HyperMemory on Satellite Pro L870 - 18G

Similar Questions

• Touchpad does not work on my Satellite Pro L870 - 18G

  My touchpad suddenly stopped working. I had the laptop on the way "sleep" for a few hours and when I came back the touchpad did not work... The touchpad has a habbit of deaktivating itself for no reason, but now it is enabled and does not. Very annoying!

  I tried to download the driver again to reinstall it, but it is not listed in the section driver for my laptop?

  Any ideas?

  Touchpad (mouse) registered and installed correctly in Device Manager?
  Touchpad may be disabled? Make sure that the touchpad is enabled correctly.

  By the way: what model of laptop and operating system are you using?

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• Satellite Pro L870-15F and missing compatibility Windows 10

  Hello

  I have a portable Satellite Pro L870-15E.

  I saw in a compatibility list, that I was sent via Tempra that my laptop is not compatible-10 victory.

  How is it that a laptop that isn't so old or so cheap does not have to be compatible with Windows 10?

  Concerning
  ARI

  How is it that a laptop that isn't so old or so cheap does not have to be compatible with Windows 10?

  I guess that in this forum from a user to anyone will be able to answer this question, but from my point of view of a few each notebook / computer manufacturer must decide which models would get additional software support...
  Toshiba released still many laptop models in a short period of time, and in my opinion that it is not easy to provide support for all series laptop... so somewhere it is necessary to make a clear cut...

  But you can still install Windows 10 laptop and I am sure that the system will work perfectly, but probably some portable devices is not available due to lack of software...

• Satellite Pro L870-18R - no boot after upgrade CPU

  Hello

  Bought the "SATELLITE PRO L870-18R" alongside a "Intel Core i7-3740QM 2.70 GHz FCPGA988 L3 6 MB 4 Cores CPU 2.70 GHz" to upgrade the processor and get a beautiful machine.

  Boots of machine as expected with its stock i3, but white LED will blink once and no post when upgrading the processor is applied.
  Is their a bios that will support this CPU, otherwise what is the max processor that toshiba will move to. Little bit discouraged, I can't upgrade.

  Is their a bios that will support this CPU

  BIOS updates are not released to allow new media of CPU, but the BIOS updates are released to fix possible problems for laptop...

  If this is not the case, what is the max processor that toshiba will move to. Little bit discouraged, I can't upgrade.

  Still is it that manufacturers of mobile phones do not support updates on own laptops... This means that there is no further information on the possible processors and supported.

  However, a new processor usually requires a BIOS and chipsets support... so in case you want to make these updates (of course only at your own risk) then you will need to use a CPU that is supported by the Intel Chipset. But there is no guarantee that this notebook would functions even if you use a processor that would be supported by the chipset...

• Satellite Pro L870 don't stay on the Toshiba logo forever - no start

  Hi all

  Does anyone know of a problem that could cause a no boot (a few stays on Toshiba logo forever) followed by starting on the second try almost every time on a Toshiba Satellite Pro L870 (Windows 8)?

  Thanks in advance

  The laptop usually performs the POST (power on self-test) while the Toshiba splash screen is visible.
  In power in the self-test, the essential components card mother (i.e. RAM) is enabled.

  I think the POST should not be spent properly and so the laptop hangs at the Toshiba logo screen.

  But unfortunately, I can't say with certainty what part could be affected it could be a RAM problem or a motherboard problem.

• Satellite Pro L870-172 error 003 when retrieving the recovery DVDs

  Hi all

  Having a devil of a time with this portable darn. So I bought the recovery dvd. tried to boot from the disk and comes with no OS bootable. Thinking it could be a problem with the optical drive, I created a bootable usb key.

  Received the usb key to start

  So I goto Toshiba Recovery Wizard
  Press Yes to say it will wipe the drive.
  Retrieves the software factory default
  In the end, I get an error message

  Error: 003
  Recovery error

  Press ok to start the computer

  You can see the final screen here.
  https://DL.dropboxusercontent.com/s/1fq5yk4t9hjhmk9/2014-09-05%20at%2012.38.PNG?DL=0

  Can anyone help plleeaaaseeee.

