HTML5 error reading on Youtube
I started to experience problems reading for HTML5, flash works fine.
What's happening... I click on a video to watch. Loading the page and I see a still image in the window playing with HTML5 in the center of it. I click on it to start playing, as I did many, many times before and it acts like it will start to play, but then nothing. All I see in the bottom left of the playback window is the error, as well as the name of the video. If I have the strength to play with Flash, right click on the video it works fine.
Currently on 10.11.5 and Safari 9.1.1
I emptied the cache via the menu develop, reset safari and erased from history, rebooted computer... nothing seems to work. The only recent thing that I did is turn off WebGL to avoid random freezing that I noted in 10.11.5 and yesterday was a flash update.
Any suggestions?
Hello
In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site
Then quit and relaunch Safari then try a video.
Tags: Mac OS & System Software
Similar Questions
-
I have a START BLADE OF DARKNESS game, whenever I try to install an error message appears saying: Error 1305. Error reading the file.
I don't have a clue guys! Any suggestions would be greatly appreciated.
Thank you...
Micky.b
[Moved from comments]
Hey Micky,
Until we provide troubleshooting steps, we would like to know as a result of information from you.
(1) what version of the Windows operating system you have installed on your computer?
(2) how you try to install the game? What is a disk installation or a set of file?
If you try to install the game on Windows 7 or Windows 8 so I would like to inform you that there are few games that are not compatible with these operating systems. You should check from the link below. However if it shows that the game is not compatible then you can install the game in compatibility mode.
Compatibility Center
http://www.Microsoft.com/en-in/Windows/compatibility/WIN8/CompatCenter/home?language=en-us '
You can follow the links given below to install the game in compatibility mode.
For Windows Vista: Make older programs run in this version of Windows
http://Windows.Microsoft.com/en-in/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
For Windows 7: make older programs run in this version of Windows
http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows
For Windows 8: make the programs more compatible with this version of Windows
http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows
If you still experience the issue I suggest you to contact forum support Severance Blade Of Darkness.
Feel free to write us if you have any further questions. We will be happy to help you.
-
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
I get the following error message when you try to access one of my hotmail accounts:
Internal Server Error - read the server has encountered an internal error or misconfiguration and was unable to respond to your request. Reference #3.269102cc.1330033628.4ef0aa7f.What is this error and how to fix it?Thanks EllieI get the same message... must be a problem with hotmail.
-
How to restore the documents now say "error reading file"?
I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.
Help!
Hello
1. what documents do you speak?
2. were you able to view these files before?
3. don't you make recent changes?
I suggest you try to restore the computer to an earlier point and check if it helps:
http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
It will be useful.
-
Windows doesn't let me download an application from my library to the city. It is an application used to download their books. I have Vista Home Premium on my HP Pavilion.
I start the download, the process begins, and then a small dialog box opens saying "Unknown Publisher" and the choice of 'run' or 'Cancel '. I chose 'run', it seems it will continue then a little screen pops up saying "error reading setup initialization file." I "ve never had no problem download at this point.
For the same problem, I tried the following and still no luck:
I've got "pop-up blocker" turned off.
I disabled the "Inprivate filtering",
I turned off my "firewall" temprarilyAny other suggestions for this problem?
Thanks for your help!
Winifred_MHi Winifred_M,
Thanks for posting on the Forum of answers.
If you can provide a link to the application, we can try to recreate the issue.
Otherwise, it is perhaps a question that you should take with the Publisher of the software.However, you can try to use the Windows Installer CleanUp utility:
When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.
Do not worry. Windows Installer CleanUp Utility may be able to help. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.
Download the Windows Installer CleanUp utilityWe have updated Windows Installer CleanUp Utility. This version of the Windows Installer CleanUp utility works correctly in all versions, 32-bit and 64-bit Microsoft Windows. If you have an earlier version installed on your computer, we recommend that you download and install this latest version.
You must be logged on to Windows with a user account is an administrator on the computer to run Windows Installer CleanUp Utility. For more information about how to install and run Windows Installer CleanUp Utility, see the section "more information".
You can download Windows Install CleanUp Utility starting from Microsoft Download Center:
Download the Windows Installer Cleanup Utility package now.
(http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)Copied from http://support.microsoft.com/kb/290301
Please let us know if that helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error reading from a text file?
Hello
I am trying to add a NI SOFTMOTION TABLE in my project using a text file that contains the data points I want to use to make a contour move, and Labview opens but returns an error message me "ERROR READING FILE". In fact, I see all my points in the table in Labview, but it creates one more line to each column where a "unreadable" message just wrote.
No idea how solve it?
Thanks in advance!
Just shooting in the dark:
in the photo, it seems that there is a problem with the last line of the file,
This is an "empty" one (only an end of line).
What happens if you remove this line empty?
Marco
-
"Error reading TrayIcon1 - > Visible: Canoe Create Shelll Notificationn Icon"
I get this error when I reboot XP anyone know why?
"" Error reading TrayIcon1-> Visible: Canoe Create Shelll Notificationn Icon ".
Using a KVM switch?
Are you running Windows XP?
Have you even tried to use Google to search for the message and see what are the solutions out there on the World Wide Web for this?
Here is an example of a search result, Google can help:
http://www.dllshepherd.NET/2011/01/fixing-error-error-reading-trayicon1.html
Looking at "alternatives" for this error message on the WWW appears to delay the launch of this program by using a third-party application. Glary Utilities is such an animal, but there are other options as well.
-
No sound from the Pavillion dv6 Notebook pc also error message on Youtube
No sound on computer error message on youtube more
Hello
Try the following - this requires that your Windows 7 running.
