Hyperlinks does not when you publish the Web site.

Similar Questions

• CTRL and alt does not when you select the picture to join

  I'm not very techno and hope someone can help me find an answer... when trying to select multiple photos to attach to the e-mail, I used to use the CTRL and ALT keys to select several photos.  This does not work for me now.  Are there settings that I can change to get this working again?

  ALT? Are you sure? CTRL + click (for the selection of random photos)
  or shift-click (to select an entire group) works for me.

• Motion/opacity (yet) does not when you use the time remapping effect

  OK: Here's my meat. This bug has been around for CS3 and CS4. I was hoping this would be fixed with the arrival of CS5, but apparently it still has not been resolved.

  If you use the time remapping effect in the body, you can not use the other features of keyframing, such as movement or opacity. If you do, the video simply disappears. Rendering will not help either. The only way to get the opacity of the function is to overlay a video black bar on the top of the element (or any other cache of color if you like fantasy) and have the opacity on this clip in reverse work. How to get movement in these clips remapped time to work is still somewhat a mystery to me...

  Has anyone found this tedious, boring/irritating?

  So, when can dear Adobe, we expect a fix for this? If all goes well before CS6.

  Thank you very much.

  Richard

  Yes, it's a real annoying bug.
  Simple around - after work you time-remapping your clips, nest (control-click on the clip and select 'nest'), then you can change the opacity normally.

• Why erase history browse (all) does not erase most of the web sites, but not all?

  Using Windows 7, when I erase all history there are sites that are not affected and remain behind. How indeed erase EVERYTHING? Thanks for your reply.

  Problems with bookmarks and history does not properly can be caused by a corrupted database places.sqlite file.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

• I have 11 on mac elements. Clone Stamp does not, when you click the command to clone I get the tool move?

  I have 11 on mac elements. When I click on the sample order get the move tool and no cloning happens?

  Option (Alt on windows OS) key is what you press and hold the key and then click on the image to define the sample (source of duplication) for duplication tool and Healing Brush tool.

• Firefox does not when you watch the video

  Whenever I am watching the video on youtube or any other site, the browser stops responding. every thing is blocked and I have to go to Task Manager to stop firefox.
  After that the firefox browser refuses to start until I restart my computer.

  You are welcome.

  Could you please click the button "solved it" to take your post out of the loop?

  Thank you.

• iMac does not have access to the Web site properly

  It is the strangest problem ever... I had my site over the years...

  When I go to my website www.mariahmilan.com it looks like my site, but it contained old on it. If I access from my phone or other computers in the House, this is my site with updated content.

  It's almost as if my Mac has created a site duplicate offline and I can't post something new on my blog/site, because it will not show on my personal computer. I am quite at a loss here.

  If you use Safari-

  ⌘ + -> advanced-> check show develop Menu

  Develop - clear the cache

  Quit Safari

  Re, open it and try to log on to the site again

• When I publish my Web site, the home page shows something different from what I see on my preview in Dreamweaver...

  When I publish my Web site, the home page shows something different from what I see in the Preview on Dreamweaver...

  Looks like you are out of your .css style sheet in your code.

  http://www.mckellhaggard.com/website/website2/style.CSS returns 404 not found.

  best,

  Shocker

• I just upgraded to Firefox 5.0.1 and because the "padlock" icon never appears when you access secure Web sites, where should I look for it?

  I recently upgraded to Firefox 5.0.1 and now the 'lock' icon is nowhere (I don't know) when you access secure Web sites. I've not seen once. It appeared in the lower right of the screen. I also have Norton Internet Security.

  Well, in the secure Web sites part of the address bar is allocated to the part of the security certificate. For example, here in these forums you can see your address bar is as follows: mozilla.com . https://support.mozilla.com... The front ' |' ("mozilla.com") is what I'm talking about. For more information on the security certificate, you can mouse over and also clicking on it.

  Press "Resolved" If this has helped you.

