I always get a so-called mistake 'host process has stopped working ".
I received a message 'host process has stopped working "," image of task has been damaged or has been tampered with', and anothermessage that said something about another process has stopped working (it starts with ss; something), I received these messages for about 2 weeks, at least. Two messages later I get when I try to join another computer to my network. Also when I try to change discovery option is discovered the first message I get all the time. How can I fix it? Or what is caiusing this?
Hello
1. don't you make changes to your computer before the problem?
2 could you post back with the exact error messages?
I suggest that you follow these steps and check if the problem persists.
Step 1:
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
http://support.Microsoft.com/kb/940520
Step 2:
Put your computer in a clean boot state, and check if the problem is related to a software conflict of third parties.
http://support.Microsoft.com/kb/929135
Note: Restart your computer as usual by following step 7.
Step 3:
Also done SFC scan and check if the problem is related to missing or corrupt system files.
http://support.Microsoft.com/kb/929833
Tags: Windows
Similar Questions
-
My intelli mouse stopped working and what I get is "(32 Rudll) windows host process has stopped working" what's happened?
Hi Stevan I am,
1. for how long have you been faced with this problem?
2. did you of recent changes on the computer?
3 do you mean the computer crashes when you get the error?Method 1:
You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
b. type the following command and press ENTER:
sfc/scannow
A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
e. once the scan is finished, close the command prompt window, restart the computer and check.Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/929833Method 2:
You can perform a clean boot and check if you are facing the same question to the clean boot. To perform the clean boot follow step 1 mentioned in the article below, and then try again check in the clean boot state -
http://support.Microsoft.com/kb/929135
If the problem is resolved check which service is causing the problem; referring to article and following the other steps.
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:a. Click Start, type msconfig.exe in the start search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type your password, or click on continue.b. on the general tab, click the Normal startup option and then click OK.
c. When you are prompted to restart the computer, click on restart.
I hope this helps.
-
Host process has stopped working
I'm opening a small window saying that "Windows host process rundll32 has stopped working". When I hear this my mouse and keyboard stop working. Why I get this message and how do I stop it? I did the obvious things like changing the batteries and that did not work, but I don't know what else to do.
HelloWhat is rundll32.exe and why it works?
http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/What is the suspicious Rundll32.exe process?
http://WindowsXP.MVPs.org/Rundll32.htm-----------------------------------------------------
Try these to erase corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------
If no joy trying to determine what is the cause:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right
Click on taskbar - task manager - take a look at stored by - Services - process -.
It's a quick reference (if you have a small box left - show for all users, then
Check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see who are loading is method 2 - using MSCONFIG then after a
a list of these here.
--------------------------------------------------------------------Tools that should help you:
Objects of process Explorer - free - find out what files, registry keys and other processes
have open, which DLLs they have loaded and more. This exceptionally effective utility will be
even show you who owns each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured so that it starts automatically when your
system boots and you log in. Autoruns is also the full list of registry and files
locations where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded
automatically when Windows starts. For each request, the following information
appears: product Type of startup (registry/Startup folder), Command - Line String,
Name, file Version, company name, location in the registry or the file system and more.
It allows you to easily disable or remove unwanted programs that run in your Windows
startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not.
The window Watcher says it all, every window created by all programs that are running, the statement
If the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have a Lenove with Windows 7 Home Premium 64-bit of the system. Yesterday I got stuck in a loop while looking for a dog boarding on Google. I had to do a system shutdown to break out of the loop. Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem. I don't know that it will continue if I do not resolve what has caused the problem initially. Also, I went into the control panel one checked all the sound icons and they are all OK.
I'd appreciate if someone could give me some instructions on how to solve these problems. Thank you!!
Click on Start and open the Control PanelClick on System and select Advanced system settings in the left menu.Under performance, click settings.Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.Select the check box next to the program that you want to turn off DEP for and then click OK.For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet programThe Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)Select the check box next to the program that you want to turn off DEP for and then click OK.Restart the PC and use the IE32 againNote: You can not set DEP to 64 bit IE -
host process has stopped working for windows services
my host process for windows services has stopped working please could you find me a solution please
Hi joottley,
· Exactly when you receive the error message?
