I am Admin on my PC, but cannot change the display settings.

Similar Questions

• You cannot change the display settings on the reference monitor

  I'm unable to change the display setting in the reference monitor.  right mow my only options are composite video and alpha.

  What do you want to take it?

  If you are referring to the scopes. They no longer exist.

  Now, its Lumetri: work/Lumetri extended space.

• Cannot change the BIOS settings

  Hi all, I hope someone can advise on this? I have a HP Pro X 2 612 G1that I am unable to change the BIOS settings on. I can access the BIOS, but the options are grayed out. I have updated the BIOS to the latest version without the determination of the question. Any information is appreciated.  Thank you...

  Hi, I have found the BIOS can not be change, unless an administrator password is set for the BIOS for a system used at home I have never set a BIOS password and think it should be owners choice but that I'm just a grain of sand in this big world! Thank you all

• Satellite NB10T: Want to install Win 7 but cannot change the UEFI in MSC mode

  Hello

  I know that it isn't the best article at the post office, but there is no instance void for my computer (Satellite NB10T) series and this problem is bound to win 8
  I'm stuck at the moment: I disentailed 8 victory because I want to go back to 7

  I am aware of
  http://APS2.toshiba-tro.de/KB0/TSB2C03F80002R01.htm
  The problem is that I did not mode Boot under advanced system configuration option; the only thing I can do is enable or disable secure under the Security tab, startup mode which isn't enough

  I also added a supervisor password. It adds a clear keys for secure boot option, but still nothing on the Advanced tab to move to the Csm.
  Clearing keys does not work too.

  I tried to boot multiple linux distro and win7 on usb bootable (theses work on other computers), but no luck. Boot order usb first value of course).
  What can I do?

  Edit: will put some pictures of the uefi

  You posted the screenshots of the configuration of Toshiba utility.
  The boot mode must be changed in the BIOS settings.

  To access the BIOS of the laptop must be turned off.
  Then put the unit BUTTON and press F2 to enter the BIOS.

  In the BIOS, you will find the necessary options: secure boot must be disabled and the UEFI mode must be changed to MSC mode

• The user account name has changed, but cannot change the logon name

  I am running Windows XP Professional and have supported a computer that uses a former employee.  I changed the name of the user account in my name, but it still shows the old username when I start the computer.  How can I change this?

  Hello, CYLC

  If you are on a domain, it can be disabled via Group Policy. Check with your network administrator.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Open the new browser works, but cannot change the cursor to reflect that it is clickable

  Here is the link to my site - www.localwally.com/napatest3
  
  I wanted to make all the pictures on the clickable site for a larger image - but I didn't have to create separate Web pages for each of them. And I went to the BEHAVIORS added "Open the browser click" - it works, but I can't find a way to change the cursor to the arrow by hand to show people that this is a clickable link. Here is the code below - any ideas? Don't you worry that when you click on it it does not return a pic. I didn't upload them for this test. You should get the new browser without content inside.
  
  Also, I would love to add a caption to the photo, but does not know who is!
  
  Thanks for your help - Gary
  
  
  "< td width ="419"height ="318"> < div align ="left"> < span class ="style25' ondblclick = "MM_swapImage ('Image1 '", 'reynoldsfamily_800.jpg', 1) "> < img src ="Renolds_400.jpg"width ="400"height ="300"id ="Image1"onclick =" MM_openBrWindow ('reynoldsfamily_1000.jpg', 'ReynoldsFamily ',' width = 1000, height = 70 0') "/ > < br / >
  Sipping a chard at Reynolds Family Winery, a beautiful look on the Silverado Trail < / span >

  > Is there an easy way to create this code in other
  > that cut and paste?

  Learn the HTML is the most important thing you can do if you are serious
  on the use of DW.

  There is an easy way to do it-

  * Select the image that triggers the behavior
  * Enter it ' # ' in the field of the property inspector link
  * When you tab off the field link, you should see appear on the
  Tag (at the bottom of the document pane) selector
  * Click the tag in the tag selector and apply the behavior

  That you will get 90% of the way. There are two additional things you
  can do after that-

  1 copy the link in the image you pop up and paste it instead of
  the "#", you added to the link field
  2. Add '; return false;' at the end of the behavior

  I believe that David Powers has an extension called "Smart Link" that will do
  These for you two. Google it...

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "garynng" wrote in message
  News:g3h10m$OIJ$1@forums. Macromedia.com...
  > Thanks - a follow-up question - y at - it an easy way to create this code
  > other
  > that cut and paste? I have a lot of pictures on other pages
  > and
  > need an easy way to do it. I created the original code by clicking on
  > the
  > Option of behaviors on the right side of DW.
  >
  > Really, thanks for your help. My daughter told me about using DW versus
  > coding myself the old-fashioned way and I'm happy she did, but it's a bear
  > try to learn this stuff!
  >

• Sound problems on computer, cannot change the sound settings

  I had a long-standing problem in the audio settings of the Control Panel on Windows 7 where I can't change settings, configure anything or especially toggle of the devices. The options are there, but they have no effect when selected. Recently, I tried to connect my laptop to a TV, and as I could not set as the default audio device, I finally decided to try to fix things. I deleted and reinstalled the software Realtek my laptop and everything he has done is completely turn off my speakers, and all attempts to reactivate failed them. The unit displays in the control panel as a default active device, but claims of the taskbar that there are no speakers is connected, and if I click to set up the Realtek Audio, I have the same situation that before where absolutely nothing is happening.

