I access my favorite but hangs or crashes when you try to go beyond the home page.

Similar Questions

• When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions.

  When starting, my windows xp hangs or crashes when you try to load 'personal settings '. I can't do something, but stop once again on commissioning, she repeats the same actions. What now? Thank you

  Hello

  Disconnect all external devices from the computer and try to restart the computer and check what is happening.

   

  Step 1:

  Try to boot to the desktop in safe mode and check what is happening. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://support.Microsoft.com/kb/315222

  Step 2:

  If you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

  http://support.Microsoft.com/kb/310353

  If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

  Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

  Someone please help!  Thank you

  In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

• 16, Firefox, I reinstalled about 6 times, hangs and crashes when you try to load the first page on my new laptop windows 7.

  On occasion, the program will load a window to say "Familysearch.com" but hang for awhile when a subroutine is called. Lately, I can't seem to get the first loaded window. Reported no accidents called at all.

  I just did the reset option, and it does not solve the problem. Actually did you 'fix' a couple of other times.

  Thank you

• MAX crashes when you try to connect to the remote server in VISA

  Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

  http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

  but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

  Hardware Dell with Windows XP Professional and SP2 computers

  The server computer has a 16 port Rocket port RS232 port Council

  I will access ports with a program written in LV7.1, but I haven't gotten that far yet

  Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

  Thank you

  CS

  Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

• HP 8660 hard crash when you try to set up the network

  So, the strangest thing happened to my all-in-One printer, apparently without me even not touching.

  We have changed our ISP and had to spend our routers/wireless modems in our apartment. It is - of course - our printer drop the connection to the network - no surprise.

  So the big weird thing is, when I now try to establish a connection to our new network, our hardcrashes printer and needs a reboot (ie. on / turn off the) to the same function again.

  When it crashes I get a brief error message VERY (less than one second - white letters on a BSOD background), after which all the LED lights on the printer starts flashing and the screen tells me that the printer must be powered on/off voltage.

  The code (I tried to catch in the less-than-per-second duration is shown) is: B8409490

  When the printer is connected by wire (LAN), everything works like a charm. Using the copy function works fine as well. But since a cable solution is exactly what we were looking for, any input as to what the problem could be is greatly appreciated!

  PS:

  I tried to reset the settings and the use of the factory through the hidden «menu factory» reset Problem persists.

  Hi Diojr,

  Thanks for your reply and information!

  I'm sorry to see that you receive the error message when you try to connect to your network. I see the wired connection works fine. I noticed that you have already tried a factory reset and the same problem persists.

  If you haven't already done so, I suggest updating the firmware, and then try to reconnect to your network (wireless).

  Please let me know how it works for you!

  Click this link for downloading the Firmware update, select first your operating system and then download:

  Officejet Pro 8600 Firmware update

  Good luck

• "Hang on" VM when you try to boot from the CD-ROM host or .iso

  I would appreciate any help on a problem I have. I just

  installed VMWare server 2.0 on a Server 2003 64-bit computer. I tried

  creation of 2 new reviews VM but I am unable to install an OS that I can't

  make use of the CD-ROM. If I "Add Hardware" and add the CD-ROM drive.

  Reset the computer I actually see the spinning of CD-ROM and the

  light on as if it is reading, but the VM console is just empty. Just a _____

  in the upper left corner. Same thing if I try to use a .iso. So I have

  Cannot use the CD ROM or a .iso file. That someone has it all

  suggestions? Thank you very much.

  Hello again. You can start any .iso image? What happens if you try to boot from the memory Tester ISO I have attached to this message - works very well with guests on my host server 2.0?

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Finder crashes when you try to click with the right button on any file or icon

  I'm on Capitan 10.11.3. Any icon on the desktop or in finder itself is affected. In addition, I can't open the app store or quicktime.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Muse crashing when you try to copy guides

  Muse was crashing when you try to copy guides from Master Pages.  Anyone else having this problem?

  ozgazl wrote:

  Same for me - if I try to 'cut' a guide to remove it, adobe muse crashes with the following:

  Yes everyone who arrives, you can not copy or cut a guide... the bug is that Adobe put the option to when you click right one

• Adobe Premiere elements 12 will be not open. Crashes when you try to load 'importer quick time. "

  I have windows. I tried to uninstall and reinstall. As I said in the title, it tries to open but crashes when you try to load 'importer quick time. " Help, please!

  the link you show the locations of preference files so you can delete/rename them without having to open the program.

• Help - Photoshop Elements 8 crashes when you try to start multimedia

  Photoshop Elements 8 crashes when you try to start the Organizer. It is funny, from the editor of Photoshop is not a problem and works fine.

  I uninstalled the software and then installed again, but had no effect.

  What can I do?

  Nick

  Hold down the shift Organizer launch wjilst, and then click to create a new catalog, for example My Catalog2

  If the empty catalog open try to import multiple JPEG files and this will help to determine whether the original catalogue is defective.

• My BDP-S3100 crashes when you try to load Netflix.

  Player BDP-S3100 crashes when you try to load Netflix.  It gets stuck on the red logo screen.  While the loading bar continues to move as it loads, it never advances to the Netflix menu.  By pressing the back, home, or any other button does nothing.  Physically pressing the power button on the player does nothing.  The only way to resolve the issue is to unplug the drive completely.  All other app works very well and no internet connection is down.  Any help would be appreciated.

  Hi lcornell!

  Please make sure that the Blu - ray software is up-to-date. Click on this link to check the latest firmware of the device.  

  Don't initialize any personal information.

  1. on the remote, press the HOME button.
  2. go to settings.
  3. under settings, select Reset.
  4 reset, select initialize personal information.
  5. check if the Internet videos are back.

  If the problem persists after performing the above steps, try resetting the player to factory default settings.

  A Factory Reset.
  1. to support the remote control, press the Home button.
  2. go to settings.
  3. under settings, select Reset.
  4 4 remise back to zero, select Reset to Factory Default Settings.
  5. Select all settings.
  6. If the drive turns off after the reset, just turn it on and the Easy Setup appears on the screen. But if the player does not go out only to return to the Setup Menu then go to Easy Setup. Just follow the guests on the screen to complete the initial installation of the player.
  7. check if the problem is resolved.

  If my post answered your question, please mark it as "accept as a Solution.

• Firefox crashes when you try to attach a file to gmail compose

  Laptop Vista 32. When you try to attach a file to a gmail account, compose explore dialog and then firefox crashes. Happens every time and began (I think) with the 16 or 17 years old version. Updated plugins, crossed of troubleshooting on the Help menu, I tried safe mode. All to nothing does not. IE works fine.

  After reviewing all services and startup programs using msconfig, I've isolated the problem to a conflict with Dell Media Center in starting. I deleted the software (preinstalled on your laptop) since I never use anyway, re-enabled the acceleration hardware Flash and deleted the line mode protected in the file flash cfg.

  NO MORE CRASHES when you try to attach a file to a message in gmail!

  Thanks for all your help - could not have corrected it without you.

• My MMC crashes when you try to add the Certificates snap-in

  My MMC crashes when you try to add the Certificates snap-in

  Error: Microsoft Management Console has encountered a problem and needs to close.

  When to see the details, it shows a mfc42u.dll error.

  Hey Sankar,

  Try Mircosoft Fixit: http://support.microsoft.com/gp/slow_windows_performance

  You will need to authenticate Windows.

• Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

  Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

  You have two options:

  • Perform the action under high administrator privileges.
  • Turn off UAC (not recommended).

  Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.