I am able to scan from the scanner and printer, but can't seem to scan onto computor
I am able to scan from the scanner and printer, but can't seem to scan on computor, what I have to do.
Hello
I suggest you to update the latest drivers for the scanner\printer and check if it helps:
http://support.Microsoft.com/kb/283658
Also check out this link:
http://support.Microsoft.com/kb/323166
It will be useful.
Tags: Windows
Similar Questions
-
How to use windows scan with my new canon MX 922 printer. It is conncected and copying and printing but can't seem to use the windows scan option, the cannon that which for me is slow thanks
All in one, type printers (print, copy, scan) usually have a very specific set of instructions during the installation. If not followed exactly the probability is that the scanner will not work.
Canon: http://www.usa.canon.com/cusa/consumer
Download and read the Setup instructions for your model, have you followed the instructions exactly, more precisely when to connect the printer / scanner during installation of the software process?
J W Stuart: http://www.pagestart.com
-
I had to wipe my computer and thought that I had backed up my lightroom (lightroom 4). seems there is no back to the top and now I can't seem to re - install as the message catalog is not found. I can re - install?
Hi robbiemac1973,
You can reinstall the Lightroom app 4 from the following link:Download Photoshop Lightroom
However, you will need to start everything as a new catalog.
Kind regards
Tanuj
-
I am not able to connect to the main wifi network but can connect to the network of comments.
Hello
This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.
The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...
Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.
Wait a minute
Turn on the modem first and leave a few minutes, he managed by itself
Turn on the next device that is connected to a modem and leaves turn a good minute
Keep turn on devices one by one at a time, one minute apart, until the entire network is back
Recheck the network and report on your results
-
I was able to get the driver and the ut6ilize my HP Laser Jet 4 L printer. Since my hard drive had to be replaced, I was not able to get the LaserJe6t from HP again 4L printer driver. Help!
With the help of a very knowledgeable Microsoft Tech, I was able to get the driver for my printer HP LaserJet 4 L printer. It is listed on page 6 of 6 Iin the CATALOG.COM UPDATE from MICROSOFT.
Hope this helps others, I know that this quest for the pilot was long and painful, but my trusty printer prints well!
Good luck, Pat
-
That came with the laptop program I never used it until now.
Hello
Check with the system manufacturer's support, their documentation online and ask for their
Forums (if any) for known issues.=====================================
If supported these could help.
Hardware devices not detected or does not work - a Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsThe problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesSet up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-deviceThe problems with Bluetooth devices
http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspxHow to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connectionThe Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
as expected when you click on the element - for Windows 7 this check manually
http://support.Microsoft.com/kb/960531/en-usIf you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.
BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
devices around you. For each detected Bluetooth device, it displays the following information:
The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
Last detection time and more. BluetoothView can also warn when a new Bluetooth device
is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
http://www.NirSoft.NET/utils/bluetooth_viewer.htmlBluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
the standard output. For each Bluetooth device, the following information is displayed: MAC
Address, name, Major Device Type, minor device Type and possibly the name of the company of
the device (if the external file of MAC addresses - oui.txt is provided) - FREE
http://www.NirSoft.NET/utils/bluetoothcl.html---------------------------------------------------------------------
Add a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerAdd a Bluetooth device or other wireless or network device: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions---------------------------------------------------------------------
More information of possible interest to some:
What is a Bluetooth personal area network (PAN) network?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-PanConnect to a Bluetooth personal area network (PAN) network
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-PanI hope this helps.
-
I'm under ESXi 4.1 VM worked safely for 2 years now. Question today where 1 of the VM could not hit the internet more. When I try to change the framework within the OS on the connection, I get "an unexpected error has occurred" pop-up. All other virtual machines are great, I have deleted/added the adapter without change.
Don't know where to start troubleshooting this but need a quick fix as it's a prod box.
Thank you
Mike
Try this Microsoft KB article: error message when you open the connection properties: "an unexpected error has occurred" and if the article doesn't solve your problem, since the problem is on a damaged network adapter registry, I recommend you do the following:
1. stop the virtual machine and remove all the network adapter virtual;
2. open a command prompt and type: set devmgr_show_nonpresent_devices = 1 and then start devmgmt.msc
3. on the management of devices click on the view menu, click Show hidden devices.
