HTTP, HTTPS, FTP diagnostic error 12007

Similar Questions

• Http, https, ftp with error code 12007 problems.

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  The problem started after a virus attached.  I use wifi on a series of mini laptop 1011 dell with Windows XP. I worked this problem via the internet with little or no help.  I used Malwarebytes to clean up.  I can't uninstall microsoft essentials.  It does not work and my firewall is disabled.  I can't install new software for safety due to being offline with the net.  Needs help!

  Restore the system to factory settings.

  Even though I know you love clean and keep all your installed applications to configure how they are and without having to restore your documents/photos/music/emails/contacts/bookmarks and others of your last backup - but the truth is that if you're having this much of the problems already - virus/malware that attacks you and infested/infected you probably had friends and probably did permanent damage.

  You can try to do a cleanse to get to a point where you can save some extra stuff.  Some of them you may need to use another computer to download stuff on and then transfer it on this machine.  At the end of the day - is the only way to be sure you're 100% 'good to go' has restoring factory.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Internet does not work, make HTTP: error 12007 connection

  * original title - error 12007 I need help! *

  I have a Windows XP with Service Pack 3 internet does not work. I got tired, he works with this http://answers.microsoft.com/en-us/ie/forum/ie8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4aaf-843c-1c781dc8053f post, but when I tried it on my netbook my windows update comes out of @%SystemRoot%\system32\shell32.dll,-22580

  I have an idea I have a missing or corrupted WinSock, but I'm not sure.

  Diagnosis of last run time: 23/01/12-18:52:53

  WinSock diagnostic WinSock status attmpting error information to validate the WinSock providers database: 2 error not all entries could be found in the basic services provider winsock catalog. A reboot is required. user redirection of information in support of the appeal. user redirection of information in support of the appeal. Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter Info Network connection: name = Wireless 3 network, device = Broadcom 802. 1 1 b/g WLAN, LAN = Media Type, type SubMedia = wireless Info Network connection: name = connection to the network of Local 2, device = Atheros AR8132 PCI - E Fast Ethernet Controller, Media Type = LAN, type SubMedia LAN = Info Connections Ethernet and wireless available, ask the user for selection action User input required: select network connection Info WiFi selected State of the network adapter Info The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Hello

  You can refer to the suggestion provided by Divya the similar thread with a possible solution:

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/error-12007-the-server-name-or-address-could-not/2cbfb8a8-8970-4AAF-843c-1c781dc8053f

• The interval can be changed to conn/http/ftp

  I think I'm an overwhelming my BB (old version NCR) server with too much conn, http and ftp check the cause for suddenly show a ton of purple spinning icons on all these tests for almost all my monitored servers. Is there a way to reduce the frequency of these checks for some servers?

  For example, I can specify the frequency of running scripts to post for example by adding a ";". " ' at the end of the trial, is there something similar for conn, http, ftp &?

  No, all the network tests are based on the same interval.

  What is the current value of BBNETSLEEP?

  you could always use the external fping.sh for connectivity test (conn) and set a specific time limit for this increase (or decrease BBNETSLEEP). To disable the test of conn in Sib, located in bbdef-.sh CONNTEST = FALSE.

  Also, what platform and version are you on?

• Error: 12007

  I downloaded a program called Driver Checker - then updated all my drivers. Now, I can't use my wireless connection! I restarted. I've probably got the wrong driver? How can I get the right one back please? Steve ps I also got:

  	Network connection: name = connection to the perimeter network Wireless 3 = LAN - Express AS IEEE 802.11 g miniPCI adapt #2, MediaType = LAN, type = Wireless
  Info	Network connection: name = Local Area Connection 3, Device = Intel(r) PRO/100 VE Network Connection, MediaType = LAN, type = LAN
  Info	Network connection: name = 1394 connection, device = 1394 Net Adapter, MediaType = LAN, type = 1394
  Info	Network connection: name = 3 Modem USB, device = HDAUDIO SoftV92 Data Fax Modem with SmartCP, MediaType = PHONE, type = NONE
  Info	Connections Ethernet and wireless available, ask the user for selection
  action	User input required: select network connection
  Info	WiFi selected

  and

  FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
  warn	HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established

  And now you know why these programs "driver checker" are useless. I hope that you do not have anything for her. Yes, you must install the correct drivers for your wireless network card. General information of pilots:

  The first law of Driver Updates is "if it's not broken, don't fix it". Normally if everything works, you want to leave things as they are. The exception is that heavy players usually want to update their video and sound drivers for every last bit of absolute performance of the equipment to get the best frame rate. If you are not one of these people, you need not update your drivers, if there is no problem you're trying to solve.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - System Information for Windows

  If you have installed the drivers from Windows Update, you can roll them back:

  How to roll back a device driver in Windows XP - http://tinyurl.com/86yb6 MS - MVP - Elephant Boy computers - Don ' t Panic!

• error 12007 tengo UN. Como puedo solucionarlo?

  I have an error 12007 y me indicates that no tengo instlado el useful red o los red necessary device drivers. Como puedo hacer para solucionarlo? No puedo access has Internet explore

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Connection Wi - Fi works very well, sometimes, then get the error 12007 farm in unexpected ways.

  works fine sometimes then leaves get error 12007 ?

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if they help.

  Step 1:

  I suggest you to update your wireless network card drivers and check if that helps.

  How to manage devices in Windows XP

  Step 2:

  Follow these steps and check:

  a. Click Start, click Run, type 'cmd', go to the command prompt and type in: "ipconfig/flushdns".
  (b) and then click OK.
  c. then type ' ipconfig / renew ' and press Ok.
  d. then type "netsh int ip reset resetlog.txt" and click Ok.
  e. restart your system and check.

• Typekit site via ftp download error

  Hello

  I get this error when I trie to download mys site via ftp

  Error:

  Could not generate code to activate one or several web fonts on the 'Home' page [Error 403: no Typekit access]

  I have access typekit with my subscription. I need to download this site with new information, so I hope someone can help out me. Somehow the Chat helpdesk is not available when I use the contact options...

  Thank you for your answer! I fear that we may never know what caused it... I tried again this morning and the error disappeared! I have to say I've known mistakes strange before typekit. As "Typekit is not included in your package" as it is, he always worked, so I didn't bother to... Funny enough this warning disappeared, then it stopped working... Anyway, today he works, and all is well. I'll let you know if it happens again. Thnx for your efforts!

• The name server error 12007 or address cannot be resolved. could not do HTTP, HTTPS or FTP connections

  Identical to ramanandg75, have the error code 12007. made it the winsock reset but I'm still unable to access the internet via broadband, my dial-up access is not affected. This started only after a microsoft update (now some time ago) tried to get my son to settle the problem but always too busy (children!).
  Hope you can help.

  dswhitmarsh,
  I would like to start your computer for all malware\viruses by analysis.  Here is an article that has some good information to get rid of infections: get rid of the malware.

  Then you need to update the driver for your network card on the site of the manufacturer of the card.

  Let us know the results. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Error-type in" features on HTTP/FTP/SMTP screw close?

  This is one for the developers of NEITHER, or maybe people of help documentation.  I noticed before, but never had time to questioning officially it.

  The screws 'close' in the libraries of the project LabVIEWSMTPClient, LabVIEWHTTPClient and NI_FTP indicates that they "error-type in ' features, unlike most of the primitives 'close' for TCP, UDP, BT, DS, and even the VI 'close' in the library of NI_WebDAV, which States that they fulfill their function even in the presence of an error in incoming.  What seems inconsistent.  These Protocol libraries ignore the usual mechanisms of closing / prepared if "error in" is set to true, or is the incorrect documentation?

  Dave

  The documentation is incorrect... all three of these narrow screws (SMTP, HTTP, and FTP) release properly resources regardless of the value of the error in the terminal.

  Jonathan, please drop a CAR documentation on this issue.

• Impossible to get online - reading HTTP/HTTPS/FTP Firewall problem

  I cannot get online and diagnosis to assess the problem.

  The error I get indicates that it is a firewall problem; However, when I disabled my firewall and tried to connect, it still wouldn't let me.  I ran the diagnostic and received an error message that passport.com certificate is expired.  It is said that the system could not connect over HTTP/HTTPS and FTP (passive) was able to connect.  Help, please.  Thank you!

  Sorry try this first...

  You can change the behavior of the Internet Connection Firewall by turning on various ICMP options, such as allow an incoming echo request, allow incoming timestamp request, allow incoming router requestand Allow redirect. Brief description of these options appear on the ICMP tab

  If your network uses Internet connection sharing to provide Internet access to multiple computers, it is recommended to activate the shared Internet connection on the Internet Connection Firewall. However, you can activate the shared Internet connection and Firewall Internet connection separately. It's a good idea to enable the ICF on the Internet connection on any Microsoft Windows XP computer that is connected directly to the Internet.