• I remain unplugged for a long period of receipt message that dns does not when you use windows 7

  I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN

  Concerning

  NAWAB IKRAMULLAH KHAN

  Hello

  ·          When the issue started?

  Method 1:

  Run the Windows 7 network troubleshooting and check if it can automatically find the fault.

  For more information about how to run the network troubleshooter, check this link:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Get the network store event of Event Viewer logs.

  Check out this link on the event logs of the resolution of network problems.

  http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problems

  Method 2:

  a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.

  b. at the command prompt, type the following command and press ENTER:

  ipconfig/flushdns (there is a space between ipconfig and /)

  It will show you the message successfully empty the cache of DNS resolution.

  c. at the command prompt, type the following command and press ENTER:

  ipconfig/registerdns (there is a space between ipconfig and /)

  d. at the command prompt, type the following command and press ENTER:

  ipconfig/all (there is a space between ipconfig and /)

  e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.

  g. If this is the case, try this:

  ·          enough ipconfig at the command prompt and press ENTER.

  ·          ipconfig / renew in the command prompt and press ENTER.

  h. test it again by typing ipconfig/all to see what is the address?  (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

• Windows freeze/thaw when you surf the web

  Hello world

  I had a problem with my PC for some time now and it is really really annoying me.

  When you browse the web with Chrome or Firefox, it freezes for a few seconds (up to 10 at least) constantly then thaws again. If I watch a YouTube video, the picture often freezes for a few seconds but sound keeps going, then it goes back to normal.

  I can play games in 3D without any freezing point, I can use Office and other applications without any problem, it's just web browsing. I tested Internet Explorer as well, but only for a short period and so far have not been able to replicate.

  Initially, I thought it was a problem with Adobe Flash Player, so I uninstalled, rebooted and reinstalled. No change. I can often be on the pages of plain text with no Flash animation and still freezes when entering the URL or scroll to the bottom of the page. I use the HTML5 in Chrome for YouTube Player, so can not see how it can be Flash Player causing the gel.

  Below are the specs of my PC:

  Bicoeur AMD CPU (3.2 Ghz)

  16 GB of DDR3 memory

  Brand new Samsung Evo 120 GB SSD (my old Corsair died)

  1 x WD 500 GB HDD

  512MB Nvidia GeForce 9600GT (old, I know)

  Card mother Gigabyte, with the latest version of the BIOS

  DVD burner

  500W PSU

  I already re-installed a completely new copy of Windows 8 on my new SSD when the old man died, but the problem persists.

  I tried to unplug the DVD drive and the 500 GB HDD to rule them out, but it made no difference.

  I think out my video card and the transition to the car as a test video, but I don't know if this will help.

  The PC was built by myself about 3 years ago, but I'm a little out of ideas as to what could be the cause of this trouble on my PC at home.

  Anyone else have any suggestions? Could it be faulty memory?

  Looks like I solved this myself.

  When to remove my graphics card and turn on/off the PC, I got 3 beeps and no BIOS screen. I looked in my manual of the motherboard and it says error memory, so I removed and re-sitting all of my RAM.

  Tested the PC with only the embedded video, could not fault, so put my old 9600GT back in and everything works fine.

  Before I did this, I booted up a Linux Live USB distro, and I could reproduce the exact same gel I was getting in Windows, so I knew it must be a hardware problem.

  I'll run memtest86 later and make sure that my memory is not faulty.

• Firefox does not trust, a particular secure Web site I know is course trust but other secure Web sites

  Firefox does not trust, a specific secure Web site I know is safe, but there is no trust other Web sites secure. In addition, Internet Explorer trusted this website and Firefox on another computer trusts of the same site. When I try to connect Firefox tells me it doesn't have a valid certificate (even though I know there is one) and I have to make an exception for you connect. Is it possible that I can fix this and get the appropriate in this particular program of Firefox certificate?