4. search for Ghost network cards, select the ghost network card, do a right click and uninstall.
5. Add the new network adapter and set the IP address again.
-
Hello
I bougt garage a hp lodge 17, im not able to boot from the CD drive.
It comes with windows 8, and honestly I do not like it.
I want to start from the CD or for some reason im not able to do.
It comes to the laptop.
17.3 laptop HP Pavilion e079nr 17 inch
https://www.Amazon.com/GP/product/B00GGGIWTI/ref=oh_details_o05_s00_i00?ie=UTF8&PSC=1
I checked on the start menu and I just change
CD
hard drive.
...
...
...
even its not not booting to the CD
can you help me with this?
Hello:
Unfortunately, I do not know why the DVD player does not appear when you disable secure boot and turn on legacy mode.
-
Conflict between the scanner Epson Perfection 1260 Scanner and printer HL-2070N
My brother Hl-2070N printer disconnects after that I have used my Epson Perfection 1260 Scanner. If I clear all and close windows 7, I am able to print from the printer until I have to use the scanner. How can I solve this problem?
Hello
Thanks for posting your query in Microsoft Community.
You did changes to the computer before the show?
According to the description, it seems that you are facing problems with the printer as it goes offline and print normal until you restart. I'll be happy to help you with this problem.
You can try the following methods and check if they help:Method 1: I suggest you run the Microsoft Fixit from the link and.Diagnose and automatically fix problems printing and printer
http://support.Microsoft.com/mats/printing_problems/en-usMethod 2: You can try following the steps in the link and check if it helps:The new status of the printer is "offline" when you delete a print queue
then restart a Windows computerhttp://support.Microsoft.com/kb/2027593
In addition, refer
The State of the printer is offline or paused. (For Windows®)
http://support.brother.com/g/b/faqend.aspx?c=CA&lang=en&prod=hl2070n_all&faqid=faq00002646_000
Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
-
Windows 7. Cannot download the software of the Scanner to printer Epson XP-305.
Lived Epson who have now been suggested to try to get help from Microsoft. Printing software download, after about 18 seconds, he returned with "Unable to launch the required program", it continues to download and then install the software. All works o/k set apart from the scanner. It then says not downloaded the scanning software.
Hello again,
I found a driver separated for the scanner for XP - 300 - perhaps your printer family (there is just no XP - 305 not listed on the Epson site). Go to the download site for the XP-300 printer, let it detect your OS and bypass the driver combo. Open the tab drivers (click on it) and the latest driver listed for the scanner and the utility scan.
Assuming it is the same family of AIO printer, the process of this page: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Overview&oid=201985 .
Let me know if this solves the problem for you.
Kind regards
BearPup
-
is - it version XP from Microsoft scanner and Camera Wizard work on Win 7?
original title: the version XP from Microsoft scanner and Camera Wizard work on Win 7? It is much more useful to manage his photos. The version of Win 7 does not even recognize the camera.
I don't know what else to say. I have an old XP machine, so I used that. Child's play for what I wanted to do.
Thank you for volunteering J, for this quick reply.
My question gets pictures from a camera to a PC, my problem is that the XP version is very useful, and the version of Win 7 is not.
Where the question: can I use the XP version on Windows 7?
Concerning
John
=====================================
You are welcome.Sorry for this misunderstanding.
You have said that your camera is not recognized then
I assumed that you were unable to download your photos...Anyway... as far as I know... the XP Scanner and camera
Wizard cannot be used on Windows 7.The info can be useful to experiment.
Windows XP scanner and Camera Wizard is:
wiaacmgr.exe
On a Windows XP system, the path to the file is:
C:\Windows\System32\wiaacmgr.exe
There is also a copy of the file located in the:
C:\WINDOWS\system32\dllcache\wiaacmgr.exe
I wonder what would happen (if there is one) if the
wiaacmgr.exe file has been copied from the XP system
and transferred to the Win 7 system?If you decide to experiment with the wiaacmgr.exe file...