· Did you the latest changes on the computer?
I suggest you try the methods below and check if it helps.
Method 1: Put the computer in a clean boot State, and if the problem persists.
Note: After the clean boot troubleshooting, follow step 7 in the link provided to return the computer to a Normal startupmode.
Method 2: If the problem persists in safe mode, then check the observer after return with details and events for the cause.
What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
See the Microsoft article below and install them updated if the problem occurred after you download updates from Windows Updates.
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
-
Windows vista has been giving messages: window has recovered from unexpected shutdown down and showing process (rundddl32) also host windows stopped working. Internet Explore has been blocked or does not. Please tell us the solution-thanks
Hello
Thank you for your response.
I suggest you follow the steps from the link; It will help you solve the problem.
Method 1: An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer: http://support.microsoft.com/kb/940520
Method 2: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.
http://support.Microsoft.com/kb/929833
Method 3: If this is a recent problem, then you can try a system restore and check if it helps.
Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
To run the system restore, you can see the following link.
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
Please perform these steps provided recommended and post back if you still have the problem.
Hope this information is useful.
-
Windows Shell common Dll does not respond and the Windows Rundll32 host process has stopped working
I got two errors above and try to solve them without my success. My computer is slow, and several programs say "not responding" for a while until what they caught finally upward. It seems that I have a driver problem. Any advice?
Hello riondet,.
Thank you for using the Microsoft Windows Vista Forums.
How long did you receive these error messages? Did you change your operating system before thses errors? All new software/hardware installed or new Windows updates?
It seems that a dll is missing. You can fix it easily if you have a vista bootable disk. Just boot from the disk and click on repair your computer and then click on start option repair and it will do the rest.
or, if the problem is not resolved, then insert the vista dvd and then open the command prompt as administrator, and then run the following command...
C:\sfc scannow
and then press ENTER.
Please let us know status. Thank you! Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Host process has Sopped working and Windows will close the program...
I get errors on the host process has stopped working and will end the program... when I open Windows Media Center on my laptop Acer 6930 G. Also I get error messages whenever I lose a web page, IE Internet Explorer closes and the problem lies...
Hello
Try it it will help u.
http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/
-
Get the Error message host application has stopped working
What is a catalyst control center? I get a warning saying that my catalyst control centre: host application has stopped working. is it important, and should I re - download? If so where what to do?
Hello
The ATI Catalyst Control Center is a control application of 3D acceleration that allows you to control features of your graphics card. ATI Catalyst Control Center can be used to fine-tune your graphics settings, enable or disable connected display devices, and change the orientation of your desktop, etc. Many features show you a preview of your changes before applying them.
You can download from following link catalyst control center and check if the problem is solved or not.
http://support.AMD.com/us/pages/AMDSupportHub.aspx
Hope that helps.
-
Satellite L500D-144 - CCC of the host Application has stopped working
Ladies and gentlemen,
My PSLT6E - 007004GR is almost a year.
This month, there was an update - possibly to leave Microsoft - and since then popt always at startup in Windows 7 this window and look for solutions:
Catalyst Control Center. The host Application has stopped working, it is looking for a solution.A new installation of the driver graphics card and Catalyst Control Center has not changed. Instead, a standard Microsoft graphics card driver is installed.
Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
Is it reproducible.Have already reported more customers or I'm the first?
What can you do to the problem?
Sincerely,
CBluebaerchen
Hello
> Reset of the system for the month of October has also asked nothing, after fresh updates, the problem recurs.
To do this the display of Windows Update driver update?If so, restore the system to an earlier point and disable this update of the display driver and choose only the updates of Windows. That s enough.
Otherwise, you can try running CCleaner. It can clean and fix registry problems.
-
Want to m6: Catalyst Control Centre: host application has stopped working
Whenever I start my computer, I get the following message every time that a few months:
"Catalyst Control Centre: host application has stopped working".
A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
Please how can I get rid of this or get whatever the problem is solved?
Thank you.
Hello
Try to use Recovery Manager to reinstall your original graphic AMD software package - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.
After reinstalling, restart the laptop.