  Internet Connection Firewall can also help protect a single computer connected to the Internet. If you have a single computer connected to the Internet with a cable modem, a DSL modem, or a dial-up modem, Internet Connection Firewall protects your Internet connection. Do not cut the ICF for virtual private network (VPN) connections because Internet Connection Firewall interferes with file sharing and other VPN functions.

  ??????????????????????????????????????????????????????????????????????????????????????????????   OR

  http://support.Microsoft.com/kb/936211/en-us read up on that let me know if this helped.

  Internal modem

  To restart an internal modem, you must restart the computer. If you still experience network connectivity problems after you restart the computer, go to step 2. If you connect to the Internet using a router, there may be a problem with the configuration settings, and they must be updated. To determine if a network connectivity problem is caused by a bad configuration or a problem with the router, you can bypass the router and connect your computer directly to the modem.

  Warning Connect your computer directly to the Internet may be left vulnerable to attacks. To protect the computer against attacks, make sure that a firewall is installed and that the firewall is enabled on your computer. To learn more about the Windows Firewall that is included in Windows Vista, see the "Windows Firewall" section.

  Windows Firewall

  Windows Vista includes a firewall, called Windows Firewall. By default, the Windows Firewall is enabled. However, you should always check that the Windows Firewall is turned on before you connect the computer to the Internet. To verify that Windows Firewall is turned on, follow these steps:

  1. Click Startand then click Control Panel.
  2. In the search box in the upper right corner of Control Panel, type security.
  3. In the search results that appear, click the icon or the link to the Security Center. In the window that appears, you will see four bars that are titled firewall, automatic updating, malware protection, and other security settings.
  4. Click the arrow to the right in the firewall bar to expand the bar. The extended bar will display one of the following three options:
     1. If the firewall bar is green, it means that the firewall is enabled.
     2. If the firewall bar is red, you may see a message that the Windows Firewall is disabled. To turn on the Windows Firewall and cause the firewall bar to the center of safety to turn green, click activate now.
     3. If the firewall bar is red, and the message describes a problem with a third-party firewall program, we recommend that you disconnect the computer from the network and then contact the vendor of the firewall program for more information on how to activate the third-party firewall program.

• Cannot access internet, check HTTP, FTP and HTTPS port settings

  Using Windows XP, cannot access internet.  The problems notified that Windows cannot connect Internet using HTTP HTTPS or FTP.  Said that it's probably caused by the settings of the firewall.  Adiveses to check the settings of the firewall for HTTP (80) port, the HTTPS port (443) and FTP port (21).  Did not inform how to do this.

  Any suggestion would be appreciated.

  Hello

  · What version of internet explore are you working on?

  · Were there any changes made on the computer before the show?

  I suggest you try the steps listed in the links below: how to manually open ports in Internet Connection Firewall in Windows XP: http://support.microsoft.com/kb/308127

  "Internet Explorer cannot display the webpage" error when you view a Web site in Internet Explorer: http://support.microsoft.com/kb/956196

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• Cannot connect to the XMLDB via http, ftp, webdav

  I can connect to XDB through a DEV instance on the same server, but cannot connect to the instance SCIDEV. The differences are THAT DEV is nls_characterset WE8MSWIN1252. SCIDEV is AL32UTF8. DEV has ports 8080 and 2100. SCIDEV has ports 8089 and 2102. HTTP request continuously a user / password without error. Watch FTP authentication failed. WebDAV continually requires a user name and password. I've tried a few things with no luck yet. What should I do to be able to connect? It is also published in Oracle support as SR 3-3043961271 technique. Please do not share the files downloaded in this forum SR.
  
  Follow the different SQL commands. Running Windows2003 Server and Windows XP SP2 client.

  SYSTEM@scidev> select * from v$version;
  Oracle Database 11g Release 11.2.0.2.0 - Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE    11.2.0.2.0      Production
  TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
  NLSRTL Version 11.2.0.2.0 - Production
  
  5 rows selected.
  
