Huge problem with the system on my laptop Acer s7-391 acer recovery disk

Similar Questions

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• HP officejet 4620 there is a problem with the system printer or ink 1000008 0x6

  PTR does not print page alighn.  keep saying "there is a problem with the printer or ink system 0 x 6 1000008' I turned market several times."  I unplugged.  I remove and reinsert the ink cartridges. I removed and reinserted the paper AND

  I always get the same message!

  This article should help to resolve the error you get:
  http://support.HP.com/us-en/document/c03081973

  Try the steps and tell us if it helps.

  Good luck!

• Problem with the systems

  Hi, I have a Hp pavillion dv 6426us, recently sometimes it freezes, and I have to turn off manually. I use firefox and it oftens gel too (not), it happens every time I use it for a few seconds or more, I have tried to reinstalled firefox and it still does this. even other programs like anti - virus, yahoo Messenger, nearly every program I use will do (no response) for a few seconds before it works. So I think I have a problem with the computer, what do I do to fix this? Thank you

  I backup your personal data and restore the system to factory condition. This will clear up all software problems.

• I have problems with the trackpad on my laptop Pavilion g6 (2012).

  I repeated my mouse HP remotely when you use this computer because I always found difficult to use trackpad. On the use of the touchpad, he sometimes goes out of control with the scaling and scrolling text selection. I checked the driver to find she had the latest recommended driver. I walked into its configuration in the control panel with the intention to disable but can find no choice. I need two points of orientation:

  1. are there clear instructions on how to use it? (still not found)

  2. How can I disable it if the first is not successful?

  Thank you for your attention in this matter.

  Hello

  Find your product on a laptop number:
  http://support.HP.com/us-en/document/c00033108

  Find your operating system:
  http://Windows.Microsoft.com/en-CA/Windows/which-operating-system

  In some models,.
  On your TouchPad, you will see a light in the upper left corner of your keyboard. The light is usually orange. If it is on, this means that the TouchPad has been disabled.
  If you look to the top left of your trackpad, there is a dash of small circle.
  Press twice on the circle to lock/unlock your trackpad.

  Below you will find a link on the troubleshooting of the TouchPad. Click on "Disable TouchPad" and see if it still register as disabled.
  It is specific to Windows 8:
  Use and troubleshoot the TouchPad-
  http://support.HP.com/us-en/document/c03523373

  If this does not work, use the link below. It is similar to the link I put in my post above, but it's for Windows 7:
  Use and configure the TouchPad Windows 7-
  http://support.HP.com/us-en/document/c01876141

  Kind regards

  Visruth

• problem with the system restore when you try to back up disks

  my system crashed.  would not boot.  Several attempts later, went to the system recovery... do you have a full upward (23 dvd) then did a complete restore.  laptop works.  However restore my files from the backup disks does not work.  I get a failure in the system restore somewhere in the treatment of the disc 12 (out of 23).  Help!  sighing heavily... of course this happens when I am in a time crunch

  Hello cyberterp. I see that you are having problems to restore your data from backup disks. To make sure that I understand you were able to make the recovery of the operating system, but the data you have saved in the course of the process you're trying to get now?

  Check the bottom of the twelve disc and make sure that there are no scratches on it. If there is even the smallest scratch to find a local store that will shine the disc for you; This can allow you to read the data. If discs are in perfect condition and then either media are bad or there was a problem (unnoticed) during the backup process and it is unlikely that you will be able to recover the data.

• Problem with the Gateway using Vista laptop battery

  Hi all

  I've had this laptop Gateway for a year now and I have had this strange problem with it probably a good 3 months to own. Basically the little thing of battery indicator on the bottom right of the task bar will say "plugged in, not charging" while the laptop is plugged. So this is my little ghetto rig which leads me to believe that is not the battery or the charger which gives me the trouble.

  While the laptop is plugged in, and moan about there is no life left blah blah, I pop the battery and back in. Hop, I magically have full battery and be able to unplug the laptop for mobile use.

  I've read a lot online that it is a Vista problem, that I am running, and not a hardware problem. I would really like to know if this is true, because I am a student and prefer not spend the precious material fixing money when this is not the problem. As stated earlier, cell phone charges when it is plugged in, it SAID only that it does not load. When I pop the battery, it works fine until the next time that the battery is exhausted and then I plug it in and have to redo the same platform of ghetto.

  It's just a little a downside to keep popping up that darn battery in and out, and frankly, I don't think it's good for the laptop to keep doing this, even if it's worked for me for about 7-8 months now.

  Can someone please offer information about this weird issue?

  Thank you very much.

  Why my battery portable MD Gateway or Gateway MC series doesn't load at 100%?
  http://gateway-us.custhelp.com/app/answers/detail/A_ID/2624/kW/battery%20not%20charging/session/L3NpZC9UKjJBcnNsaw%3D%3D

  Also in this forum:
  Gateway Laptop: plugged in, does not support
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/6db4fe50-D318-44DA-a938-2fc58f4bbe7b
  on one of the post of Leaky.

  I hope I could help

• Problem with the system icons in the tray in Vista

  some of the icons in the system notification area are often turns off when I start the laptop... and they will be visible only after the start-up of the unit again and by checking the respective boxes in the properties...

  * original title - on the icons in the tray... System *.

  Check out the procedure described in the following link to see if it solves your problem:http://support.microsoft.com/kb/945011.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with the system restore

  Try to restore system using System Restore.  getting the error "system restore was not entirely successful.  The system files and settings on your computer did not change.  Details: An unspecified error occurred during system restore.

  Have tried several times and get the same result.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the system SupportAssist credentials

  I created a specific service for SupportAssist account called restrictions that I would use for the credentials of the system.  The account is a local administrator on the server as well as a part of all of the available of OME groups. I checked that I could log in to the OME site with this account.