Kind regards
DP - K
-
Catalyst Control Center host Application has stopped working
I get this promt twice when I start the computer. I tried something that has been recommended who was clicking on tools in CCleaner and see if it was on the list that he was. I deleted it then as recommended but the guests still appear.
Check these related discussions
-
Catalyst Control Centre: host application has stopped working Windows xp prefessional
Catalyst Control Centre: host application has stopped working Windows xp prefessional. ididnt get what do that means.
Catalyst Control Center is a Radeon video card component. I recommend that you go into Add/Remove programs and uninstall. Once you have uninstalled it click HERE to download and enable the parser should automatically detect and install the appropriate driver. If the installation of the latest version does not resolve the problem, you should scan your computer for malware using Malwarebytes. Make sure that you update the parser prior to analysis.
-
Catalyst Control Centre: host application has stopped working
What does the error message ' Catalyst Control Centre: host application has stopped working "means and how to fix it?
Maybe it's the solution you're looking for.
Recently, I removed the malware recovery Vista of another of our mobile phones of the company Center. It installed ATI graphics card. This malware cache most of the files on the PC to try to trick into thinking that your PC is really damaged as he reports. Remove malware does not cancel the hidden aspects. In Vista, the folder of' your profile name (usually the owner) " c:\Users\ contains the subdirectory AppData required by the Catalyst Control Center to access in order to operate. If this directory is hidden, CCC cannot locate the files needed to launch. To resolve this problem, I use the following steps.
Go to c:\ and right-click on the users. Select Properties. On the general tab, look down to the hidden selection. If not, there is a box to tick in the box, place a check mark. Hit apply, select Yes to apply to all subdirectories. If you click ok, you may notice that he disappeared in the pane on the right, once it ends. It should always appear in the tree view on the left. Right click on it again. This time, remove the check mark and apply to all subdirectories. Once it's over, your files in the Users directory should reappear and Catalyst Control Center should function normally again. It worked in all cases that I have hitherto encounterd. I hope this works for you as well...
-
Catalyst Control Centre: host application has stopped working disk failure / hard
recently started to receive some ' catalyst control centre: host application has stopped working "or messages, usually, I get this message twice. When I started to get this message that I also had another saying of warning that there was an error with my drive hard as it had been corrupted, I think he said something as a "write-back" error message appeared, and I have since then lost most of my desktop icons, pictures, all my music files that I have composed and written , any word docs, etc.
I tried a virus scan first, defragged my hard drive and tried some system restore points and was able to recover some, not all, desktop icons and my experience, but that's all. all my files are gone, I don't know if it's two separate issues or both part of the same issue, but I would like any info or suggestions on how to get my files back. I've saved over 2 years worth of music that I wrote that I really need to come back! Thanks for all comments and advice
I just had the same thing happen. lost a lot of files. most is saved but we just moved and my backup HD are still packed. seems that there is a major conflict. check the file sizes in the main files, they are big like my files are there, but when I go down the root more that they are not and the file sizes in these folders don't add to the main folder above? I hope they are just invisible but recoverable. anyone with recommendations. I installed the mechanic system and my machine is stable again, but I get the error messages for the catalyst Center control and the dell support center. There may be a conflict between the 2 programs
Maybe you are looking for
-
Firefox is unbearably slow after update (/ questions/985969)
Firefox slows and raises my CPU at 100% after a few hours of use. This happened again and again after that I updated Firefox Versions 27, 28 and 29 now. If I restart my computer, Firefox works normally for a while before it slows down again. Same tex
-
Synchronize photos between devices
Hello world. I have two questions. I searched on the web and this forum for an answer, but I'm not really sure if the ones I found are good for me. I have a Macbook Pro, iPad, iPhone and iMac. I keep all my photos on the iMac (the "master computer"),
-
I would like to delete albums that are on my iphone. The 3 on the background of this photo. 2 of these albums that I have on my macbook, but I did not set to synchronize all albums from my iphone. All photos in this album of screenshot are deleted an
-
My Z10 was just updated to 10.3.1.1581 and I was wondering if it can, or more likely not, take a map of 128 GB, as did an iteration, in a distant past?
-
Hey how can guys, I get my channel checked?Please give me some info?