  Be sure to select "All Files" and not "text files" type when you save the file in Notepad (text files add a hidden .txt file extension).

• FF8 + dialog box popup "application/vnd.wap.xhtml+xml" when you access a Web site.

  FF8 cannot use the www.translink.com.au trip planner.

  When I fill in the fields and click on 'Find journey' - a dialog box appears

  "You have chosen to open the trip planner.
  which comes from application/vnd.wap.xhtml+xml a: (27.6 KB): http://jp.translink.com.au
  What should Firefox do with this file?
  Opened with Browse...
  Save the file.

  Also a few other buttons on this site do the same thing, for example. On this page and train travel planner:
  http://TransLink.com.au/travel-information/services-and-timetables/buses/Route-204
  -If you click on the button 'Show time' - it does the same thing.

  This site worked before ok with FF7 and IE8.
  A release with the troubleshooter from the site Web - no response.
  Now it is unusable and don't know what to do.

  Other than this problem only seem to work ok - FF8 so this Web site is to blame?

  Googled the problems forums and looked for a solution - it's a problem similar to mine:
  http://support.Mozilla.com/en-us/questions/796303?s=application%2Fvnd.WAP.XHTML%2Bxml & r = 1 & s = ACE

  PS - to confirm - I use a desktop pc with a mobile broadband usb dongle.

  I hope someone can help.
  Thanks in advance.

  "FF8 + dialog box popup"application/vnd.wap.xhtml+xml"when you access a Web site."

  THE PROBLEM ABOVE IS NOW COMPLETELY RESOLVED.

  The site in question was the problem - NOT 8 Firefox or Linux Mint.

  The site has been fixed and now works as it should.

  If someone else gets a dialog box pop-up similar box to the above - suggest that they contact the administrator of the website the problem and inform them that their site user agent detection Web is not correctly identify your version of Firefox mobile browser and so redirecting to a mobile version, return of mobile specific markup (Content-Type).

  Check the Whirlpool forum: http://forums.whirlpool.net.au/forum-replies.cfm?t=1821427

  and here for a similar problem: http://support.mozilla.com/en-US/questions/796303#answer-158925

  As mentioned above, for the temporary site issue features while it is currently set, install the extension switch from User agent.

  https://addons.mozilla.org/en-US/firefox/addon/user-agent-switcher/
  

• Mail does not when you try to delete the message attach a file on new message

  I bought my wife a new MacBook, retina 12 "early 2015, 1.3 GHz Intel Core M, 8 GB 1600 MHz DDR3, running OS X El Capitan 10.11.3 with his old Mac, she would frequently get the ball from spinning to death when she tried to delete an e-mail message, and also when she creates a new message and tried to attach a file.  I was hoping that the new computer would solve this problem.  However, he still does sometimes, but not as often and does not have as much time to finally react.  Activity monitor says that the Mail does not respond when the small wheel is happening.  Looks like there is a corrupted somewhere file that got transferred to the new computer.  Any suggestions on how to solve it?  Previous posts suggested to remove the tray to sand, but the method, that said, does not have the folder that I had to remove.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Transparent button to URL link does not when I publish

  I use mulitple tranparent buttons (plus text) as a link to open a URL in a window on our company intranet.  I created this file 6 months ago and it still works fine.  Today, I had to update the file and add a transparent button to post a link to a new url.  When I saw the file, everything works well and a browser window will open displaying the correct web page but when I publish the file, nothing happens.  None of the links work.

  I've updated this file in the past and I've never had a problem.  Does anyone have any suggestions.  This should be an update of two minutes for me but has turned into a big problem.

  Thank you

  Jeff

  Hi Jeff

  What you might consider doing is to declare a common output folder. Then the flag this file as safe. Normally it is an and it is just. But you have the option to clear the list of records that are "safe". Maybe something that undermined at a time given.

  In addition, once you copy the content to a web server and display it in the browser using a URL, you should not have any concerns. The link should work for all users.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks