I am connected but centre network and sharing Center says im not. It shows no connection available, even if I am logged in? Photo included (win 7 pro64)

Similar Questions

• Windows Vista connected online but not shown on network and sharing Center or on the taskbar, leads to other problems

  I have a Dell Inspiron 1520 running on Windows Vista, my router modem is a Motorola SURFboard SBG901. A few months ago on this computer, I couldn't see that I was connected online either from right down icon in my taskbar (it shows just two monitors with an 'x', that when you highlight on he says "not connected, you are currently not connected to any network.")  I don't see it on my network and sharing Center which States: "not connected wireless connections are available." In terms of network it shows that my PC and then the line that has an x on him. If you click the x, or select diagnose and repair, he informs me that all is going well with my computer. If I go to connect to a wireless network, it shows that I'm connected to my network ready. I open one of my browsers and they all work very well, I can access any site without problem. I was not embarrassed with him at the time, but since then I moved into a new House and have a new service and everything, with this motorola modem cable. my new wireless network is a network unsecured, which of course, I want to fix it. I can connect to this network, but I can't access it through Windows properties to make sure. I read the manual of the modem, telling me to connect through an ethernet connection and access configuration manager using the ip address of my router on a browser, but which does not charge or the other. I have other devices (Ipod Touch and PS3) wireless I got other people come computers and they all detect the network but cannot connect to it. Thanks for any help.

  Hello
   
   
  I would like to ask you a few more things.
  1. how many network connections you have created?
  2. are there multiple NICs installed on the computer?
   
   
  Since this is a common problem and many users have solved this problem by using different methods.
   
  This can also occur if you frequently use several type of internet connections such as dial-up, Ethernet and LAN.
   
  As the article below also indicates that there could be multiple reasons for the same.
  The network adapter icon incorrectly displays a red "X" in the window management in Windows Vista network connections when the network adapter is connected
  http://support.Microsoft.com/kb/945925
   
   
  Method 1.
  I ask you to remove any network connection if you have created and then check.
   
   
  Method 2.
  For control please check in mode safe mode with Networking if the problem exists.
  Here's how:

  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows 7 with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Troubleshooting in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode
   
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Network and sharing Center shows not connected, but the computer is connected to the wireless network

  When I open the network and sharing Center, or hold my mouse pointer on the icon of internet connection in the bottom right of the taskbar, it shows that I'm not connected to a network. However, I know that I'm connected to the internet. My internet and e-mail work correctly. Also, when I click on the 'Connect to a network' option, find the list of available wireless networks, and it shows that I'm connected to my home network. How can I make Windows everywhere where I am connected to the internet, instead of recognizing only on the list of the networks without wire-available?

  Had exactly the same problem on Windows 7 (win7). Connected to the Internet but the status showing no connection and a red cross on the network icon. Problem has also caused problems to connect to Lync and Office365 along with VPN, which apparently uses the status to check whether the connection is available.

  Found the solution here: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/df17c593-e78f-4878-97b0-7569307934c5

  Apparently, certain permissions gets hurt in the database record and must be fixed using RegEdit. The solution is a step by step and likely to be resolved simply by removing a cache of file using RegEdit and potentially affecting certain permissions.

  It will be useful.

• Problem with wireless - Vista Network and Sharing Center does not recognize my connection!

  I use the Home Visa software and my network and sharing Center does not recognize my connection but I can access the internet without any problem. Previously, I was using a wireless router Linksys with an old box of AT & T internet with no problems. The problems started after I updated my AT & T internet box that made obsolete the linksys router and now the network share does not connect. I just have the problem of getting the network and sharing device recognizing that I am actually connected to a wireless network. I can't use my printer or share files with other people. I can't get my wireless printer to work if I restart my computer and I have the documents I want printed already sent to the printer. My network and sharing Center also works very well for a few seconds when I start my computer then it turns off again.

