Hush the module does not work on new versions (the 39.0.3 following) of Firefox. You fix you?

Similar Questions

• The Magentic program does not work with newer versions of windows

  Original title: Programas compatibility application applications app applications Juego Juegos Heredado USO caudal Cuelgue Cuelgues

  The Magentic program does not work with newer versions of windows

  Hello danielbrauer,

  The magnetic site says the requirements are for Windows XP or higher. However, it is not on the Windows Vista or the Windows 7 Compatibility Center.

  You can try the following to see if it will help with compatibility. If the program is not compatible, then you try to install and run the program in compatibility mode.
  Use the following steps:
  (1) right click on the program
  2) click Properties
  3) click on the Compatibility tab
  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If this does not help, you can contact the magnet to see if they have an updated version.

  Sincerely,

  Marilyn

• Application written with JavaScript does not work in newer versions of Firefox

  I am unable to upgrade past Firefox 3.6 as a request that we use doesn't seem to work properly all any more recent version. The application of Service Manager and is based on JavaScript. The pages display correctly, but none of the links in the pages seem to be working. When I click on a link, nothing happens. I tried to reboot in safe mode and reset the profile, but none who helped everything. Is - that balance I need to change?

  That would explain it. It doesn't seem to work properly in Internet Explorer, so I guess I can use it for my service desk tickets and continue to use Firefox for everything else.

     Thanks for your help.
  

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  Why the button "Save as" does not work in new Acrobat Reader? Very annoying...

  I have already updated to the last DC v15.009.20077...

  So I found a way, if I do it just right, it works (with the file, click the "tiny" file and then save as. I made the mistake of first pressing the home much more first. Really not intuitive or easy to use even if... Looks like you have replaced the button "save under" with the "save in the cloud." We use mettle at work, and the cloud of Adobe is irrelevant for me...

• If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

  FastCore-Routinen-Modul could not be loaded because the tools does not work with this version of Photoshop.

  The MMXCore Routinen module could not be loaded because the tool does not work with this version of Photoshop.

  The Mehrprozessorunterstutzungs module could not be loaded because the tool does not work with this version of Photoshop.

  Hi zimlo,

  Please check the below link which may help you:

  https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Sarika

• Toshiba common modules does not work properly

  Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

  Anyone know what this means?
  I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
  Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

  I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
  Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

  Please let us know if everything works well again.

• I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  I have 12 items but camera raw does not work with New York nikon d810 does support elements 14 raw d810 nikon camera

  bavarian1 wrote:

  I'm sure that my computer is up to the task, but I don't always have the answer No 14 elements camera raw support the d810 nikon?

  John

  I told you in my first post "in short, PSE14 may", Yes, the PSE13 and 14 support Nikon D810.

• My Slideshow module does not work.

  The slideshow module does not work. It stays on a black screen, or return with a module error. Help me!

  Hi donaldwoodruff,

  Please turn off the graphics processor in the Lightroom preferences.

  Open Lightroom

  Go to Lightroom preferences in the Edit menu

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Let us know if that helps.

  Kind regards

  ~ Mohit

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Develop Module does not work. I have the membership, but it says that I don't have

  I pay 9.99 per month and suddenly Adobe says that I can not use the develop Module. If they don't get the job, they will not be able to use my debit Module

  Hello

  Please see Module development does not work after last update 5.5

  Hope that helps!

  Kind regards

  Sheena

• L10-202: ACPI Module does not work with Linux SUSE 10

  I bought a Toshiba laptop L10-202 a few weeks ago and tried to install SUSE 10 on it. The installation went well but I have some problems with ACPI modules.
  I know that Toshiba recommends Windows XP but I have nowhere to ask for help because I could not find help on Linux forums. I should mention that I've recompiled the kernel because I considered that this was not necessarily.
  So far, the modules ACPI informs me on the temperature of the processor (57 degrees Celsius, the fan starts and at 52 degrees Celsius, it stops) and the only function that works is suspension on HARD drive. The battery level is not indicated because there is no file in/proc/acpi/battery/to read information on the battery. Except another ACPI hardware was detected by SUSE installation and works very well. I couldn't use the Toshiba_acpi module because this laptop has a Phoenix BIOS, but this isn't a big problem.

  You have an idea why ACPI does not work on SUSE and how could I solve the problem?

  Don't you think that there is no danger for the laptop to continue using SUSE, which limited the work of ACPI modules could cause damage to my laptop or it is safe to use SUSE?

  Thank you!

  Hello

  Well well, in my own opinion it s desirable that all functions of the laptop should work properly. But I put t think he might of s for laptop computer continue to use the Suse10.
  I would recommend using the other Linux distribution. That use you the Knoppix. This Linux you can stat from a CD or DVD and it works like a normal Linux operating system and you can also use the Windows XP.

  Little info on ACPI:
  With ACPI, the operating system can turn off devices, such as CD-ROM drives, when they are not in use. Another example: ACPI will enable manufacturers to produce computers that automatically turns on as soon as you touch the keyboard

  Good bye

• In 2012 LabVIEW MathScript RT module does not work

  Hi all

  I recently installed LabVIEW 2012 in my PC with Windows 7. However, Mathscript does not at all. It says "an internal error has occurred in the MathScript RT Module.  Restart LabVIEW and try again.  If the error persists, reinstall the MathScript RT Module. "I did it, but still does not work. It is said further than Mathscript is missing or not installed", but I have installed. What the problem would be, please?

  Have you been able to verify the installation and activation in the License Manager OR? It should say enabled for this computer and have a green square like this: