I am able to implement several personal dictionaries

Similar Questions

• Several "personal address book" in the Contacts

  As you can see from the screenshots, I have several "personal address book" in the Contacts. Right click on any address book of Contacts and remove it is gray. I have a gMail address book, a special group, I created and collected, too.

  So I have several abook.mab displaying in Windows Explorer; one is 56KO, others are 2kmb. If I move the files, they are recreated everytime I run the application of TB.

  It started when I restored a profile in a clean install of TB. How can I solve this further?

  No additional input or suggestion so I backed up my address book, uninstalled TB, reinstalled TB and imported the .csv backup. This solves the problem, as can be expected.

  Too bad, it was necessary that I had to create, download, and reset all.

• I used to be able to open several windows 'my computer' in the start menu, now the ONLY way I can do it is via "window button + e;

  original title: opening of several "MyMachine" from the start menu

  I used to be able to open several windows 'my computer' in the start menu, now the ONLY way I can do that is by "window button + e"-I have played around with nothing works folder options.  Any help is appreciated!

  Hi Candygirl777,

  You can try! http://www.TomsHardware.com/Forum/99994-45-open-multiple-computer-Windows

• Are blackBerry smartphones we able to create a personal hotspot on BB Bold 9700?

  Hello

  Are we able to create a personal hotspot on BB Bold 9700? If so, how do synchronize us then with an IPAD or Tablet? Thank you!

  Any phone with OS 7.1 + can create a Wi - Fi hotspot.  The Bold 9700 running OS 5 and cannot be upgraded to OS 7.1 due to material limitations, so no access point cannot be created on a 9700.

  I hope that helps you.

• I use Windows 7 and I am not able to print several different images on a single page.

  When I try to print photos from the 'My pictures' library, I use the following steps:

  1. turn the photo highlight

  2. click on 'print '.

  3. in the window that says: "How do you want to print your photos? I choose the number of photos I want per page, for example 3 x 5.

  4. when I try to add a picture DIFFERENT from my library so that I can print several different photos on this page of photos of 3 x 5, it simply replaces the previous photo. How can I get there?

  Thank you.

  Original title: I use Windows 7 and I am not able to print several different images on a single page. The answer posted here from 8/11 includes a link that does not work.

  Hello

  Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.

  What program you want to use?

  We will try to print in a different way and check.
   
  Open Paint and then do a collage of different photos then save it then open it in their program and print.
   

  To print the image in Microsoft Paint, steps to follow:

  a. Click Start, in the search box, type in the paint.

  b. open the document you want to print.

  c. select print and check.

   

  With the help of paint

  http://Windows.Microsoft.com/en-us/Windows7/using-paint

   
  Hope this information helps. Please reply back with the

• Creative cloud does support several personas?

  I have a creative cloud by labor account. I also want to do personal work at home with a separate set of shared libraries, etc. I guess that means I have to create a separate account of the creative cloud. It is fine, but what happens if I want to use a common (like my iPad) device for personal and professional projects? Will it connect constantly in and out of each CC account? Or, CC does support several personas so I can go back without logging in? Perhaps I could deal with logging in and out of a single device, but if I use several devices in my workflow (telephone, laptop, Tablet), it seem unrealistic.

  On a similar note, if I start a public Behance portfolio with my CC work account, lose access to it if I change jobs?

  -Steve

  If you use different accounts then you must sign the entry/exit to use each of them

• Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted.  I guess I'll have to move to Lr 6 but I"

  Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted.  I guess I'll have to move to Lr 6 but I am struggling to see online how to change the plan?

  I suppose you're running a 32-bit Windows version - if PS CC 2015 is available but LR CC 2015 is not.

  Help / System Info in LR 5 and look for Application Architecture and System Architecture a few lines down in the list of information.   Something with a 32 or x 86 is 32-bit.  Something with x 64 is 64-bit.

  You will need a 64 bit OS to run LR CC or LR 6.

• Meeting place 11 not be able to use iPhone Personal Hotspot

  We have several 11 7130 place devices that we evaluate before deciding if we want to buy for all remote users.  None of them were able to use an iPhone 5 Personal hotspot as a connection to the internet.  The hotspot indicates a connection available.  The Tablet connects. The hotspot indicates briefly as a fully connected. But trying to go to the Internet in Internet Explorer, you get the page not found.  Weather app of TheTablet says offline.  Anything that requires access to the internet will not work.  When you go to settings and look for the WifI, hotspot persnoal connection status says 'limited '.  The iPhone shows that Personal Hotspot has 1 connection.

