I am connected to a public wi fi neywork and my reception is 'Good' but I got error messages indicating that I lost my connection on the site I was working on that.
???????
Hello
1. is the issue limited while accessing any particular Web site?
2. are you able to connect to the network after receiving this error message?
This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
To disable authentication IEEE 802. 1 X, follow these steps:
a. Click Start, type ncpa.cpl, and then press ENTER.
b. right click on your wireless network connection, then click Properties.
c. click the wireless networks tab.
d. under preferred networks, click your wireless network, and then click Properties.
e. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.
Refer to the steps in the following Microsoft article.
Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-us/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1
Keep us updated on the status of the issue.
Tags: Windows
Similar Questions
-
The error occurs with updates for Bridge CS5, Extension Manager CS5, Photoshop CS5, and Photoshop Camera Raw updates. I tried to run the update multiple times and it appears to download updates and then fails with the message above. Internet connection is OK. Does anyone have any ideas as to why this could happen?
The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
I have a side bar to the right of the office, the problem is, whenever I try to click on an icon on the toolbar at the bottom, a vertical translulent [box, rectangle, border?] appears in the sidebar and the items on the toolbar at the bottom, me disabling click on the items on the toolbar. Is it possible to resize or remove the [box, rectangle, border?]?
ALSO, whenever I log in, I get an error message indicating that google desktop did not start correctly. but I have not found a solution to this problem. can someone help me?
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the Progam below to remove annoying boot for her entry to the problem of Google:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
help and support does not work
When I select Help and support icon, I get an error message indicating that the feature could not start.
I use a Vista 32 bits on a HP computer operating system model number m8300f.
In addition, I bought a copy of Win 7, but who could not load freezing during installation.
Hello
Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.
1. open the start menu, click programs principally made, select accessories.
2. right click on command prompt, and then click "run as administrator ".
3. type the following commands in the DOS prompt window and press ENTER at the end
of each line:REGSVR32 MSXML3. DLL/U
REGSVR32 MSXML3. DLL
REGSVR32 MSXML6. DLL/U
REGSVR32 MSXML6. DLL(At the elevated command prompt command should not give us any error).
Restart the computer and try to access help and Support.
For the problem of installation of windows 7.
We would like to get more information about you to help solve your problem. You better, please answer the following questions.
1. How did you start the installation process?
2. you perform a new installation or an upgrade?
3. what type of drive you are using for installation?
4. at what stage of the installation has it stopped?
5. have you received an error message?
First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.
If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.
Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.
Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.
Installing and reinstalling Windows
http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows
-
original title: trial version of Streets and Trips
I downloaded streets and trips 2011 version of track, but it will not install. I get an error message indicating that Microsoft Visual C++ 2010 Redistributable must be installed. It has been installed and then I get another error message saying "one of the prerequisite components failed to install. Implemented now will end "what can I do to start the installation of Streets and Trips?Hello
Which edition of Windows are you using?
Example of Windows 7 ultimate 64-bit.
Please follow the steps mentioned below to help solve the problem.
Method 1
a. perform a clean boot
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 to put the computers start to Normal upward departure mode once you have completed all troubleshooting.
The article above applies to Windows Vista and Windows 7.
b. now, try to install the game and check if it helps.
If the problem persists then please continue to,.
Method 2
Error message when you install a Microsoft game or a mapping program
http://support.Microsoft.com/kb/258496
Method 3
You receive an error message on the required components, Error 1316 or error 1722 when you try to install Streets and Trips
http://support.Microsoft.com/kb/254435
The article above applies to the versions of Streets & trips
You can also post your request in the forum Street and the TRIPS Agreement.
Hope this information helps.
-
I tried to uninstall a program under Vista 32 SP2 and received an error message indicating that WIndows Installer is not accessible, as it is not in service. What happened, I used to have because I was install/UN-installing for quite a while. Help, please?
Thank you
Please stand out my answers as answers.
Sorry, I could not solve your problems.
Someone else will have different ideas to set your.
See you soon.
