Hypervisor vs XP

Similar Questions

• HP Envy 700-529: hypervisor does not not on HP Envy 700-529

  Need to get virtualization running on my HP Envy 700 - 529 (bought on sale at BestBuy.ca) running Windows 10.  Have successfully installed all the object (I think), but get the following error when I try to commit to Hyper-v:

  https://www.dropbox.com/s/maf1w3mzbjzzz3d/screenshot%202015-10-23%2012.06.08.PNG?DL=0

  Error message reads as follows:

  "{VMID}" was able to start.
  
  Virtual machine "{VMID}" could not be started because the hypervisor is not running.
  ...

  .. .and the message continues.

  Can anyone offer any assistance?  Update the chipset using the downloaded from the section "Software and Drivers" http://support.hp.com site seems not had any effect (although I don't quite know I use it correctly).

  Any help appreciated!

  
  Ross is a .NET software developer, currently working as a consultant for the Government of Canada in Ottawa - the Canada national capital.

  Hello

  You will need boot into the BIOS and change the following default setting is disable.

  

  Thanks for posting on the forum.

• paviloin m9067.sc - was: hypervisor

  How can I activate hypervisor and EPT, it will be posible to run hyper-v

  Check which version of windows is installed in your desktop PC.

  Click on the new icon in the systray notifications, then all parameters.  Now click on system (display, notification, apps, power. Now, click on the topic in the list below the system. Look at the edition for which you edition.

  Hyper-V is only available in editions Windows 10 Pro, teaching and business.  It is not available in Windows 10 Home.

  If you have installed Windows 10 Home you still have options. You can use the virtual machine VMWare and Oracle software.

  VirtuialBox

  https://www.google.nl/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0ahUKEwjWu9bR-orKAhWCfxoKHTMWDtMQFghAMAE&url=https%3A%2F%2Fwww.virtualbox.org%2F&usg=AFQjCNHpshI_45ZdaFl7Mvf-glSeroKujQ&bvm=bv.110151844,d.bGQ

  Player of VMWare Workstation

  https://my.VMware.com/Web/VMware/free#desktop_end_user_computing/vmware_workstation_player/12_0

• OR RT Hypervisor can run on PC?

  Dear Sir.

  LabVIEW RT can run on PC, my question is can NI RT Hypervisor work on general PC, too? and it is free to download?

  Who could help me install windows AP on the same platform.

  OR RT Hypervisor can support Windows 7/8?

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207302

  Thank you

  

  Hi newbie-2009

  (1) as Daniel says NEITHER RT Hypervisor requires an intimate knowledge of the hardware configuration of the system, National Instruments recommends the use of the RTO that is located on the site of NOR.

  2) there are other RTOS supported by National Instruments but used OTR depends on hardware or the version of LabVIEW. Take a look at the following links.

  What operating system is my controller real time running and why?

  Introduction to Linux OR real-time

  Under the hood of Linux AND real-time

  Concerning

  R. Esteban

• See a hypervisor system in MAX

  Hello

  I have a hypervisor system put in place and I can see the partition of RT in MAX on the Windows of the system partition.

  I don't see it max on another machine on the same network, so my question is if I should be able to?

  Kind regards

  Sarah

  You can navigate to system RT on the side via FTP using Windows Explorer and then download the rtexe in the rt/startup folder which should start this exe on a reboot of the system.

  Kind regards

• Hypervisor Shared Memory Error Message

  Hi all

  I put in place a system of hypervisor using a SMU-1082 and SMU-8135. In the implementation (using the hypervisor Manager), there is no problem. However, when the system restarts in Windows hypervisor mode, I couldn't connect to the RT system. If I load the Virtual Console, I get the error attached. In MAX, at first, I could see the system as a remote device. However, I could change the software inside the RT, devices do not full list of installed PXI modules. If I restart in Mode safe, I could install the software but I still didn't have the modules connected to my system RT in MAX.

  Please advice, what is happening and how to solve this problem.

  You'll want to make sure you get to a first point where you can see the side of RT systems remotely whenever you start in hypervisor mode. Common issues with this are you're not fill the network connection and side Windows can't find it. You can always start directly in the CR (via the bios setting) and view the console out to see what it is using the IP settings and try connecting manually by IP Max when you are in hypervisor mode.

  If you do not see the modules in the chassis there are two things I can think immediately. First of all, make sure to add and identify the chassis under the lens of RT in Max make sure you have all the device drivers required for the modules you use, installed on the target. Things like RIO for FPGA, XNET XNET, DAQmx hardware for DAQ hardware targets, etc.

