom 9500 (A) 2.2 GHz (95W) 2000 MHz HyperTransport 1.0 Socket AM2 +.

    Thank you

    Processor AMD Phenom Quad 995 @2.6 Ghz

    Phenom II probably won't work because it is not in the list of CPUS supported as it has been reported by other members of the forum as not working even if a HP representative said the Member that he should.

  • How to disassemble / disassemble HP Media Center m7160n desktop

    Hi all

    I use a HP Media Center m7160n desktop computer, and recently the hard drive has been acting weird and continually gives me error e/s during startup. I read a lot of posts and tried many solutions until very recently I finally got another message at startup saying something like this: the hard drive error is iminent. Please back up the hard drive and replace it!

    Well, because the system tells me to replace the hard drive I think I should follow. However, when I removed the side cover of the Office Tower, everything is really effect. HP external USB Bay is in the way when I tried to access the hard drive, so I couldn't get out the hard drive to replace it with a new one. To be honest, I really want to delete all other parts in here without a guide, because I'm not very good with the mounting hardware. Therefore, I have to ask and see if anyone have disassemble your m7160n desktop before and could give me a practical guide so I can replace my hard drive?

    Thank you very much.

    Hello

    Here are the instructions to add or replace your hard drive

    http://support.HP.com/us-en/document/c00639696

    Also to save it for future use

    http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=5220&tmp_task=useCategory&LC=en&DLC=en&cc=us&product=470506

  • System restored automatically after the installation of updates & a few missing desktop icons.

    Original title: same set of updates on both computers due to different problems, one problem being a system restore.

    I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

    1 COMPUTER DETAILS:

    News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

    Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

    While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

    Update for Windows 7 for x 64-based systems (KB980846)
    Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
    Update for Windows 7 for x 64-based systems (KB982519)
    Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
    Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

    After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

    I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

    Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

    Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
    now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

    Since I installed the latest updates for 1 computer with no apparent problems:

    X 64-July Windows malicious software removal tool (KB890830) 2010
    Update security for Windows 7 for x 64-based systems (KB2032276)

    NEWS ON COMPUTER 2:

    The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

    Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

    At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
    an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

    A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

    BACK TO THE COMPUTER 1:

    Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

    Thanks for any help.

    No, I don't use the Norton removal tool.

    IN RE COMPUTER 1 ONLY:

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4 for good measure, reset Windows Update by...

    How to reset the Windows Update components?
    -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
    http://support.Microsoft.com/kb/971058

    5. restart & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Missing desktop icons, how to restore their return

    Original title: something that flocked to 2/3 of my desktop icons, is there a way to recover them?  I went through the properties and cannot replace them.
    About 2/3 of the icons on my desktop disappeared including office files and I can't replace them.  I'm going through properties to replace and everthing looks like it should work, but the icon is not replaced/renewed.  Is there something simple, that I can do?

    Hello University,.

    Thanks for the return of the response. Please visit the link below and let us know the status.  You are running service pack 3 and which version of Windows XP are you running?

    Your desktop icons are missing in Windows XP

    http://support.Microsoft.com/kb/330170

    • Microsoft Windows XP Professional
    • Microsoft Windows XP Home Edition
    • Microsoft Windows XP Tablet PC Edition
    • Microsoft Windows XP Media Center Edition 2005 Update Rollup 2
  • Driver Ethernet for HP Media Center m7167 desktop PC

    I had to restore using the discs. PC watch pilot missing ethernet and unable to connect to the internet.

    I can't find it in the driver downloads:

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=228&LC=en&DLC=en&cc=us β = en & product = 502610 〉

    XP Media Center edition.

    Can anyone help?

    Thank you

    Francisco

    Try this. It can be done from the recoveyr to the boot partition.

  • Pavilion Media Center m8430f Desktop video card replacement

    For about a month now my desktop computer Pavilion Media Center m8430f is at the origin of the yellow spots, blue stripes and dots to arrive on the screen then the computer hangs. Moniter is a G185h Acer which I use from 2010 when the original monitor is released.  I also get yellow wavy lines then in safe mode.

    So the thought is the video card went bad and needs replaced.  I picked up a Galaxy GeForce NVIDIA GT 610 to replace the NVIDIA GeForce 8500 GT. Two questions - will be my Pavilion Media Center m8430fbe to handle this card? How could I go on install?  I checked the instructions to install a new video card, but none of them relates to my machine.

    I thank you in advance for any help or insght, you can give in this case.

    According to the specifications of your desktop PC and your new GalaxyTech video card, it should be a good fit and work without problems.

    You connected a different view to make sure that was not the view South instead of the video card prior to purchase of the video card?

    I will try to find a video for you on how to replace the map.  Fact!

    The video I found must be adapted. Your original PCI Express X 16 video card not a probably not power connector 6 pin which is described in the video, or the connector on the fan.

    The video author does not mention it, but for safety reasons, remove the power connector. Unplugging everything. Working with the PC as it does and use a table or a workbench with everything external to the offline desktop.

    How to open the case

  • Missing Desktop Cleanup Wizard.

    The Desktop Cleanup Wizard

    I use my Desktop Cleanup Wizard & missing how can I get that back?

    Hi Kelley,

    ·         Missing from the start menu?

    I see you have a published similar thread. You can try the same as mentioned in the other thread. However, you can also consult the following.

    Method 1: Check if accessories is disabled in Windows components.

    1. with the CD Windows XP in the CD drive, click Start, and then click Control Panel.

    2. double-click on Add or remove programs.

