I also get the error code 80070005 when you try to use Windows Update to check for the updates

I get this error code as soon as I try to check updates. It does not even say there are updates tells me to enable updates, but when I try it gives the code. I used Microsoft Fix and now it says everything is fixed and ok but it is not. So now what?

Hello

1. what Microsoft fixit did you run?
2. don't you make changes to the computer before the show?

I suggest you try the steps from the following link:

Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
http://support.Microsoft.com/kb/968003

Note: When you perform a virus scan Malware, you will lose data that are affected by the virus. Microsoft is not responsible for the loss of this data.

Tags: Windows

Similar Questions

  • Error code 8024001 when you try to use Windows update

    Original title: all the answers to fix the error code 8024001 fail.

    The answers to the difficulty of error code 8024001 fail.  He typed in the command prompt:

    net stop wuauserv
    Ren %systemroot%\SoftwareDistribution SoftwareDistribution.OLD
    net start wuauserv
    output
    accidents of Microsoft 'Fix It', requiring to uninstall and reinstall.
    I could not update my updater in some time and more and more programs become problematic due to lack of updates.  Many others have asked the same question, for some time now.
    BOO, HISS Microsoft!  How about a real solution on the "Fix It" site!

    Hello

    Were there any changes (hardware or software) to the computer before the show?

    If you receive the Windows Update 8024001 error while trying to install updates, an update to Windows Update is installed. Depending on how many programs are running and the operating system files or folders are affected as this update is installed, it may take several minutes before you can install other updates for your computer. Try installing updates later.

    If so to resolve this issue, rename the Spupdsvc.exe file, and then try again to install updates. To do this, follow these steps:

    a: ClickStart, and then run.

    b:   Copythe following text,paste it in the run box and then click on OKor press on ENTRY:

    Cmd /c %WinDir%\System32\Spupdsvc.exe Spupdsvc.old ren

    c: try again to install updates. If you can't always install the updates.

    Hope this information helps.

  • Error code: 80070424 when you try to use Microsoft Update

    I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

    I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

    If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner.

    Cleaning the components of update on your Windows XP computer

    It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

    Download and run the MSRT tool manually:
    http://www.Microsoft.com/security/malwareremove/default.mspx
    (Ignore the details and download the tool to download and save to your desktop, run it.)

    Reset.

    Download/install the latest program Windows installation (for your operating system):
    (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
    (Download and save it to your desktop, run it.)

    Reset.

    and...

    Download the latest version of Windows Update (x 86) agent here:
    http://go.Microsoft.com/fwlink/?LinkId=91237
    ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

    Close all Internet Explorer Windows and other applications.

    AutoScan--> RUN and type:
    %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
    --> Click OK.

    (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

    Reset.

    Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
    How to reset the Windows Update components?

    Reset.

    The less you have to run all the time, most things you want to run will perform:

    Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

    You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

    Do a house cleaning and the dust of this hard drive:

    You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

    Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

    If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
    http://www3.TELUS.NET/dandemar/spack.htm
    (Especially of interest here - #4)
    (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

    You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

    How to use disk cleanup
    http://support.Microsoft.com/kb/310312

    You can disable hibernation if it is enabled and you do not...

    When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

    -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
    -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
    -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

    You can control the amount of space your system restore can use...

    1. Click Start, right click my computer and then click Properties.
    2. click on the System Restore tab.
    3. highlight one of your readers (or C: If you only) and click on the button "settings".
    4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
    5. click on OK. Then click OK again.

    You can control the amount of space used may or may not temporary Internet files...

    Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

    -Open a copy of Microsoft Internet Explorer.
    -Select TOOLS - Internet Options.
    -On the general tab in the section 'Temporary Internet files', follow these steps:
    -Click on 'Delete the Cookies' (click OK)
    -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
    -Click OK.
    -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
    -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

    You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

    CCleaner (free!)
    http://www.CCleaner.com/
    (just disk cleanup - do not play with the part of the registry for the moment)

    Other ways to free up space...

    SequoiaView
    http://www.win.Tue.nl/SequoiaView/

    JDiskReport
    http://www.jgoodies.com/freeware/JDiskReport/

    Those who can help you discover visually where all space is used. Then, you can determine what to do.

    After that - you want to check any physical errors and fix everything for efficient access"

    CHKDSK
    How to scan your disks for errors* will take time and a reboot.