• Hypervisor-HyperTerminal: how to write texts in HyperTerminal to a VI in real-time

  I use on my PXI system hypervisor. With 'Specifications to build', I built my RT application in a standalone rtEXE file and set it as start VI for my RT system. It seems to work, since I have received information from my "hypervisor-HyperTerminal" while restarting the RT system.  He writes, "Startup Application: d:\ni-rt\startup\RTMain.rtexe. However, I don't see how my RT application is running or if an error occurs.  Therefore, I think to write texts or my RT application information to the HyperTerminal.

  I wanted to use VISA to the serial port of the HyperTerminal on the side-access system in real time. I used the example LabVIEW "basic series write and Read.vi ' to 'smplserl.llb '.  Under the system in real time, I found only a single resource VISA name, which is "COM1".  Apparently, I can write successfully texts at the port "COM1", because no error was shown in the example VI. But the texts do not appear on the HyperTerminal.

  Do you have an idea, what I did wrong in my attempt, and how I had to do it correctly? Thank you very much.

  Kind regards

  Scarletice

  Hello Scarletice,

  You can use the Debug String VI (http://zone.ni.com/reference/en-XX/help/370622J-01/lvrtvihelp/rt_debug_strings/) RT a message programmatically to the console at the time on a Real - Time Hypervisor system LabVIEW Real-time.

  Please let me know if you need additional help, and have a nice day!

  Best regards

  Casey Weltzin

  Product Manager, LabVIEW Real-time

  National Instruments

• MAX indicates PXI card when it is started in Windows but not in hypervisor mode

  Hello again all you lovers forum useful!

  I'm having some difficulty with a hypervisor type system see two maps of programmable resistance of 6 channels of Pickering which are loaded in the PXI chassis.  When I boot in Windows mode, MAX sees them very well under My system.  When I then run the hypervisor configuration software, I see both listed and get them assigned to the operating system in real time.  However, when I then starts in hypervisor mode, MAX did not see their money remote systems-> hypervisor target--> chassis (or elsewhere) and the report of pilots do not see all the modules either when I debug my code running on the system in real time.

  Someone has an idea what setting or configuration I may be incorrect?  Is there any other information I can provide that would be relevant or useful to respond to this question?  I'm not the main material guy, he just got married and therefore is not available, so I'm out of my comfort zone.  ;-)  I write software that runs on the system, however, so I'm not completely clueless.  I know we just replaced the controller in the main chassis by a faster (unfortunately, I don't have the number on the spot, the Simulator is down in the laboratory), but I also know that we use the same controller and map of Pickering on a different Simulator and it works fine.

  Any ideas?  I really appreciated your time!

  -Joe

  Too bad, the answer proved to be that I don't have the drivers completely installed on the system in real time.  Apparently, which caused it not to recognize the cards.  I never did understand / remember exactly how to install the drivers of Pickering on the side in real time, but fortunately I was able to simply copy all files that had 'Pickering' in their name in the folder C:\ni-rt\system of the file directory in real time from another Simulator for this one.  ;-)

  See you soon!

• OMIVV 3.0 - errors "Hypervisor not taken in charge", cannot day several firmware M610 hosts / ESXi 5.5 U2

  We have just updated OMIVV to version 3.0.

  We have problems with 3 guests in our infrastructure - M610 all running ESXi 5.5 U2 P55.  Any report of strangely hosts in OMIVV.

  -"Unsupported hypervisor" is reported in the screen "check hosts compliance."

  -We can update the firmware on the individual hosts, but the update of multiple hosts in the cluster level does not at all.  The inventory of the firmware page does not display anything.

  All the other features seem to be working on these hosts and all of our M620 do not act in the same way in OMIVV.  All the firmware is completely updated already on all hosts.

  Hi eltuga,

  Officially the 2950 is not supported by VMware to run vSphere 6, see http://www.vmware.com/resources/compatibility/search.php?deviceCategory=server

  

  Also the integration of the Dell OpenManage for VMware vCenter also does not support the 2950 more see the http://topics-cdn.dell.com/pdf/dell-mp-vc-3.0_Concept%20Guide_en-us.pdf compatibility matrix

• How to install Dell OMSA on a free host VMware or VMware vSphere Hypervisor comments?

  We are virtualizing our 2012 R2 Windows Server and you have a Dell PowerEdge T310 server. We have installed vSphere hypervisor free version 5.5 on the physical server.