  We tried several iPhones on several tablets and they do not work.  Is this a known issue?  I can't imagine being the only one with a problem like that, is not a defect in a single machine.  and a question like this would be a big obstacle to the acceptance of this tablet as a viable mobile device.

  Connection via Bluetooth to iPhone has the same problem as well, shows they are connected, but no internet access is available.

  It seems to be caused by a low-power wireless adapter.  The default settings on the place of the 11 sessions must be changed in Power Options.

  • Go to control panel > Power Options.
  • In the Power Options screen, click on the plan for the Dell Power Plan settings.
  • On the screen change Plan settings click on change advanced power settings.
  • In the advanced power settings screen, click on the + sign next to the wireless adapter settings.  Then the sign for the power saving Mode.  The battery is probably average energy saving.
  • Change for maximum Performance.  If the parameter Plugged In is not at maximum Performance, you must change this one as well.

  According to the power Plan that you are running, you may need to change the settings for the Power Saver Power Plan as well.  Same steps apply as noted above.

• How would I be able to implement a loop with this idea to my friends?

  -Very well, so I have a program which consists of a string and boolean operators, but also a number of structures of the case. In this program, I ask well enough the user various questions to identify what kind of manga they would like to. I added 5 genera, 5 manga and a synopsis for each of these manga. However, I still have to set up a loop in this program. I thought it was maybe I would start with a structure case asking what kind the reader prefers, then continue by creating a loop and inputing several manga for the user to read, but in a random order each time they run the program. Unfortuanetly, I'm not knowledgeable enough on the loops For to perform this task. Can someone give me advice on how to achieve this goal of mine?

  File with string and Boolean operators, and structures of the case is attached so that you have a Visual geometric what I was talking about at the beginning.

  No, it's not scalable. Imagine that you need to extend it to 100 question later. All of a sudden you have a pyramid of structure the size of the Egypt.

  Use a simple state machine and an array of issues. You can randomize the order by using established algorithms. (e.g.: use riffle to generate an array of indices and then rearrange the table accordingly using a small loop FOR.)

• VISA from read/write to serial port - unable to implements several orders of writing!

  Hello

  I'm new to Labview and I'm reading from a pressure through a virtual serial port USB sensor. I am able to read the port when you use HyperTerminal

  The code sequence that I should write to the port in order to obtain measurements using hyperterminal is the following:

  ' *' (2A hex)-online start and the responses of the port by asking 'Command', I should then enter

  FF-online measurement select the port must ask the 'mode', so I should enter

  0 has-online measurement of high resolution mode and it was then that I should start receiving action.

  The port is always answer by errors when I write the start command or the FF one. I tried to establish a sequence stacked to write the three commands then read the port, I added some delay between the three of them, but it does not work.

  Now I made really simple and removed the stacked sequence and just put the three commands one after the other and try to remedy not to not on the code.

  I'm really stuck at this point, could someone help me please? I read a lot fo articles on the forum, but I can't solve this problem

  Thank you

  I have attached my VI and the SCP1000 documentation (I can provide other versions of my demo if necessary)

  The reason for your problem is a frequent misunderstanding even among experienced programmers. Take a look at this thread

  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=417750

  In your data sheet, then they return codes like 0xFF or 0x0A so has a single byte of average value. Then you in your-active code constant writing FF\n is so this equal to values in format hexadecimal 46460A and your instrument do not understand. But it will include FF0A. In order to solve your problem, you would type in \FF\n in your '-' chain helped codes. Remember too, if you type in \32 it will be converted to character 2 this being 0 x 32 50 decimals and code ASCII 50 is equal 2

  Take the time and change the display format of string between '-' display and Hex display and you will see the difference

  Hope this helps

• TV Tuner card-is not able to implement the software.

  I have a HP m7747c Computer Media Center running Windows 7 (Vista upgrade) Home Premium.  It is several years old and I had to format the drive to reinstall Windows 7.  I have a Hauppauge HVR-1600 TV tuner that worked well before reinstallation of the card.  Now when I try to install Media Center once again, I said I need to insert the original of the tuner card installation CD.  I did receive an installation with the computer disc when I bought it.  Anyone know how to get around this problem.  I checked on the Hauppauge site and they show only driver and software updates.  I connected to Comcast's digital cable system using a decoder.  I have a feeling I'll have other problems once I have go of it, but it is another matter.  Any help would be greatly appreciated.

  bfleck5555,

  http://www.Hauppauge.com/site/support/support_hvr1600.html

  Note: This driver/application download contains all the drivers and applications needed to reinstall the
  WinTV-HVR-1600.