  I tried troubleshooting sound problems, and all I get is the statement that an audio device is disabled, no attempt to fix or any option to enable. Apart from a system restore, that in general, I try to avoid, I feel that I have tried everything I can think of to fix this and only managed to make it worse. No help available would be appreciated to receive my laptop back to a functioning State.

  Model is a fickle Dell XPS L501X, if this is any help.

  I tried both of these methods several times without success, but since I found a result to this problem online. (Here: http://www.techsupportforum.com/forums/f217/solved-no-sound-the-unsolvable-problem-take-the-challenge-594113.html)

  I will stick also the solution here should someone stumbles on this page in the future trying to solve the same problem:

  Hi, go to start search and type cmd search will return the click right on cmd.exe and select "run as Administrator" at the prompt, type: -.

  net localgroup administrators / add networkservice
  Press enter, and then type:
  net localgroup administrators / add localservice
  Press enter, and then type:
  output
  Press enter, and then restart your computer

  Thanks for the help though, Yann!

• The key and the shortcuts work but cannot see the display on the monitor

  the function keys

  As soon as you turn on press F8 repeatadly, eventually the safe mode options menu should appear, select Security with networking, it doesn't then continue successfully (ie the screen visible)?

  This problem occurred after you update or install something? If so, disconnect any connected device and see if you can use the system restore for a period prior to the problem.

• Cannot change the print settings

  I have a new printer, an Epson XP 430. My previous printer was also an Epson. With my old printer, when I chose to print (for a document, web page, etc.) the dialog always had an option to choose, black and white. I also could add to the presets and edit presets.

  With this printer, I can see the presets, but I can't make changes. When I click on view Presets, it is not an option for adding a new preset as it was with my old printer and remove and duplicate boxes are grayed out.

  I guess that this is due to the printer, not OS X, as I noticed the difference when I started using the new printer. Am I missing something somewhere? I rarely print in color, so I would have a preset that specifies black & white.

  Thank you.

  Sheri

  Since you have a new printer, you can create new presets. This is done through the printer with the selected printer dialog box, not through the page view Presets. When you select this option to print do the settings that you want to create a preset for and then click on the drop down preset menu. Select "Save current settings as preset" and enter a name for the new preset.

• LaserJet MFP M277 PLC6: Cannot change the color settings, specifically in the category of graphs

  I need help on how to change the color for printer settings. I am unable to print graphics on forms, they come out as a solid black box. When I go into the color options I'm completely unable to change, there is no options to change anything: it only shows as neutral gray and black graphics.

  The printer has been the subject of assessment, and there are no exceptions to this topic. Please help.

  Your question is usually a driver problem.  Try to use pcl5 or postscript driver to see if one of them makes a difference.

• HP Folio 13 has password administrator (cannot change the bios settings)

  Im trying to change the boot order to USB key and it gives me "system disabled 76799886. Is it possible to boot usb or should I scrap it? Help, please

  Hello

  Try to enter: 69691208

  Kind regards

  DP - K

• Cannot find the display settings to change the background.

  
  

  • Windows Vista
  • Receives the following message appears: "your system administrator has disabled launching of the display settings control panel."
  • Have not made any changes to the mu computer
  • I tried to find it, and I can't find where to remove this restriction.

  Try the link below:

  Your administrator system off the Panel control is displayed - PC troubleshooting help tips

  http://www.onlinecomputertips.com/troubleshooting/display_error.html

  I hope I could help

• Cannot change the screensaver settings

  Original title: __Locked (in gray) screen saver settings___

  Hello

  I just changed a new laptop with win 7. I have a little problem with screen saver which is defined in the field of sleep on white screen, set to 15 minutes and requires the password. Everything is more gray, so I have no possibility to change that.

  Can someone help me to unlock the screen saver settings (remove the grey shadow) so that I can customize my screen saver?

  Thank you

  Hi Baracus,
   
  1. are you able to click on the dropdown under screen saver?
  2 or it is dimmed as well?

   

  If this isn't the case, then select a different screen saver and try to change the settings.

   

  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

   

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows 8, cannot get the display settings and the password for work

  I tried to change the timming 'turn off display' and "ask password on wake up" (fixed or not) to perform settings.  Whenever I stop using the computer a few seconds later, he goes to the locked screen.  The computer was a display at Costco, so maybe they had set it up so that people can not change the settings...

  My problem has been resolved by the activation of the screen saver after minutes 356789

• This folder is located in the windows folder: $NtUninstallKB36574$ It is not available and you cannot change the security settings.

  This folder is located in the windows folder: $NtUninstallKB36574$
  It is not accessible.  I can't change the security settings.
  It is the remains of an outbreak of the virus.
  I saw that on 2 client computers this course last 6 months.
  So, how is it possible for an inaccessible folder to administrators?
  How can I change the security settings to remove.
  After you run several virus cleaners, I'm pretty sure that the virus has disappeared.
  Ideas?

  You should be able to remove it from the command prompt in Windows Repair Mode.