  SYSTEM@scidev> select * from nls_session_parameters;
  
  PARAMETER                                VALUE
  ---------------------------------------- ---------------------------------------
  NLS_LANGUAGE                             AMERICAN
  NLS_TERRITORY                            AMERICA
  NLS_CURRENCY                             $
  NLS_ISO_CURRENCY                         AMERICA
  NLS_NUMERIC_CHARACTERS                   .,
  NLS_CALENDAR                             GREGORIAN
  NLS_DATE_FORMAT                          DD-MON-RR
  NLS_DATE_LANGUAGE                        AMERICAN
  NLS_SORT                                 BINARY
  NLS_TIME_FORMAT                          HH.MI.SSXFF AM
  NLS_TIMESTAMP_FORMAT                     DD-MON-RR HH.MI.SSXFF AM
  NLS_TIME_TZ_FORMAT                       HH.MI.SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT                  DD-MON-RR HH.MI.SSXFF AM TZR
  NLS_DUAL_CURRENCY                        $
  NLS_COMP                                 BINARY
  NLS_LENGTH_SEMANTICS                     BYTE
  NLS_NCHAR_CONV_EXCP                      FALSE
  
  17 rows selected.
  
  SYSTEM@scidev> select * from nls_database_parameters;
  
  PARAMETER                                VALUE
  ---------------------------------------- ---------------------------------------
  NLS_NCHAR_CHARACTERSET                   AL16UTF16
  NLS_LANGUAGE                             AMERICAN
  NLS_TERRITORY                            AMERICA
  NLS_CURRENCY                             $
  NLS_ISO_CURRENCY                         AMERICA
  NLS_NUMERIC_CHARACTERS                   .,
  NLS_CHARACTERSET                         AL32UTF8
  NLS_CALENDAR                             GREGORIAN
  NLS_DATE_FORMAT                          DD-MON-RR
  NLS_DATE_LANGUAGE                        AMERICAN
  NLS_SORT                                 BINARY
  NLS_TIME_FORMAT                          HH.MI.SSXFF AM
  NLS_TIMESTAMP_FORMAT                     DD-MON-RR HH.MI.SSXFF AM
  NLS_TIME_TZ_FORMAT                       HH.MI.SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT                  DD-MON-RR HH.MI.SSXFF AM TZR
  NLS_DUAL_CURRENCY                        $
  NLS_COMP                                 BINARY
  NLS_LENGTH_SEMANTICS                     BYTE
  NLS_NCHAR_CONV_EXCP                      FALSE
  NLS_RDBMS_VERSION                        11.2.0.2.0
  
  20 rows selected.
  
  SYSTEM@scidev> select * from dba_errors;
  
  no rows selected
  
  SYSTEM@scidev> select count(*) from dba_objects
    2  where owner='XDB' and status='INVALID';
  
         COUNT(*)
  ---------------
                0
  
  1 row selected.
  
  SYSTEM@scidev> select comp_name, status, version from dba_registry
    2  where comp_name='Oracle XML Database';
  
  COMP_NAME
  ---------------------------------------------------------------------------------
  STATUS                                       VERSION
  -------------------------------------------- ------------------------------
  Oracle XML Database
  VALID                                        11.2.0.2.0
  
  
  1 row selected.
  
  SYSTEM@scidev> show parameter dispatchers
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  dispatchers                          string      (PROTOCOL=TCP) (SERVICE=scidev
                                                   XDB)
  max_dispatchers                      integer     NULL
  SYSTEM@scidev>
  
  SYSTEM@scidev> select dbms_xdb.gethttpport from dual;
  
      GETHTTPPORT
  ---------------
             8089
  
  1 row selected.
  
    1* SELECT DBMS_XDB.getaclDocument('/home/').getClobVal() FROM DUAL
  SYSTEM@scidev> /
  <acl description="Public:All privileges to PUBLIC" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl
  .xsd                           http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
    <ace>
      <grant>true</grant>
      <principal>PUBLIC</principal>
      <privilege>
        <all/>
      </privilege>
    </ace>
  </acl>
  
  
  1 row selected.
  
  SYSTEM@scidev> 
    1* SELECT DBMS_XDB.getaclDocument('/home/pharma').getClobVal() FROM DUAL
  SYSTEM@scidev> /
  <acl description="Private:All privileges to OWNER only and not accessible to others" xmlns="http://xmlns.oracle.com/xdb/acl.xsd" xmlns:dav="DAV:" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
  xsi:schemaLocation="http://xmlns.oracle.com/xdb/acl.xsd                           http://xmlns.oracle.com/xdb/acl.xsd" shared="true">
    <ace>
      <grant>true</grant>
      <principal>dav:owner</principal>
      <privilege>
        <all/>
      </privilege>
    </ace>
  </acl>
  
  
  1 row selected.