  Hello

  Method 1:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  You can also view the related items for more information.
  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Method 3:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  See also:

  Connect to a network with Windows Vista wireless

  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx

• How can I connect to the internet? Problems involving the network and sharing Center does not.

  Hello.
  I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
  The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
  The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
  • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.

  • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.

  • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.

  • I also updated the connection of the range extender.

  Why the network and sharing Center will not be open to the top?
  How can I configure my router my HP Windows Vista Linksys connection?
  Thank you.  Please let me know if you need more information.

  Thanks for your reply.

  In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
  In this case, the manual connection helped solved the problem.

• How to activate the Internet connection on the network and sharing Center.

  

  I clicked on disable when I opened it. I tried to find a solution to this, but I can't find anywhere on the web. Please, help me difficulty find my internet connection. I'd really appreciate it. It's windows 7.

  OT: I accidentally disabled the internet connection by going to network and sharing Center

  Thank you.

  Hello
  I suggest you to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also the link: wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results after trying the steps above.

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Centre network and sharing that network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything

  just noticed on my network and sharing center that the network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything thank you.

  If you do not share with another PC or XBOX Media Center, then your file and media sharing must be turned off.

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Network and sharing Center (no answer)

  I have been using Vista Home Premium on a laptop Toshiba Satellite. I remember not exactly since when, but lately when I opened the icon ' currently logged in ': l to the taskbar and click on it and open CONNECTIONS current or CONNECT or DISCONNECT or NETWORK AND SHARING CENTER, it freezes: changement. t gave me a lot of problems... Please help... I tried Googling through and used commands like:

  1. net localgroup "Administrators'"NT Authority\Local Service"/ Add

  2. to turn off the automatic setting:
  Run as administrator command prompt.
  Type: "netsh interface tcp set global autotuninglevel = disabled" (without the quotes) and press ENTER.

  You may also need to run this command:
  netsh interface tcp set global rss = off

  To activate the auto adjustment:
  Type: "netsh interface tcp set global autotuninglevel = normal" (without the quotes) and press ENTER.

  To view the current TCP settings:
  Type: press and "netsh interface tcp show global" (without the quotes) to enter.

  I don't even know what they asked me to do, if it is correct or not, but I did and still no solution...: s: s: s

  Any yelp would be appreciated!

  Beppe!

  Nothing is perfect!... .but it should work!

  B3PPE,

  See that article following (http://support.microsoft.com/kb/929833) if it can help you to manually replace the files that SFC could not fix, it also gives you measurements on log file filtering so that only unsuccessful repairs of SFC are listed. Please note that the best source for replacement files would be a sound installation of vista with the functions you want to work.

  I will add to check your hard disk for errors, as corruption SFC could be linked to it. For details, see check your drive for errors .

  Our final recommended option for the problem that you encounter will be a Vista repair install:

  <><><><><><><><><><><><><><>

  You can reinstall your copy of Vista while keeping your files, settings and programs by performing a repair install or a level facility.

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now.

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license.

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note: If your installation disc doesn't include SP1, and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates, then select Service Pack for Microsoft Windows and click on Uninstall.

  <><><><><><><><><><><><>

  It is always advisable to backup any and all important data before continuing with the major changes to your system. Please see: methods for backing up your files.

  Always make sure that you have the means to reinstall your programs, or by an installation disc or access to the installation files.

  <><><><><><><><><><><><><><>

  Only a clean installation may shrink toward the low enough differences to isolate what causes this scenario. There are already has with your file system corruptions, we can't go until this is completely isolated. Please let us know if a reinstallation of your operating system is an option for you at this point.

  <><><><><><><><><><><><>

  Report your results so that we can help you. Please use the community support for Microsoft Vista.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network and sharing Center could not load the

  Questions:
  -Network and Sharing Center: Page failed to load
  -Unable to connect to internet, but says that it is connected to a network (have three PCs in net)
  -Guest of the continuous window - "problems and reports no longer."
  -By opening system in Control Panel, said the "Installer could not load display.

