HTML Article assemble dynamically, do scroll is not possible after the orientation change

Similar Questions

• On my trackpad scrolling does not work after the upgrade to 12.0

  On my trackpad scrolling does not work after update Firefox from version 3.6.28 to version 12. It normally works in Thunderbird, and other applications. It is a Lenovo T61 with XP Service Pack 3 and all drivers up to date. Version 3 seems to have bad memory leaks so I would like to upgrade, but I can't do it without scrolling. I would appreciate any advice.

  Try to change the pref ui.trackpoint_hack.enabled on the topic: page default config-1 to 0 or 1 to see if that makes the work button.
  
  Close and restart Firefox after changing the ui.trackpoint_hack.enabled preferably.

  • http://KB.mozillazine.org/about:config

• overflow: scroll does not work after the removal of the assets of the timeline/stage

  I have a light entertainment with a product range that must be horizontal scrolling, as it is too long to fit in the stadium, so when I put the overflow to 'reach' or 'auto' it works fine. This programming requires 10 different iterations since products vary from one region to another. My workflow is to duplicate the work of master and removal of the product is not available in this region, the visuals of reflow and publish.

  When I delete the scene assets, that the horizontal scroll bar is displayed in the browser, but it's something outside the stage area does not record - is content there, but the scroll bar will not move.

  Does anyone have any ideas as to why this is happening?

  In case someone else has the same problem: I just put the 'visible' overflow and let the site CSS control scroll bars, which is ideal in any case.

• backkey does not work after the state change

  Hello

  I have a simple vision containing a "Channels" list in the State and a histogram in State "Charts".

  This point of view has an assigned custom backkeyhandler that simply changes the status back to 'Channels' if backkey material has been activated in mode "Charts".

  The application starts and presents two items in his list.

  If I touch one of the its entry, I load the data for this article and change the "Charts" view that displays the bar graph.

  By pressing the previous button does nothing in the emulator and brings back me to the homescreen on my nexus s.

  But if I touch the graph bars once before pressing the previous button, it takes back me to the State "Charts".

  Using the debugger with a breakpoint in the confirmed following function, this function will be not be called after a state change if I don't touch the graph bar.

  If it is possible to use two views for the presentation of the list and graphics, I need the backkey to work in different States, because I want to use the States to

  use different layouts for tablets vs phones.

  Any ideas?

  Michael

  protected

  function view1_backKeyPressedHandler(event:FlexEvent): Sub

  {

  TODO self-generating method stub

  if (currentState == 'Charts' ) {}

  Event.preventDefault ();

  setCurrentState)

  'Channels' );

  }

  }

  Hey,.

  The problem is that the focus of the scene is directed to the list, once it has been removed from the display list.  Here's what happens:

  1) tap on the item "Item 1."

  (2) stage.focus is automatically set to this article

  (3) change the graphics state

  (4) list is removed from the display list

  5) press return

  (6) no event is triggered because of the list has the focus but is not on the display list

  To work around this problem, set to null stage.focus just after changing state.  If your list change manager would look like this:

  protected function list1_changeHandler(event:IndexChangeEvent):void

  {

  setCurrentState ("Charts");

  internship. Focus = null;

  }

  In my internal tests with 4.5.1 this solves your problems.

  Let me know if this does not work.

  Chiedo

• LR update is not possible after the CC licenses

  Hi all

  I had a testinstallation LR 6.1 and bought the CC (Fotography) yesterday. My OS is Win7.1 Pro (64-bit). While LR is able to synchronize with mobile LR, now (so CC is turned on), I can't update to LR6.5. The update function is grayed out. So I can't import Fuji RAW X-Pro2. Help / about LR... tells me that Adobe RAW 9.0 is used. A manual installation of 9.5 does not change this.

  I have tried several different LR installation procedures, scorched stays / in the CC app, used the clean tool CC, renamed SLcache, restarted,... nothing worked.

  Can someone tell me what I should do to get a recent update?

  Best regards, Dieter

  I found a solution on the net. I had to remove a file from update preferences, then it worked.

• Synaptics touchpad two fingers scrolling does not work in the player to develop modern UI application Windows 8.1

  I have a HP Envy TouchSmart UltraBook 4-1161er. Two fingers to scroll worked well in all modern user interface applications that come with the pre-installed operating system Windows 8.1, but the situation changed after the upgrade to Windows 8.1. Now this excellent and very useful two fingers scrolling does not work in the updated reader application. How to make it work?

  If the problem is in the drivers, maybe, install the drivers the latest may correct this?

  I tried to find the latest drivers for the touchpad Synptics in my ultrabook on the HP website, but it's the same old v16.5.3.3, I already have (published in may 2013). Synatics official site contains a link to the latest touchpad driver pack v17.0.19. Can I install it?

  I would try to install the Windows 8.1 (64-bit) driver Synaptics touchpad available in the download section of your sleekbook web support before using compatibility mode.  If the current driver does not work for you, try the earlier versions available .