  The only thing I can think is that maybe when I created the USB startup key should I copy then disk2 on the stick as well using xcopy.

  I think there are several reasons for the error.
  The recovery media or the hard drive is may be defective. Wrong settings of the BIOS, etc...

  I recommend you to check once more the Toshiba Recovery bootable disc.
  I don t think that there might be a problem with the optical disc drive.
  From my point of view, it could be a bad BIOS setting.

  The Satellite Pro L870-172 has been pre-installed with the system Win 8.
  Please check start secure as well as the UEFI boot mode option in the BIOS.

  Generally, in order to be able to boot from different devices to boot, secure boot must be disabled.

• On Satellite Pro L870-173 keyboard problem

  Hi, I am the owner of a laptop from the Satellite Pro L870-173.
  By writing an e-mail the keyboard functions has changed.
  Some keys have a different meaning, examples

  Space lab = o
  4 = o v4v4
  c = the optioo for a secodon display

  What can I do?
  Is originally a default keyboard?
  Do anyone have an idea?

  The system is a 6v4 - bit win8o
  The keyboard settings is always the same: German language

  Thank you very much!

  > Do someone has an idea?
  Yes, I have an idea.

  > Is originally a default keyboard?
  I m afraid, Yes.

  You can confirm my idea connection external USB keyboard to the laptop.
  In case your external keyboard would work correctly, the problem is definitely related to the internal keyboard.

• Satellite Pro L870 - 17 X and 2 hard drives

  Is it possible to install 2 HDD SATELLITE PRO L870-17 x?

  If there is second location of HARD drive with SATA connector, it should be possible.
  Have you checked it already?

• 'Lost' on Satellite Pro L870 webcam

  I bought a SatellitePro L870-171, with factory pre-installed Win 8 64 bit laptop for Christmas gift from my wife.

  Taking advantage of the opportunity to get familiar with the functions and utilities, I found the web camera integrated a few days ago, which produced a self-portrait on the screen! More recently, I tried to find the way to access the camera again as my wife will want to try "Skype".

  I can't locate or obtain a new screen image - no doubt I have pressed the wrong button screen at any given time have disconnected?

  The camera is a USB device. I checked with + Control Panel/Device Manager/imaging devices + and the camera is shown as working properly with his driver as "TOSHIBA Web Camera - HD" - there is no yellow exclamation of warning icon. By clicking on the device and selecting Properties tab indicates the device is working properly. looking at + system devices in Control Panel under USB Controller all seem OK. Looking at + Panel configuration/devices & Printers + does not show a camers. (For some reason, this laptop doesn't have an applciation of camera like on the Win 7 version (don't know why?) when the Toshiba web site is checked.)

  I was looking for Panel start with "camera" and all I get is a list of menu small
  -CameraSettingsUIHost.exe
  -ViewScanners & cameras

  By clicking on the file EXE does nothing.
  It is located in four files when you perform a search in windows for this.
  By clicking on "ViewScanners"... "a dialogue window which should display the devices listed, connected and turned on. -There is nothing showing?

  Click the Add button and crossed in the following windows, but only four manufacturers of cameras in the list, Dell, Kyocera, Lexmark, Xerox - neither of which is Toshiba.

  Can anyone suggest what steps are needed to 'find' the camera again?

  I found on
  
  a file from Toshiba Web Camera Application < tc30463200a.exe=""> , size 86 MB, for Win 7 32 bit to Win 8 64 bit.

  There are hundreds of laptops listed, but not my specific - the only L870 are «...» L870-ST2N01, L870D-BT2N22, L870-ST2NX1, L870-ST2N02, L870-BT2N22, L870D-ST2NX1... »

  Should I install this application, although there is was that nothing installed initially?

  Thank you in anticipation of the answers.

  Hello

  First of all, you said you have a Satellite Pro L870-171 the link you posted above leads to the Toshiba driver page we your laptop is a European series, so you must use the drivers supplied by Toshiba UE driver page.

  Your L870 Pro Satellite belongs to the PSKFPE series and the drivers can be found here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  However, I think that the webcam software is already preinstalled on your laptop, but you have looked in no position to webcam that you should not look in Control Panel, or in the Device Manager in you want to start the webcam program.
  You must start windows explore and go to all programs-> Toshiba
  There you should find the webcam utility.

