I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

I tried to take different paths, as via the Control Panel, but it's the same thing.

Operating system?

Try the following: -.

Open search Vista Start Menu Bar and type: RUN

Click OK

Type the following lines, and after each one, click OK: -.

regsvr32 jscript

regsvr32 vbscript

regsvr32 /i mshtml

No guarantee

TaurArian [MVP] 2005-2010 - Update Services

Tags: Windows

Similar Questions

  • When I click to open windows update I see on the screen (the page failed to load)

    When I click to open windows update I see on the screen (the page failed to load)

    I'm trying the two just doesn't work

  • When I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work.

    I am under Windows Vista Home and when I start the system, I get the message "failed to load Launcher dll" I hit OK and the system load and seems to work. I'm afraid that something is not correct, what do you recommend? The two available Service Packs have been installed.

    Discussions were merged.

    Deleted duplicate.

    Original title: failure of the Dll

    The error seems to be a common problem with Dell laptops:

    http://en.community.Dell.com/search/#q=Lanucher%20dll&sort=rating%20desc&defaultAskForumId=0&pi1680537405=1

    It seems that apoint.exe gives the error that indicates that the problem is with the Alps touchpad driver.

    Try to uninstall the Alps touchpad driver and then install the latest version available from Dell for your laptop:

    http://www.Dell.com/support/home/ca/en/cabsdt1/product-support/product/Inspiron-1545/drivers

  • Windows Update page fails to load

    After that my updates of September, my update page now shows just to the white top with a message in the middle that says page does not load.  Still, Windows Update automatically and download of updates, but I have to stop inorder to install.

    I used the fix it tool link here in the forums and have downloaded and reinstalled the last updated using the links here in the forums too.

    However, when I use the Windows Update menu start or get them all of the control panel is a blank page in the window with the message in the middle that the page does not load.

    I have sent an email with the same question but thought that post in the forum too.

    Also, I use Vista Ultimate.

    There is no error created by trying to open the link, just a blank white page with "Page to not load"

    Hi, I tried the above, and my windows update always said "page failed to load". are there other methods to solve this problem, or another way to update my windows vista? Thank you

    Update: windows blinds was the problem and needed to be updated. He has somehow conflicts causing the error "unable to load the page. for those of you who do not have blinds on windows, check your other programs made by the same company (stardock) and update those. hope this helps those out there that have this same problem.

  • Widows Update page fails to load

    When I click on Windows update, I have THE PAGE failed to LOAD. How can I solve this problem?

    You cannot update a Vista computer via "windows update page."

  • Update for Windows Vista "Page Failed to Load"

    I have Windows Vista Ultimate on an Acer Ferrari 5000, running an AMD Turion 64 x 2. I believe that I have service pack 2. Windows Update tells me I need to update, but whenever I have pull up, whether in my task bar, start menu or the Windows update page, it says "page failed to load". What should I do?

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Error, "Page failed to Load", while customizing the control panel.

    Hello

    I recently inherited a second hand dell tower which has Windows 7.

    Everything seems to have set up ok but when I go into control panel customization, I get the message "Page failed to Load".

    After having sniffed around, it seems that the Control Panel does not use a program that the computer recognizes.

    I went through various forums for the answer, but nothing helped.

    Any suggestions?

    Hello

    Thank you for the update. It is unfortunate to know that you still experience this issue.

    As you are facing the issue in the safe mode, as well as in the new user account, it seems that there is corruption of system files that cannot be replaced by the new file system. But, you can also try to check your hard disk for errors of the last step. Read the following article.

    Check your hard drive to find errors in Windows 7

    http://support.Microsoft.com/kb/2641432/en-us

    Warning: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Please, try the steps above and update with the State.

    Thanks again for we keep posted!

  • I tried change Classic theme but get error "the visual style clould not be loaded because the file failed to load"

    I have a problem with my windows xp theme. I have catchy to change Classic theme but theirs aren't Exchange and I apply another theme there is error "the visual style clould not be charged because the file failed to load" and I'm windows resulting in normal but agin theme same error. Please tell me the solution.

    Hello

    Please follow the steps below.

    Method 1:

    Run the tool from the link below System File Checker.

    http://support.Microsoft.com/kb/310747

    Method 2:

    Try to create the new user account and check if it works very well.

    http://support.Microsoft.com/kb/811151

    See also the below mentioned link.

    http://support.Microsoft.com/kb/555512/en-us

  • my systems page will not open error message "the page failed to load".