  Note: to use the WinTV-HVR-1600 with Windows Media Center application, you only need the WinTV-HVR driver.

  WinTV v7 for use with the WinTV-HVR-1600

  .

  WinTV v7 version 2.5 d installation package

  File name: wintv7_cd_2.5d.exe
  File size: 80.6 MB
  Date: 30/05/2012

  This download is a setup package complete, including drivers for the WinTV v7 application supported WinTV products and utilities.

  Installation notes:

  A valid WinTV application CD-ROM will be necessary to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during installation. If you do not have your original WinTV CD-ROM but keep updated WinTV v7, you can buy a new CD on the Hauppauge WebStore for $9.95

• BBM call several person cat

  Hello

  I have the difficullty to get it works as expected. When the following code is executed he calls a multi-person chat but completely ignores the pin codes I go to him (which are in my contacts) and I have to manually choose the contacts. Does anyone have ideas that I could hurt you please?

          bb::system::InvokeManager invokeManager;
          bb::system::InvokeRequest request;
  
          // Set the target app
          request.setTarget("sys.bbm.sharehandler");
  
          // Set the action that the target app should execute
          request.setAction("bb.action.BBMCONF");
  
          // Set the MIME type and the data
          request.setMimeType("vnd.bb.bbm/contactlist");
          request.setData(json);
  
          invokeManager.invoke(request);
  

  The json passed is a QByteArray: {"Conférence": {"contacts": [{"pin": "XXXXXXXX"}, {"pin": "YYYYYYYY"}]}}

  Thank you

  Check that the pins you go along are tiny.  I tried some of my old code example below, and it worked fine if I used all of the tiny pins.  If I had letters, I saw the behavior you mentioned.

     InvokeRequest request;
      request.setTarget("sys.bbm.conferencehandler");
      request.setAction("bb.action.BBMCONF");
      request.setMimeType("vnd.bb.bbm/contactlist");
  
      QVariantMap map;
      QVariantList contactList;
      QVariantMap contact1;
      contact1["pin"] = "removed";
  
      QVariantMap contact2;
      contact2["pin"] = "removed";
  
      contactList.append(contact1);
      contactList.append(contact2);
  
      map["contacts"] = contactList;
  
          QVariantMap root;
          root["conference"] = map;
          request.setData(bb::PpsObject::encode(root));
  
          InvokeManager invokeManager;
  
      InvokeTargetReply *reply = invokeManager.invoke(request);
  

• Not able to reach several customers 256 amendments

  Hello

  We must with the controller wireless CISCO 2125 with 8 amendments LWAP 1252, including AP get the IP address of windows DHCPserver (172.29.70.0/23), when clients reached 256 amendments to the controller, so also not able to join the wireless network.

  Class provider DHCP or user class will solve this problem. PL guide me.

  Thank you

  Knockaert

  Hi Karthik,

  the 2125 only supports max 256 clients. And anyway this amount of customers on 8 APs is already much too.

  Do you mean that no more customers can join after that? or no APs more can join the WLC?

  Nicolas

  ===

  Remember responses of the rate that you find useful

• On the desktop HP Pavilion p7-1110, are you able to adapt several drive HARD internal inside the case?

  I already know desktop HP has a problem where your were not able to adapt hard drives inside the it (something about a cage, picky HP or any other reason)...

  I went to Staples/Best Buy/Office Max/Office deport and no one seemed to know, I had a couple of even opening the case of the employee, and I see different areas (of 3 total), where it SEEMS that you can, there was even a LABEL that says HARD drive, so I suppose it's possible... but that's the point of sale , so before buying the office tomorrow, I want to confirm that you CAN hold at least 3 hard disks inside.

  Wouldn't buy and undergo a 15% restocking fee.

  Matt, welcome to the forum.

  Yes, there are berries of disc 2-5, 25 "and 2-3, 5" bays of drive.  Now, there may be other readers in some of them, but those that are vacant will hold a reader.  Here is the Product Specifications page for the computer.

  If your problem is solved, please click "accept as a Solution.

• I'm new to smart playlists and were able to implement simple. I can't understand how the rules to consolidate all my songs to cover of all my songs in a playlist.

  Smart playlist to group all covers of songs all the

  Are these songs marked somehow as blankets? For example, I add coverage to the tag group in Get Info. Then, it is trivial to create smart playlist with one or more rules.