    Defragment
    How to defragment your hard drives* will take time

    Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

    Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

    If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

  • 52D error code appears when you try to install windows updates

    Error Code 52D and it will not install my update

    Reset Windows Update components:
    http://support.Microsoft.com/kb/971058

    Otherwise, go to the Download Center microsoft and download the manual to install the update package using the number of the update and install it on the computer.

  • XP - Error Code: 0X80072EFF when you try to install Windows updates

    System:

    Microsoft Windows XP Professional

    Version 2002

    Service Pack 3

    Manufacturing: Toshiba Satellite

    Intel (r) Core (TM) 2CPU

    T7200 @ 2.00GHz

    2.01 GHz 2.00 GB RAM.

    http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

    on my laptop gives:

    [Error number: 0x80072EFF]
    The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

    For self-help options:

    To support options:

    I use McAfee that I did a deletion and update July 01,2010 and reset Windows Update using the instructions provided in the Microsoft answers:

    Error number: 0x80072EFF; Fixes for Win32 and svchost.exe generic

    but get the same error from Windows Update.

    Full scans of my computer by Microsoft, McAfee and Malwarebytes' Anti-Malware don't report any questions or a problem.

    My last Windows automatic update was better as I remember successful in March 2010.

    Thank you for your support.


    By default, Win7 is more secure than Windows XP, Yes. If you decide to "switch" to Win7, but keep pressing this freebie ugly AOL/McAfee, chances are that you will be infected again later. I wish that you were runningMicrosoft Security Essentials (free), NOD32 or Kaspersky Anti-Virus (not free).

    NB: If you upgrade the computer to Windows XP to Win7, it will essentially be a "clean install". While most of your Windows XP data will be stored in a folder called Windows.old, I wouldn't trust safety of this right off the bat because of the infection aleady-today ' hui.

    However, you can format the hard drive and do a clean install of Windows XP to resolve the infection. Who would you save a few $$ and you would not have to learn a new operating system (e.g., Win7). Details available on request.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I get the error code 646 when I try to install windows updates.

    I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

    I get an error Code 49 when you try to update my applications. I emptied my Temp folder. I have a Mac. Help, please.

    Hello

    Reference:--

    Open the Temp folder.

    Clear the contents of the Temp folder.

    Disable your Antivirus and firewall computer for awhile.

    Launch Desktop CC and try to download Apps.

    You can also consult the document below.

    Error downloading creative cloud applications

    Hope this helps!

  • When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.

    When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

    Tre,

    A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

    Suggest you download and save the fix it.

    Then close all open programs and browsers before running MS fix 50686.msi.

    `~`

    Suggest that you first spread malware as the cause of the problem by following these steps:

    (1) have your system scanned by the antivirus/security suite installed.
    (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

    http://support.Kaspersky.com/viruses/solutions?QID=208280684>
    (3) download, install, update and run full scans with two of these tools free anti-malware:

    MalwareBytes AntiMalware

    http://www.Malwarebytes.org/products/malwarebytes_free>

    SUPERAntiSpyware

    http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

    (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

    http://support.Microsoft.com/kb/310747>

    `~`

    If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

    How to reset Windows Update http://support.microsoft.com/kb/971058components >

    Suggest you download and Save it. Then, close all the open programs and web browsers.
    Run Microsoft Fixit 50202.msi and choose its default mode.
    After that he finished the race, see if the return code is displayed again when looking for updates.

    If not, then run the Fixit once more and choose his Aggressive mode.
    Restart once it is finished and see if the return code always appears when the updates.

    IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

    Please let us know if it did or did not help to solve your problem.

    If this ANSWER helped, my post as ANSWER of marking close your thread.

    06/26 / 1108:34:03

  • Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

    Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

    I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

    They did not work.  So, will you be able to help me find a solution?

    Thank you

    Ken

    Hello

    1. is that the copy of windows is enabled?

    2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

    I suggest to perform the steps in the following article and check.

    Method 1: run the Windows update troubleshooting tool and check.