  Does anyone know how to install the Dell OMSA? I heard that it will not work if it is installed on the Windows Server R2 2012 host because of the virtualization layer.

  I read a few posts on how it's done, but I can't always get my head around it. I think I've also seen people install a VIB on the hypervisor vSphere itself?

  Can you please describe the General steps or point me in the right direction on how to run the OMSA? The Dell PowerEdge server has a RAID, and we must use OMSA to see a RAID controller unexpected sense errors if they are generated. We used to have a problem with consistency RAID and have had to start again before.

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Hello

  There are a lot of articles and posts on how to install OMSA under VMware. If you encounter problems then please post an explanation of what you are having problems with. Here's a post I did on the subject. It has a link to a youtube video that includes step by step instructions:

  http://community.Spiceworks.com/topic/403141-Dell-open-mange-in-VMware

  jeff0000

  He also seems to be an OMSA plugin for vCenter, but I don't think we can use vCenter because it's the free version of vSphere hypervisor.

  Integration of OpenManage for VCenter requires always the OMSA agent must be installed on the hypervisor. Correct, it is not a free version of VCenter. No installation procedure who advises using VUM or VCenter should be ignored because you will not have access to these utilities.

  Thank you

• Run OEM Windows Server on hypervisor on the same hardware?

  (1) get physical server which includes licensed OEM for Windows Server.

  (2) wipe the drive and install a hypervisor, such as the independent (free) version of Hyper-V

  (3) install copy OEM of Windows Server on the virtual machine running on the hypervisor

  Is this legal, in what concerns MS licenses, and there will be problems with activation? I have scoured the internet looking for the answer and have determined that it is absolutely not possible. And I also determined that it is absolutely possible. In fact, nobody seems to know for sure. Everyone here knows for sure?

  Yes, you can, and Dell tells you how (licenses are different for 2003, so this applies to the 2008 and subsequent versions).  You can even install OEM 2008 on the physical server, and then install it as a virtual server, as long as the physical instance is only used to manage the virtual instance (Hyper-V), the Hyper-V hypervisor or other free/independent is not necessary.  Each edition (Standard, Enterprise, etc.) is a license for a different number of virtual instances.

  content.dell.com/.../Documents~virtual-machines-oem-media.pdf.aspx

  www.dell.com/.../WS08_Media_VM_Final.pdf

  www.Microsoft.com/.../confirmation.aspx

• How do I know if the hypervisor is installed on FlexFlash

  I have a UCS C240 Standalone client server which has a card SD of FlexFlash installed in Slot 1, but none in Slot 2. The FlexFlash controller displays the State of health as"RAID"degraded "because of course there is no other mirror card. The MMIC runs firmware later than version 1.5, which means that the controller is compatible with RAID I think reset the controller FlexFlash should clear the error. However, I would like to know if the hypervisor (ESXi) is installed on the FlexFlash or not as this would determine whether or not I can reset without failure.

  Where would I go to find out if the hypervisor is actually installed on the map of FlexFlash or normal storage in the LSI Raid Controller?

  See you soon,.

  Tom

  Tom,

  You are right, that the degraded RAID is due to the fact that the drive is unable to form RAID with a single SD card. The reset should clear. Discover the boot order and see what the server is configured to start from:

  Boot order

  

  The Flexflash controller may appear as a HV partition:

  http://www.Cisco.com/c/en/us/products/collateral/servers-unified-computi...

  HTH,

  Wes

• Let me know scenarios when different virtual machines with the same UUID are created in VMware Hypervisors?

  Let me know scenarios when different virtual machines with the same UUID created in VMware Hypervisors, aside from editing the .vmx file?

  The only other way I've seen is when you manually copy the virtual machine to another location on the data store (or another data store) and then when turn on/off the virtual machine, select I moved, rather that I copied it (the default option).  This will keep the same UUID.

• What are the new features included in ESXi Hypervisor improvement?

  What are the new features included in ESXi Hypervisor improvement?

  Refer to the technical white paper VMware for what's new in 6.0

  https://www.VMware.com/files/PDF/vSphere/VMW-WP-vSPHR-whats-new-6-0-PLTFRM.PDF

• Hypervisor ESXi6 and sharing of NAS storage

  Is it possible to connect a NAS storage server hypervisor host ESXi6 as a data center?  Or is it a feature reserved for vCenter.

  You need not vcenter to connect your ESXi on an NFS share.