  It's the question driving me crazy... Anyone had this problem before?

  Hi kyungturner,

  Please use the forum for Support of Vista,

  You have anything installed recently? It sounds like the system could have a corruption.  Save all your data prior to perform a clean boot to further diagnose the problem:

  http://support.Microsoft.com/kb/929135

  If the clean boot does not work, try a SFC scan to repair system files:

  http://support.Microsoft.com/kb/936212/

  Let us know if this helps solve the problem, Kevin
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Center network and sharing Center shows "Page failed to load".

  On Windows Vista, Network and Sharing Center comes with a blank page except for text in the middle and says 'The Page impossible to load' steps, I tried:

  Clean boot

  SFC/scannow

  CHKDSK /r

  System Restore (has not only once other succeeded, but does not solve the problem)

  None of them have worked. I have reviewed the SFC newspaper and looked at DLL files, it says could not be fixed and replaced those with well known copies.

  A clean install is not a good option in this case either. My thoughts are that it is a corrupt DLL somewhere or a DLL that has incorrect permissions.

  On another note, I can't connect to wireless networks either. To be more exact, no networks appear in the list (I can connect by typing the SSID manually. The pop-up icon wireless in the status bar indicates "networks are available", but the list shows no. I believe that these two issues are related. Please give suggestions and connents, I appreciate all help.

  Thank you.

  Hello
   
  Do you remember any change to your computer before the problem?
   
  Search for related errors and Event Viewer .

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  You can uninstall the drivers for the network adapters in the Device Manager and reinstall the same.

  To uninstall the wireless device manager,

  1. click on Start , type Device Manager in the start search box and press ENTER.

  2 locate the network adapters and expand the same.

  3. Select the adapter, right click and selectUninstall.

  4 restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  Note: Before uninstalling the drivers from Device Manager, make sure that you have a backup installation files.

  Step 2:

  A. If not help, to create a new user account and check if the problem persists.

  B. Si the problem is resolved in a new user profile, then probably you had a corrupted profile and can be remedied .

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• No network adapter is displayed in the network and sharing Center

  My internet connection works very well through a router, but if I go to the network and sharing Center and click on change adapter settings, I get a blank page.
  The adapter appears in Device Manager and it is used by the computer as disabling it kills the internet connection.
  I think that's the reason that I have a network with a red X icon. The ToolTip that appears when the mouse passes over the icon said access to the Internet.
  What would cause the network to do not "see" the adapter, even if it's to use?
  The adapter is a Netgear GA311 gigabit and compatibile with Windows 7.

  Have you installed the drivers of www.netgear.com?

• Unknown error in the network and sharing Center

  When I opened my network and sharing Center where the active networks would be just said

  'Unknown '.

  and

  "The account specified for this service is different from the account specified for other services running in the same process"

  If I open Services.msc and check the list of networks and Network Location Awareness service, both are on automatic and both connect as a network Service.

  Network list service does not work and does not give the error:

  Error 1079: The account specified for this service is different from the account specified for other services running in the same process

  I'm connected to my home network and have internet access and also a local access to other computers, it's just not appearing is not on the network and sharing Center.

  A result of this is that some of the metro apps don't report any internet connection and will not start. I currently now disconnected my microsoft account on the computer and use a local account, but the problem is still there.

  I also tried

  netsh winsock reset

  from an administrator command prompt but no change.

  Can anyone help?

  Hi Andrea,

  Please keep us updated.

  This can be shown because of missing or corrupted system files. This is why I would recommend running the System File Checker tool, which is a Windows utility that allows users to find corruptions in Windows system files and restore corrupted files.

  To do this, click Start, type command or cmd prompt in the Search box, right click invite, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  At the command prompt, type the following command and press ENTER:

  sfc/scannow

  Note: Do not close the command prompt window until the audit is completed 100%. The results of the analysis will be posted when this process is complete.

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.