    Original title: my systems page does not open after going into the control panel and then system and maintenance

    my systems page opens not after going under maintenance then system and Control Panel. This shows simply "the page failed to load". I need to access this page to share files from one computer to the other. can anyone help?

    Hi Sarah Brown,.

    (1) remember you to make changes prior to this problem?

    (2) what is the complete error message you receive?

    Method 1: Run the fixit available in the link below and check if that makes a difference

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.


    Method 2:
    if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

  • How can I fix the "Windows failed to load because the system registry file is missing or corrupt.'

    all of a sudden my computer goes from fine to a "Windows failed to load because the system registry file is missing or corrupt."

    and I don't have any idea how to resolve this its driving me crazy.

    I downloaded the iso file for vista, the restore disc but it not start when I restart my computer. what im supposed to do or am I missing something?

    You need to change the boot sequence:

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • Windows Update - PAGE FAILING TO LOAD

    While trying to update windows I get "Failed to load the Page" message, what happens for a few months, this message is this little matter how I try to access updates

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Network and sharing - "the page failed to load".

    The network does not funtion on my new laptop computer. When I try to open the network and sharing, it gives me a white page that says "the page Impossible to load. It worked fine when I had last week. If I look at the devices it is said they work normally.

    Colombia-British

    Hello, spearbc

    Please use the Forum for answers!

    Have you installed a software between yesterday and today?

    To clarify, you get this error in the centre network and sharing, correct? (Image)

    You can try to run the System File Checker and let us know the results, analyze the system-protected files and replace the incorrect versions with correct versions of the files Microsoft.

    Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    Type the following command and press ENTER: sfc/scannow

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • This Page Failed To Load on Metro all the app in windows - like weather - 8 bing Ie...

    I installed Windows 8

    It worked well but after the installation of proxifire I have problem

    By default the Windows 8 App that shown on the start menu such as the weather, sports, news, that is to say, Bing ETC gives the error "This Page to not load"

    But the bureau and with Ie I can use internet successfully and also works good Proxis,.

    I uninstalled the proxifire to make sure that this problem was not because of that, but I still have the problem

    I just lost the metro app

    I need help to solve this prolem
    because windows 8 app is really amazing and I've lost the ability to use

    Best regards
    BanditIR

    helps the im having the same problem, that it worked ok so I guess that only a refresh or microsoft will have to do an update to this...

    I'm on key 3G huawei so maybe that is the issue, but it's never happened before.

    No need to update.
    Just uninstall the software of Huawei. Turn it back on.
    Then re-install the software of Huawei. All metro apps should now work.
  • My computer is telling me that "new updates are available", but when I click on the icon of the control window Panel\Windows update appears. In the middle of this window in the small print, it says: "Page failed to load".

    My computer is a HP Pavilion a6200n

    I am running:
    Windows Vista 32 bit.
    McAfee Security Center (Comcast version)
    Browser Mozilla Firefox (default)

    If you need more information, please ask and I'll do my best to get it for you.

    Thank you.
    SAPPH

    Hello Sapphiyre,

    Welcome to the Microsoft Answers Forum!

    To better understand the issue. Please let us know the details mentioned below:

    (a) don't you get the same error message when you click on other items in the Panel?

    (b) have you done with the latest changes on the computer?

    I suggest to reset the Windows Update components and check if this helps you fix your problem. Access the link below and try the Fix mentioned in the article tool to reset the Windows Update components automatically.

    http://support.Microsoft.com/kb/971058

    I hope this information helps. Please get back to us if you have any other questions on this subject.

    Thanks and greetings
    Mir - Microsoft Answers Support Engineer
    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads

  • Update from 4.1 to 4.1u1 in the file failed to load on Update Manager

    Trying to download the 4.1 to 4.1u1 update (update - from - esx4.1 - 4.1_update01.zip) to my Update Manager server, I got the following error:

    File name: update - from - esx4.1 - 4.1_update01.zip

    Cannot import the data.

    Cannot verify the checksum for every file to upgrade. This could be caused by corrupt

    the metadata or binary files in the file.  You can try to import one does not copy the upgrade file.

    I downloaded this ZIP file twice and every time I checked MD5 OK.  I even made a new copy of the file - same thing.

    What to do then my good people?

    ESX v 4.1

    v vCenter 4.1 update 1

    Update Manager v 4.1.0.6589

    There is no need to download the Upgrade Pack.  Just create a patch host database, this will include 4.1U1.  Fix for cluster or host, scan and fix.

Maybe you are looking for