  If you have no positive results, then use the compatibility mode (select Windows 8) on all three Windows 8.1 synaptics touchpad drivers, starting with the most recent.

  To use compatibility mode to install the driver just softpaq to the right, click on the file and choose troubleshoot compatibility. Select Windows 8 and run the installer.

  The following video has a decent explanation, but the Narrator does not get to the point for a bit. Go directly to the minute 4 and watch it from there.

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• Does not start after the upgrade to 1.5.

  Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

  All ideas

  No problems in the past with edge since September 2012.

  =============

  Laptop HP Pavilion dv7-2185dx

  Dv7-2185dx product name

  #ABA product number NV023UA

  Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

  The microprocessor Cache L2 6 MB Cache memory

  6144 MB of memory

  Memory Max 8192MB

  Graphic ATI Mobility Radeon HD 4650 (M96)

  Video memory up to 2815 MB (1024 MB dedicated)

  500 GB (5400 RPM) hard drive

  Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

  17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

  Fax/Modem high speed 56 k modem

  Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

  Wireless Connectivity Intel WiFi Link 5100AGN

  The Altec Lansing SRS Premium Sound technology with subwoofer

  101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

  Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

  External ports

  5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

  4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

  2 headphone

  1 microphone input

  HDMI

  1 VGA (15-pin)

  eSATA + USB 2.0

  1 RJ-11 (modem)

  1 RJ - 45 (LAN)

  expansion port for computer 1 cell 3

  1 IEEE 1394

  irewire (4 pin)

  1 consumer IR (remote receiver)

  Other devices HP Webcam with integrated digital microphone

  Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

  Weight lbs 7,74

  Housing for Kensington MicroSaver Security lock

  Turn on the password

  Accepts 3rd party locking safety devices

  Software

  Operating system:

  Genuine Windows Vista Home Premium 64-bit with Service Pack 1

  
  

  Hi, people.

  I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

  Thank you

  -Elaine

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Computer does not start after the screen of the bios, Compaq Presario SR1023WM

  Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

  Problem: The computer does not start after the bios screen.

  Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

  The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

  I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

  I have a pretty strong understanding of computer repair, so feel free to give me something to try.

  If you need more information out of me, let me know as well.

  Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

  At the back of the pc is the condition of the PSU led green or flashing?

• computer does not start after the Windows XP logo window

  Windows xp home edition
  service pack 2
  Dell inspiron 1501

  1. computer does not start after the Windows XP logo window
  2 works well in safe mode, even connect to the external monitor
  3. I reinstalled xp many times, problem stil exist.

  All the answers?

  Hi dhanushm,

  1. What happens after the Windows logo screen?
  2. You receive an error message?
  3. You have security software installed on the computer?
  4. Have you performed an installation clean Windows XP and even after that this problem exists?

  Method 1

  As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

  Method 2

  If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  http://support.Microsoft.com/kb/318027

• typed letters are not visible after the end of the custom field in editfield

  class CustomEditField extends EditField {}

  CustomEditField (String text) {}

  Super("",Text);

  }

  public void layout (int width, int height) {}

  Super.Layout (getPreferredWidth (), getPreferredHeight ());

  setExtent (getPreferredWidth (), getPreferredHeight ());

  }

  public int getPreferredHeight() {}

  Return super.getPreferredHeight ();

  }

  public int getPreferredWidth() {}

  return (Display.getWidth () * 2/3);

  }

  }

  It's my edit custom field.

  When I type on this field and reached end of the field, can't see the letters after that, but I can type (the only thing is to type letters are not visible after the end of the field)

  What is the solution

  I'm sure that you must explicitly enable scrolling. See Manager javadocs.

  In addition, you limit the scope of your field, which may also fail to scroll.

• Don't buy not possible after trial - send them free license to me

  Please send a free license for Lr and Ps for me because subscription purchase is defective not possible in the Principality of Liechtenstein (must be equal to the Switzerland).

  Translation of 4. : "Purchase not available. In the yellow box: "a subscription of the CC is currently not available in your country or region (Liechtenstein)."

  Please solve this problem as soon as possible. The Liechtenstein and the Switzerland are in the same economic territory. It is an IP address error in the Adobe store system. IP addresses of the Liechtenstein should be treated identically as those of the Switzerland.

  The message below almost caused a heart attack for me. For dangerous deadly stress Adobe is originally for me, I expect at least for free a lifetime license of the ' most popular: all applications ' subscription for me. This lighten off my anger free for Adobe.

  Best regards

  Roland

  

  This is an open forum, not Adobe support... Click below to contact Adobe staff for help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Screenshots do not work after the IOS10.

  Screenshots do not work after the IOS10. I've tried several apps and the iPhone and iPad.

  Help please.

  < re-titled by host >

  You hold down the sleep/wake button first, the fast, click the Home button?

  Have you tried a hard reset of your iPad by pressing the sleep/wake and Home buttons simultaneously until your iPad goes to black and restarts with the Apple logo and then release the buttons?

  Good luck!