• What Ram modules are used in the Satellite Pro L870 18R

  HYA

  I m new to this forum so apologies if I posted in the wrong place.
  I just bought a Sat Pro L870 18R for my wife as a Christmas pressy.
  Before she gets to him I was going to increase the Ram of 4 GB to 8 GB.

  I know he has a single stick of ddr3 1600 Mhz in it, but without opening it you know which manufacturer to use Ram Tosh for this machine?

  I like to keep the same manufacturer.
  If I can at least give him a chance to run dual channel. I know I couldn't just take part and look like I m going to have to open it to adapt to the new ram anyway.

  I just i didn t want to keep o he packing and unpacking, and opening and closing upward are a gift after all lol.

  Any help appreciated thnk

  Above all the RAM brand is very important to get the RAM running in dual channel.
  It is important that the two RAM modules will support the same features.

  As far as I know the unit was equipped with a SO-DIMM 4 GB RAM DDR3 1600 module MHz (PC3-12800). I guess the reference is: * PA3918U-1M4G *.

  Welcome them

• Re: Satellite Pro L870-17 X - screen becomes black in 2 minutes

  Hey everybody.

  Just bought a Satellite Pro 870-17 X and for some reason any the screen keeps going black. The laptop actually happens in mode "sleep" or similar.

  The most obvious thing would be the settings, but after having adjusted the he used to always last more than 2 minutes (timed to check).

  Really confused with this ideas would be much appreciated.

  Thanks in advance... :-)

  I put t understand that hear you with black screen goes but try it please change power for certain power plan settings.
  There you can find the settings on the brightness, turn off the display and put the computer to sleep.
  Play with these settings.

• Satellite Pro L870 - missing some drivers for Win 7 - unknown device DEV_1E3A

  Just took delivery of some new L870 Pro of Satellite we have reinstalled Windows 7 but seem to be missing some drivers. I downloaded installed all the drivers available from the download site but we still have an unknown device.

  VEN_8086 & DEV_1E3A

  Looking around it can be an IMEI chip but I was not able to confirm the DEV ID of any of our sources generally. Does anyone have an idea what it is and where I could get the 64 bit Windows 7 drivers?

  Post edited by: Bashfuluk

  Hello

  Please check this HowTo.
  + How to identify an unknown device? +
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  To my knowledge, the 8086 Dev_ID belongs to Intel
  So there must some Intel driver.

  Have you installed all the drivers for the Toshiba driver page? Do this

• How to disable Hypermemory on satellite Pro L650 - 17 p

  Hallo,

  in my computer laptop are 4 GB of installed RAM, but due to Hypermemory, I'm only able to use less than 3 GB. I often use a lot of RAM, so my question is how to disable the function Hypermemory.
  I've planed to upgrade memory up to 8 GB, but then I read that if 8 GB are installed, the use of memory by Hypermemory will extend up to 3 GB so that I can only at the user up to 5 GB of RAM. This makes the insane level RAM.

  * So, is it an opportunity to disable Hypermemory? *

  I looked in the BIOS (version 2.20) for this purpose, but it was not such an option.
  I'm under Win7 in 64-bit, so the allocation of memory is not a problem.

  Hello

  > So is it an opportunity to disable Hypermemory?

  It is not possible.
  A part of the main memory is shared by the graphics card and this is controlled automatically by the graphics driver.
  AFAIK you can also find this information in the user manual

• Satellite Pro L870-172 crashes whenever an update of the display driver is tried

  So I managed to restore my laptop back to factory settings, but every time I try and make a video driver update, either through toshiba drivers or computer AMD, it always freezes... Always.

  Has anyone else had this or something similar?

  On another attempt, I thought I would try to install just enough updates to me on windows 8.1. By selecting only the updates of windows x 64 they installed fine until I had to reboot and blammo... Back to the 0 xC0000001 error which means that it is fuck the new :-(

  There, can anyone help?

  What ATI / AMD driver version is preinstalled and which driver version you used for the update?

  By the way: I guess that victory 8 64-bit is still preinstalled. Maybe you need to update this to win 8.1 system 64-bit