Download IDT Audio Installer on the link below and save it in your downloads folder.
One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.
When you are finished, download and reinstall the Chipset driver from the link below.
Chipset Driver - Windows 7 32 bit.
After reinstalling, shut down the laptop, unplug the AC adapter and then remove the battery. Press and hold the Power button for 30 seconds. Reinsert the battery and plug in the AC adapter.
Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.
Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete. Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation. Once this done, do a right-click the speaker icon in the taskbar and select playback devices. 'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.
Regarding the problem with Flash Player when you try to view Youtube, first of all, download the Flash uninstall utility on the link below and save it in your downloads folder.
Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller. After this has completed, restart the laptop.
Then (unless you already have it), download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before download.
Close all browser windows before you run the installer of Flash.
Start Firefox and see if the videos etc. play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the ActiveX component. Once completed, restart Internet Explorer.
Kind regards
DP - K
-
train Simulator says "error reading train database file"
I have question for train simulator? I can't play the game more that comes with the following error.
Error reading train database file, file: line: 114How can I fix?I'm using windows xp with the latest service pack.I hope for a quick response.Hello
1. don't you make changes to the computer until the problem occurred?
2. are you play online or is installed on the computer?
If it is installed on the computer then I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/303032
If the problem persists then I suggest you send your query in the link below.
http://www.Microsoft.com/games/trainsimulator/support.aspx
Hope this information is useful.
-
My os is windows xp (sp3) I can not solve. Help me, providing a perfect solution
the error is "error reading the volume of c.Hi Nithin 1990,Run the check disk (chkdsk) to solve this problem.Here is an article that will give you the information to do the same: -
Error reading file Photo Editor
I have a Kodak EasyShare M853. When I download the videos/photos to my computer, I go to the Start Menu, then pictures. I can see the thumbnails load, but when I click to see the images (majority around 1.1 MB), Microsoft Photo Editor (MPE) opens with a reading of l 'oading' window - and goes directly into a pop up window reading - "!" Error reading file. "I can open the files with Internet Explorer and paint, but it cannot change them as needed as the EMT cannot read the file.
My version of Microsoft Photo Editor is 3.0.2.3 and Vista Home Premium operating system
Before I had a Kodak DX7440, and never had any problems!
A previous comment to Brookeanna did not have a real solution!Hi Ben Verhoof,.
Thank you for writing to Microsoft answers Community Forums.
Microsoft Photo Editor is supplied with Microsoft Office 97 and the stand-alone versions of Microsoft Word 97 and Microsoft PowerPoint 97. Microsoft Photo Editor is installed when you perform a custom installation, or full from the CD-ROM.
What is the format of the files you are trying to view?
The link below talks about Photo Editor. Try to look at the troubleshooting section in the article below
General information about Microsoft Photo Editor:
http://support.Microsoft.com/kb/169938
If you have still questions I recommend checking out the resources of the Office Suite and would be better suited to the community of the Office Suite. This is a support forum for Windows Vista. Please visit the link below to find a community that will provide the support you want.
http://www.Microsoft.com/Office/Community/en-us/default.mspx
I hope this helps.
Let us know if you need more assistance.
Kind regards
Sharath
Microsoft Answers Support Engineer
-
Error reading file in Photo Editor
I have a Kodak EasyShare C813. When I download the videos/photos to my computer, I go to the Start Menu, then pictures. I can see the thumbnails load, but when I click to see the images (majority around 1.1 MB), Microsoft Photo Editor (MPE) opens with a reading of l 'oading' window - and goes directly into a pop up window reading - "!" Error reading file. "I can open the files with Internet Explorer and paint, but it cannot change them as needed as the EMT cannot read the file.
My version of Microsoft Photo Editor is 3.0.2.3Hello BROOKEANNA,
Thank you for using the Microsoft Windows Vista Forums.
The pictures you are not able to load, they are in a different format that the other photos you can see? This subject has always taken place or something recently? You have changed something with your operating system before this problem?
Please let us know status!
Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
When I download pictures from the memory card and try to visualize a small box arrives marked Microsoft Photo Editior error reading file
Microsoft Photo Editor is an obsolete program that
has been abandoned in 2003. Might be interesting to try
Set your image to a more recent application associations...
Windows Live Photo Gallery for example.Windows Vista - how to associate a file Extension
Type with a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.html -
error code after you download security ca roadrunner (application error reads cannot read memory) and some numbers...
Try a system restore to a Date before the problem began:
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
http://www.windowsvistauserguide.com/system_restore.htm
Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
Lightning don't talk to Google Calendar - problem with cookies?
Execution of Thunderbird 31.1.0 with Lightning 1.0 and the module supplier of Google. I maintain four different calendars with google (work room, home, other, conf) account. When I woke up today all my calendars worked. They have been set up in light
-
Linux on Satellite click Mini L9W - no experience?
I'll try to run Linux on my Mini click. I was wondering if someone had made an attempt?Maybe we could share the progress here? I tried the Magic Stick for the Asus T100TA in the hope that it would give me a head start,He began to start but the screen
-
Change the aspect ratio from 4:3 to 16:9
How can I change the proportions of a music video for 4:3 and 16:9 in iMovie? The original one I have is in 4:3 format, but this is incorrect. It should have been in 16 / 9. That is why the image is totally biased. Everything seems too big and weird.
-
How to program the display of a 2D array index?
Hi guys,. I am interested to do the 2D to the front table to move to the top rank by rank of itself when the program runs. Is there a way to program the display of the index? Thank you! Kind regards Vanessa
-
What kind of clearance is a folder receives from its parent folder?
Vista and windows xp