  However, when I try to set these credentials as the credentials of the SupportAssist system, I get the following error.

  Unable to connect to OpenManage Essentials
  SupportAssist cannot connect to OpenManage Essentials. Please provide the credentials of a user account that belongs to one of the following groups:
  

  • Directors of OME< i="">
  • OME power users
  • OME Site administrators

  I uninstalled and repaired the OME and SupportAssist so that to restart the services, etc.  I have also confirmed that the other account identifying information work, including my own OME, access credentials. Any ideas on what's going on?

  Thank you!

  Thanks for sharing of screenshots and other information related to this issue.

  Here are the correct steps in Add a service account domain for system identification information in SupportAssist:

  1. prior to any change in SupportAssist, add the service account to the users on the management server running SupportAssist.

  • Server-> Configuration management-> the local users and groups-> users

  2. Add the service account to the Administrators group.

  3. then open the SupportAssist console and go to the settings tab and click on systems of credentials.

  • Update the credentials, and then click on save changes.

  4. If there are no errors, the changes will be saved successfully.

  Note: If there was a previous attempt by adding a specific account without first including in the Administrators group, then this account will not be usable without some significant changes. If another account can be used for systems of credentials, please follow the steps above to add this account. Otherwise, we recommend that you submit a ticket and works with the technical support of SupportAssist to solve the problem.

• Huge problem with the graphics card. Help me pls!

  Unfortunately my pc is not guaranteed, so my last hope is here on the forum.

  I have Dell Inspiron 580

  

  Ok.So the problem was that I found myself not being able to open My Nvidia Control Panel to verify customization as one of my games was so bad. That's why I found that my disappeared from Nvidia and Intel HD Core i3 graphics took place.

  

  And yes my pc used to run with Nvidia I have proof: P

  

  I must say that for me (as a heavy gamer) was a great kick as Intel uses all my CPU and my games become so difficult to play.

  I have tried everything that I could to restore the return of Nvidia (except one: to reinstall windows) but not one chance :(

  Reinstalling the drivers did not help actually I don't even know the type of driver that I need because that Nvidia is not found.

  Any advice? It will go to normal if I reinstall windows?

  Thanks guys and sorry for my bad English :D

  Hi Georgina26,

  You use the graphics card onboard because your monitor is connected to the video port badly. Turn off the system, unplug the video cable and connect it to the video card into the PCIe slot.

  If you are not familiar with the snap of a monitor on the back of your computer, please let me know and I will give a link to some photos.

• huge problems with the chronology of rendering

  Hi all

  This is my first post here in the forum. I hope you can help me.

  I use Premiere Pro CS6, and I have enormous problems making the timeline. Almost every time that I have to do this, the first freezes / crashes on me. The workaround I found must just make small portions at a time, but it's really a lot of time and even that doesn't help sometimes. Is this a common problem? Does anyone knows how to fix this?

  My project has 2 joint k on a 24 fps timeline. I have also some elements of framing/split screen with alpha channels that is supposed to go to the top of the sequence.

  I know that the first is supposed to be able to work with different formats of files natively, but there are some formats that it reads and treats much better than others? AVI, quicktime?

  My system is windows 7, 12 GB RAM, nvidia quadro 1800 graphics card (it's probably too week to be used in the mercury engine, but made software normal should still work).

  It's really frustrating me, so I hope that some of you out there would be kind enough to help out me. Any help is appreciated.

  Thank you

  Doug

  Thanks for your replies guys.

  With regard to the drive HARD; I'm currently 282 GB of free space on the disk that my project is on. I thought that that should be enough. The project is a short, so I'm not endless hours, sequences. HARD drive format is NTSF 7200 RPM. I know that this is not the fastest thing in the world, but I don't think I should need a raid for something like that.

  What frame rates? The chronology should be 24 fps, because the project will be on the fads in the end. But I have a lot of images that was shot on a Canon 60 d, with 23.976 fps. And then I have other things rendered off Nuke as sequences of image with 24 images per second. This could cause problems like mine?

  Thank you

  Doug

• problem with the pavilion dm4 3002 laptop drivers its

  I have a 32 bit win os 8 and my wifi and bluetooth drivers do not work help me

  Hello

  Here is your driver download site: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4131&lc=en&cc=uk&dlc=en&sw_lang=&product=5254481#N151

  have you tried updating your drivers on the above page?
  go to Device Manager, try to uninstall adapter Bluetooth & wlan network adapter in the list.
  Restart the system.

  Download latest on the link above, it will be there in the list 'driver-network '. Check good and the recent verification of dates, they are released. Save it to a known location on your computer, install everything at the end.
  Restart the system.

  hope that solves your problem. keep posted.

  Thank you

• BlackBerry Smartphones having HUGE problem with the screen

  Please help me people... My flipberry went completely crazy...
  I ' l try to explain the problem with as much detail as I can remember...
  Since last week or both internal as external screen my phone acted crazy...
  for the start of a few days, the problem started with the internal display will red sometimes, or show the half of the screen with stripes of colors... I thought it was a passing phase...
  but after a few days, the screen went completely black... both screens external and internal... until this time, as I ran the firmware 4.6.0.222
  so that day I sat down and wiped my phone completely and loaded the latest firmware 4.6.0.236... in order to completely black screens are returned to the way they were... sometimes ok, sometimes showing abstract things and weird colors...

  and even today both screens went completely black... so I'm currently trying to get back to the 4.6.0.180 version as recommended by t-mobile...

  and I have not dropped my phone once again since I bought it 4 months ago... need help

  usually the phone will come with a free warranty of one year.  The best thing I can suggest is to return to the top of any data you left phone and bring it back for a replacement or sent it to be repaired because it seems to me that your phone is defective.