Proceed at your own risk *.
On a XP system if a scanner or camera is connected
and turned on... you can left-click the wiaacmgr.exe
file (even if it is copied on the desktop) and it allows to detect
the device.Will it work if copied on the Windows 7 Desktop? I have no idea...
-
Prefer the scanner and Camera Wizard in Windows XP on Vista
I searched the web on this and found that there are a lot many people like me who like the scanner and Windows XP Camera Wizard to import pictures better than vista. However I have not yet found a solution on the web for this. I have 4 boys and like to put their photos in individual folders marked after each of them. I can't do this in vista, and I can't do that in Windows live photo gallery. The scanner and made XP Camera Wizard is very easy to do. Does anyone know of a solution to this or a 3rd party app that does the same thing?
sssuperd,
If you can navigate to the photos inside the unit through 'My Computer' then you can select the 50 photos that you need to highlight the images then 'Right click' on a highlighted area and select "cut"(en sélectionnant"Couper"les fichiers que vous avez sélectionnés seront effacées de l'appareil photo dès qu'ils sont fait copier vers la destination que vous avez sélectionné). "» You can now open the folder you want the images and right click and select "Paste". I will list the order the steps below.
Step 1. Connect the camera to the computer.
Step 2. Open "Computer".
Step 3. Double-click on the camera.
Step 4. Go to the images you want to transfer.
Step 5. Select or highlight the photos you want to transfer.
Step 6. Right-click on one of the pictures that was selected and select "cut"(si vous voulez ces images à supprimer de la caméra après transfert) or "Copy" (if you don't want these photos to remove from the camera after transfer). "."
Step 7. Open the folder that you want to make these files transferred to and right-click on an open area and select 'paste '.
Please let us know if you will have more questions.
Thank you
Carlos
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When you use Adobe Acrobat Pro DC, how do I convert my PDF to Excel and have it include the header and footer from the original PDF? I can convert all information of an organization but the footer and header with no discharge in the excel worksheet.
Hi trudyb54940538,
Converting PDF file to sheet Excel spread, header & foot is not included. I am able to reproduce the problem at my end.
Thanks for reporting the issue.
Kind regards
Nicos -
My incoming e-mails shows all information tracking (which was previously hidden) on the screen and print emails. If I send an email tracking information included in the email sent. If I reply to an e-mail message, the information is not displayed (pictured) on the email. We have not been able to find a way to hide this information as it was in the past and to our other users.
The menu bar, select View-Headers-Normal
No menu bar? Press the ALT key.
-
Is it possible to remove pictures/videos from the iphone and have yet to back them up in the iCloud?
At the moment the iCloud synchronizes only with what is already on my iPhone.
This article should help you remove photos from my photo - Apple Support stream
Maybe you are looking for
-
DeskJet 3050 a: Cloud said e-mail address incorrect printer
I have a 3050 has connected to my main desktop via the printer cable, it is ALSO hooked up to my router, so we can print wireless with our notebook computers. Our old laptops were WIndows 7. I just bought 2 new Chromebooks for Christmas. When I try
-
My Satellite closing with blue screen
When I tried to turn off my computer 10 hours ago it took a long time, I pressed the characteristic "ctrl-alt-delete" but that doesn't seem to help. He was finally assigned through the ritual of saying "windows disconnects" but then I found myself wi
-
Lean how to run the stop code when the highest level VI ends
Hi people. I am a newbie of LV with 30 years of experience in embedded SW engineering. I searched for how to run the stop code when a VI of highest level ends. I found many examples, but they are horribly complicated. A little birdie told me that
-
I know this is going crazy, but I really like the old windows 95 startup sound. Now, I downloaded a sound mp3 in windows 95. I don't know how to change to a .wav file, I think that it is what I have to do in order to put the sound in my sounds of w
-
I would like to delete the new window 10, I'll be happy to have my window 7 back.
Original title: return to old I would like to delete the new window 10 on my laptop. Once I did the research where and how, there no trace I can restored back. Also, most of the new system running on 8 GB of RAM and I use 6 GB Rams; and I think that