    The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

    Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

    To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below for more details:

    How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
    http://support.Microsoft.com/kb/929135


    Note:
    When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

    Method 3: If the problem persists, follow the steps in the following article.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

     

    Note:

    un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

    How to back up and restore the registry in Windows

    b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

     

    For reference:

    0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/946414

    Note:

    un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ ( )

  • Error number: 0 x 80070424 when you try to use windows update

    When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

    RichardTensing,

    Try other steps mentioned in the article

    http://support.Microsoft.com/kb/2509997

    `~`

    http://support.Microsoft.com/kb/968002/>

    `~`

    If no joy, click the round to start, in the search in field type

    cmd

    Right-click on cmd.exe and select ' run as to administer. Follow the prompts to allow the command prompt to run.

    At the prompt, type it below, and press ENTER after * each * command

    regsvr32 c:\windows\system32\wuaueng.dll

    output

    Restart the system and see if it can be updated now.

    04/27 / 1107:46: 36 am

  • I get the following error code 80070bc9 when you try to do window upsdates

    I get the following error code 80070BC9 when you try to do a Windows Update. All of my updates have failed in the last three months and most have failed in the last six months. I found this problem when you try to install Itunes and received the error HRESLUT:0x8007054F. After researching this error, I was sharp may receive updates. Help, please.

    Hello Kristen,

    Follow the steps mentioned below:

    Step 1:

    Temporarily disable or uninstall the security software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2:

    Reset components Windows Update the link below:

    How to reset the Windows Update components
    http://support.Microsoft.com/kb/971058

    Note: Click on run in the file download dialog box and follow the steps described in the fix it Wizard.

    Hope this helps

  • I use Windows XP and get the error code 0 x 80070424 when you try to use Windows Update.

    When I try to access Windows update, I get an error code 0 x 80070424. I've read many threads, but want to make sure that the solution is for Windows XP

    Try this link

    http://www.techiecorner.com/112/error-number-0x80070424-in-Windows-Update-solution/

  • error code 80070005 when you try to update Windows

    I would like to know how to manage the automatic Windows updates when I get an error code 80070005.

    Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE) and does not seem to involve any malware or MSE...

    It is a Windows Update problem.  Suggest you search or post in the Forum Windows Update:

    http://answers.Microsoft.com/en-us

    See the following, screw that may or may not apply to your problem: http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/error-code-80070005-windows-could-not-search-for/fadcd02e-e6c8-407a-8327-33ccbdacd849

    Good luck...

  • Getting error code 80004005 When you try to install an update to windows 7

    When you try to install an update to windows 7, I get a failure during Windows Setup. The error code is 80004005.

    80004005 = unknown error 0 x - can occur due to programs/services to interfere in the background.

    http://support.Microsoft.com/kb/929135
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • I get this error code 646 when I try to download an update from the update of the window. __

    Update of security for Microsoft Office Outlook 2007 (KB972363)

    Download size: 11.0 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Important

    A vulnerability of security in Microsoft Office Outlook 2007 that could allow arbitrary code to run when a malicious web page that is updated it is open. This update resolves this vulnerability.

    More information:
    http://support.Microsoft.com/kb/972363

    Help and Support:
    http://support.Microsoft.com/?ln=en-us

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • ATFX DataFinder

    Hello Currently, I have following problem with ATFX (ASAM ODS) files and the DataFinder. ATFX data contains several matrices for different sampling rates high. The DataFinder can only create an index for the files that contain only a matrix. If I was

  • Patrick suena

    Hola, tengo the epson stylus tx115 multifunction y hace 1 my Quebec not uso... ahora encendi suena, send to print me not of as no tiene papel or tinta. not to do no el to nada e con arregla ntentado change only usb cable, las tintas, el papel... no p

  • Screen resolution and colors - how to set 16 bit

    original title: screen resolution and colors I have Windows Vista Home Basic package, but when I change my screen resolution, color change, it says 8 bit - low, but size of the screen (640 x 480 pixels) resolution is big for me, I need 1024 x 678 pix

  • HP probook 4545 s: can I change my graphics card

    Hi I have a Hp probook 4545 s and I use it a lot for the games and I was wondering if I could change to improve performance on my most demanding games. Thank you!

  • Switch KVM GCS632U - problems MS Egronomic Keyboard 4000 V1.0

    I used my v.1.1 4000 ergonomic keyboard from Microsoft and mouse between desktop Windows 7 64 bit Home Premium edition and a portable Windows 8 Pro via a KVM632U switch. The problem I have experienced recently is several times a day when you are conn