-
I started getting an error message indicating that I was no longer my quota, please reconfigure my settings, I do not know what settings must be reconfigured after a few days or weeks? I tried to sign on MSN.com and I am not even able to make the sign on screen, when I click on the logo of msn that it goes straight to windows is checking for a solution to the problem, then he's going I'll be notifyed as soon as it is detected a problem caused the blocking of the work program and windows will stop the program. Any help?
Support MSN:
http://support.Microsoft.com/kb/940784 -
Windows Media Center - I get an error message indicating that Windows Media Center will not open
Hello
Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance
Robert,Thanks for reporting the good news. Enjoy!Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:>>> Hi Barb,>> Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.>> Cordially.>> Robert.Barb Bowman
-
To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.
Hello m.velentino,
Not sure if you are still having the error message isn't valid win32.applicaiton.
Get the error: not a valid 32-bit application can have several origins:
I have listed some of them below.The file is corrupted, bad or missing.
-If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
-If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.File is not designed for your version of Windows:
-If you try to run a program that is not designed for your version of Windows, you can get this error.
-Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
-If the program is an MS-DOS program more former start program or Windows, you can get this error.
-If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.File is a virus, worm or other malicious program file.
- This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
-If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
Hardware incompatibility.
-If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
-Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)Let us know if these suggestions help you.
Marilyn
-
When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!
Hi jeanamae,
the error message shows which codec is missing?
Is there a 'additional information' icon or the link?
Try to reduce the speed of the burn and see if you get the same question.
B Eddie
-
I just opened my Acrobat 9 Pro and received an error message indicating that my license had expired with number (148: 3). What is c?
Restart your flexnet licensing service, http://techie-buzz.com/how-to/fix-adobe-error-code-148-3-licensing-issue.html
-
Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?
Hello
Hope that helps!
Kind regards
Sheena
-
I am trying to open, fill out, and print a PDF from a reliable source. I updated Adobe Reader DC but continue to get an error message indicating that I have to "Upgrade". I used Google Chrome and Internet Explorer.
I have it!
PDF on Mozilla Firefox and Google Chrome XFA forms
Changed the setting in Firefox and it works. Thank God.
-
When you try to download adobe acrobat, I get the error message indicating that he met an unexpected failure. Any suggestions?
Hello
Please try to download the software from the URL here download Acrobat products | Standard, Pro | DC, XI, X and let us know how it goes.
^ Ani
-
I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.
lrfrustrated wrote:
I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.
Print > save as PDF - use an excerpt (part of Mac OS X), so Adobe Reader should have no effect on that at all.
As for the error "file corrupted", simply uninstall the Reader app will not affect it. Follow these steps:
Mac/HD/Library/Internet Plug-ins
Trash the files AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin
Mac HD/Applications
Trash the application Adobe Reader
[user] / Library/Preferences
Trash the com.adobe.Reader.plist file
To access the [user] / Library, hold down the 'Option' and click on 'Go' in the FInder menu.
Mac HD/Library/Application Support/Adobe
Trash the drive (full record)
Empty the trash.
Download the installer FULL here: http://get.adobe.com/reader/enterprise/
Quit your browser, and then reinstall the drive.
Run it from the Applications folder and agree to the license agreement.
You should have no problem with Safari PDF files download.
Unfortunately, ANY PDF file that says it is damaged.... You will need their trash.
Maybe you are looking for
-
the message as shown above only happens with FF - IE is ok & with some sites. The sites I get this message are the sites that I use all the time so do not understand what happened all of a sudden!
-
Re: Satellite L300 - does not play music CD
Hi new guys on this forum My Satellite will not play the music CD. When put to work very well. Please help do not know even how to read answers yet
-
y580 wireless cannot activate in windows 8
Hello Recently, I improve my y580 to windows 8. My wireless adapter is always off. When I use the diagnostic tool intel, he says that the wireless radio is turned off. I try to use linux to turn it on, but it showed that wireless is disabled by physi
-
Hello I'm totally new to LabView using Labview 8.6. I have a PXI-6704 and on three channels, I should generate a ramp between 0V and 840 mV less than 1 ms, then the signal must remain constantly at the 840 mV. This signal will begin some on-chip osci
-
When downliading updates 1 pop with a 670 error code what does this mean
When the download of updates 3 of 4 downloaded but the last one appears with a 670 error code, what it means?