    3. click on Add/Remove Windows components.

    4. in the Windows Components Wizard, click Accessories and utilities to have a checkbox.

    5. click Next and follow the wizard. See if you can access the Disk Cleanup Wizard.

    Method 2: Run the command to open the Disk Cleanup Wizard.

    a. click Startand then click run.

    (b) in Open, type cmdand then press ENTER.

    c. type cleanmgr.exe , and press ENTER.

    Report of the results.

  • Trash, missing desktop

    De : Steve W

    My deleted folder is missing on my Desk Top.  Does anyone know how can I get it back?

    De : Michael Solomon

    If you are referring to the trash, right-click on an empty space on the desktop, click on 'Customize' and click on "Change desktop icons" under tasks on the left column, a check mark next to the trash, and then click on apply and ok.

    --

    Michael Solomon
    Backup is a PC user's best friend
    DTS - L. Org: http://www.dts-l.org/

  • HP Pavilion Media Center m747On desktop computer. Not sure but I think I have Windows 8.

    I get an error message when I turn on the computer. The error is "RUNDLL error loading c:\windows|svonerg.dl the specified module is not found" got this message quite some time and do not know how to fix it.

    Your computer is originally shipped with XP Media Center Edition 2005.
    http://support.HP.com/us-en/document/c00619308
    If you have Windows 8, then it has been upgraded. A system file is missing or damaged. The easy response is to back up your important files and do a full restore of the Hp system - this will eliminate completely all files and you need to reinstall your software and re-download the updates of Windows.
    The hard method would be to read and execute the steps described in this document to support: http://support.hp.com/us-en/document/bph07850

  • missing desktop

    How can I get my office, tool bar and the start menu back on windows vista. all I have is a black screen. I can't right click on that screen that nothing happens

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
    The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
    Right click on the device and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure) is
    CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
    system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (making the system restore it)
    must be bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
    (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
    3.

    You can use another DVD that aren't copy protected but you you need to own
    Product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - do not type)
    parenthesis or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Missing desktop icons, system restore only a temporary fix

    Hi all, hope someone can help.  The shortcut on my desktop icons disappeared over the weekend.  Ran a system restore and they returned with the exception of the trash to recycle, thought that I could live with that.  After a time I keep the laptop, returned the next day and they all went again.  Ran to an older date system restore, they came back, but when I re - start they're all going again.  Checked the box 'show desktop' and it works in the bar side and summer menu control panel "taskbar and start to" all the boxes checked.  Have tried to re - define shortcuts, process works very well but the system usually show them.  Interestingly, the laptop starts, icons flash me momentarily, but don't show in fact once the system is clean awake.

    Ideas please
    Thank you

    Hello

    How to restore the Recycle Bin on the desktop under Vista
    http://www.Vistax64.com/tutorials/168608-Recycle-Bin-restore.html

    =======================================

    Maybe the icon problem is related to corruption.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    If no joy eventually a startup program has been wandering.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
    The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
    a small box in the lower-left - show for all users can check only).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
    they loaded and much more. This exceptionally effective utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
    starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
    The command - line String, product name, file Version, company name, location in the registry or the file system,
    and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • missing desktop icons and reappear at the start?

    I have a desktop PC with i7 and 16 GB. It runs on Windows 7 Pro 64-bit. Whenever I start my PC, all the desktop icons appear normally and quickly at the beginning. Then at the end of the initialization, all the desktop icons would change the folder symbols of gray before returning to their normal color symbols, one or both. The PC works fine otherwise. So, what's up with that?

    When google, many seem to have a similar problem, but none offer a REAL solution. Care to help? Please provide only the answers that have been soundproofed/accepted as a solution to the problem.

    Hello

    It is regrettable that the steps in my previous post did not help to solve the problem. This problem could occur due to the corruption of the file system or damaged user account.

    Please follow the steps mentioned below:

    Method 1: run (SFC Scan) System File Checker because this could be a problem with corruption in the Windows system files. System File Checker is a Microsoft Windows utility that allows users to search for and restore corruptions in Windows system files. Consult the following link;

    Use the System File Checker tool to repair missing or corrupted system files

    http://support.Microsoft.com/kb/929833/en-us

    Method 2:

    You can create a new user account on your computer, and then check.

    Create a new user account
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If you are not faced with the same question in a new user account, you can check the link below and use the steps provided to screw a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    Please an update on the status of the issue to help you further.

Maybe you are looking for

  • Create simple DVDs of several

    I have the DVD of my in-laws birthday, as well as each of their memorial services, each of the three events is on a separate DVD. All together, they come to less than 2 GB, so we want to copy the three files in one DVD for each of our sons, so that e

  • Compliance with the updates status optional uinstalled

    Hello I wonder if it's OK that the systems still appear not permitted if they have only a few optional upgrades uninstalled. Is it possible to have the green status of compliance without having to install optional updates since all apply in our envir

  • What does mean allandnone fonts?

    Helloyesterday I opened a pdf to verify that the font has been used and the box says allandnone police. No idea what this means?Thank you very much

  • HP pavilion 15 e011sr

    Cannot install driver on usb 3.0. Win7. http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=ru&CC=ru&DLC=ru&sw_lang=&product=5398... official website just win8 drv!

  • Line opening table when you tap on existing line

    HelloI use jdeveloper 11 and try to create this thing with an existing table:When I press one of the lines - extend-a new line will appear below with details (specifically in my case would be an iframe but lead-time for the moment not the point (=) D