  Status of the listener follows

  D:\oracle>lsnrctl status
  
  LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Production on 02-MAR-2011 12:40:57
  
  Copyright (c) 1991, 2010, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Production
  Start Date                21-FEB-2011 22:58:56
  Uptime                    8 days 13 hr. 42 min. 2 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   D:\oracle\path\network\admin\listener.ora
  Listener Log File         D:\oracle\path\listener\alert\log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC0ipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8089))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=2102))(Presentation=FTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=8080))(Presentation=HTTP)(Session=RAW))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=2100))(Presentation=FTP)(Session=RAW))
  Services Summary...
  Service "DEVXDB.aa.ad.epa.gov" has 1 instance(s).
    Instance "dev", status READY, has 1 handler(s) for this service...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "dev" has 1 instance(s).
    Instance "dev", status UNKNOWN, has 1 handler(s) for this service...
  Service "dev.aa.ad.epa.gov" has 1 instance(s).
    Instance "dev", status READY, has 1 handler(s) for this service...
  Service "scidev.aa.ad.epa.gov" has 1 instance(s).
    Instance "scidev", status READY, has 1 handler(s) for this service...
  Service "scidevXDB.aa.ad.epa.gov" has 1 instance(s).
    Instance "scidev", status READY, has 1 handler(s) for this service...
  The command completed successfully
  
  D:\oracle>

  Http and ftp to SCIDEV ports are resolved in Enterprise Manager at 8089 and 2102.
  
  FTP log follows. First connect you to DEV successfully. Then connect you to SCIDEV fails.

  WINSOCK.DLL: WinSock 2.0
  WS_FTP95 LE 4.60 98.03.17, Copyright © 1992-1998 Ipswitch, Inc.
  local chdir to c:
  - -
  connecting to localhost:2100
  Connected to localhost port 2100
  220- servername
  Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
  220 servername FTP Server (Oracle XML DB/Oracle Database) ready.
  USER xdb
  331 pass required for XDB
  PASS (hidden)
  230 XDB logged in
  PWD
  257 "/" is current directory.
  Host type (I): UNIX (standard)
  PORT theIPaddress,15,15
  200 PORT Command successful
  LIST 
  150 ASCII Data Connection
  Received 250 bytes in 0.1 secs, (20.00 Kbps), transfer succeeded
  226 ASCII Transfer Complete
  QUIT
  221 QUIT Goodbye.
  local chdir to c:
  - -
  connecting to localhost:2102
  Connected to localhost port 2102
  220- servername
  Unauthorised use of this FTP server is prohibited and may be subject to civil and criminal prosecution.
  220 servername FTP Server (Oracle XML DB/Oracle Database) ready.
  USER xdb
  331 pass required for XDB
  PASS (hidden)
  530 login error
  ! Logon failure, so quitting

  But I can log in with the same user in sql plus

  SYSTEM@scidev> connect xdb@scidev
  Enter password: ***********************
  Connected.
  XDB@scidev> select user, sysdate from dual;
  
  USER                           SYSDATE
  ------------------------------ ---------
  XDB                            02-MAR-11
  
  1 row selected.
  
  XDB@scidev> 

  This is starting to look like bug 6049194. Please open an S/R with Support of Oracle

• Authentication http post VI errors

  I am trying to query a web service to third parties non-LabVIEW LabVIEW 2014, using HTTP POST. Using another utility (restclient-ui-3.5-jar-with-dependencies.jar), I checked that URL, user name, password, and query syntax are accurate and are running on the same computer where my VI fails. I must be missing something when translating that to LV, because I get the error 401 (full authentication is required) and also 415 (unsupported media type).

  I have attached the configuration file used for the other utility, my VI and an overview of the response from the Web service for the post of the VI.  I had to make all anonymous, hide url, user, etc., so it can not really be tested as it is, unfortunately. I tried with & without additional authentication header, with & without Config SSL, etc. You can see the different options on the VI.

  Any suggestions?

  Thank you very much.

  Solved my problem with a combination of different required headers and syntax fixes.

• Google Chrome is showing HTTP 500 Server error

  MY GOOGLE CHROME SHOWS SERVER HTTP 500 ERROR. How do I FREE THIS DIFFICULTY.

  Hello SusanWO,

  Since there is a mistake in Google Chrome, you must contact Support to Chrome.
  Click on here for a link to Google Chrome Support.

  Thank you

  Marilyn