I am connected to the Internet, but my new Airport Express Terminal still flashes orange. Any ideas?
I am connected to the Internet, but my new Airport Express Terminal still flashes orange. Any ideas?
The utility airPort on your Mac or iPhone / iPad is going to tell you why the AirPort Express is complaining... and offer a fix for what he thinks is wrong.
If you are in need of more details, we will need to know if you are using a Mac or iPhone / iPad. Mac, what operating system they are running to be the case as well.
Tags: Wireless
Similar Questions
-
I can't load ios9.3. I get a message that I am not connected to the Internet, but I check and I am connected.
Apple pulled 9.3 for some devices due to problems.
Just wait and try to come back later.
-
I can't update my iPad to ios9 because the error message says that my update cannot be verified because I am not connected to the Internet, but I am logged in?
Annoying, isn't it? I have the same problem but technical support person responded with a solution. Or maybe it's just too messed up a forum to find the answer? No m
or by e-mail. There are problems with Safari as well...
-
I am connected to the internet, but I do not know why I can not use some programs... someone please help me I am so frustrated!
Hi Alejandrac_677,
· What version of IE are you using?
· What operating system is installed on your computer?
· What happens when you try to access Internet Explorer, you receive no error message?
· How long have you been faced with this problem?
· You did it last changes before the show?
Please see the following to find out about Internet Explorer, and operating system.
Find out what version of Internet Explorer you are using
http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using
What version of the operating system Windows am I running?
You can also check:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
Please provide us with more information about the issue so that we can help you in a better way.
-
Hello
I have recently setup a wireless connection from my laptop on Windows 7 works very well. but I have a laptop with windows xp that show an icon connected to the internet, but I can't access the internet can you please help me.Thank youoriginal title: wireless internetDo you receive kb from the internet source or is it local only, and when trying to access the page host does upward with the site not found or 404 error, have you tried to repair the connection, it could be your antivirus protection is blocking the signal.
-
Unable to connect laptop (wireless) broadband
Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.Remove any preconfigured network settings wireless then rescan to make new connection settings
Hope this will do the needfull
Please let us know
-
my computer is connected to the internet but internet Explorer displays the message "internet explore cannot open the search page.
Hello
1. are you able to use with other applications that connect to the Internet?
2. when exactly you get this error message?
3. should we come up with any specific Web site?
4. what version of Internet Explore do you use?
5. don't you make changes to the computer until the problem occurred?
6. the problem occurs in safe mode with networking?
I suggest you follow the methods listed in order of appearance in the following Microsoft KB article:
How to optimize Internet Explorer:
http://support.Microsoft.com/kb/936213/no
Important: Reset Internet Explorer to its default configuration. This step will disable also any add-ons, plug-ins or toolbars that are installed. Although this solution is fast, it also means that, if you want to use one of these modules in the future, they must be reinstalled.
For your reference: Internet Explorer could not open the Search Page. http://support.Microsoft.com/kb/219004
Hope this information is useful.
-
Why my internet has stopped working
My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.http://support.Microsoft.com/kb/321448
In some cases, you must remove the cookie as well. -
I am connected to the internet, but my network sharing Center proclaims that I'm not.
The paradox connected but not connected
I am connected to the internet, but my network sharing Center proclaims that I'm not. Because some of my programs believe later, they refuse to patch. Also, I used the antivirals ware, scans, System Configuration and deleted and later restored the wireless network.
Any help would be greatly appreciated. Thanks in advance.
Hello
1 reboot as often, this allows the refresh icon and also stops a few things of
interfere with the slot troubleshooting process.Do a 1 Restore Point then you can go back to where you were if necessary.
How to create a Vista System Restore Point
http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html------------------------------------------------------
Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
version - click the driver update (cannot do something that MS is far behind the pilots of certification). Do
It will be the same for network (NIC) card - then right click on the devices and UNINSTALL - Reboot -
update the driver stacks.Now go look at the site of the manufacturer of the system for the updated drivers.
After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
manufacturer of system become your backup policies).Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlDownload - SAVE - go where you put it - right click – RUN AS ADMIN.
You can download several at once however restart after the installation of each of them.
Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
updated drivers.If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-----------------------------
Allow you to reset your TCP/IP stack just to make sure:
Start - type in search - ORDER - search box at the top of list and RIGHT CLICK – RUN AS ADMIN
Enter these one at a time (or copy and paste) and press ENTER after each
ipconfig/flushdns
nbtstat-r
nbtstat - RR
netsh int Reinitialis
netsh int ip reset
netsh winsock reset
Reset
----------------------------------
Make sure you know the details of connection to your wireless router - SSID and password.
You lose connection when you do and have to redo your logon.
Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
lower left click on merge or delete network locations - REMOVE all instances of your network (and the
others you don't use anymore) - REBOOT.---------------------------------
Other tips:If the use of a wired cable - Control Panel - device - network adapter - (NIC) Manager - double
Click Advanced settings and set the "speed & Duplex" 10 Mbps full duplex and then try 1/2
double-sided. Be sure to APPLY / OK. Maybe some help here: (don't forget the answer is)
complicated because there's probably more than one single thing, the origin of the problem)Others.
http://www.how-to-hide-IP.info/2009/05/16/CYBERGHOST-VPN-fixing-network-cable-unplugged-error/
http://www.annoyances.org/exec/Forum/WinXP/1109372091
There are many causes, one of which is the small monitor pays attention to the evil network device.
You can try to disable any other network such as WiFi device and reboot to see if that has an effect.Still a problem of equipment such as a loose network card that is not properly attached to the computer can
cause this.http://compnetworking.about.com/od/WindowsNetworking/f/cableunplugged.htm
I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
My husband and I share a PC. He has his desk top and I have mine, just that recently, I have not been able to connect to what anyone on my side of the PC, but its East side works well, it can connect to the internet, but I can't any idea what should I do? I ran virus scan and his side of own, cannot check the mine but cannot connect help please.
Hello
1. you remember to make changes to your computer, after which the issue started?
2. do you have a cable or a wireless connection?I would recommend that you follow these steps.
Step 1:
Test the issue in safe mode with network and check if that helps.
Step 2:
Configure the connection to obtain an IP address automatically.a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "b. right-click on the network connection, and then click "Properties".If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".e. click 'OK '.f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".h. click on 'OK '.Step 3:
Follow the steps in this article and check if that helps.
Why can't I connect to the Internet?
Steps are also applicable for Windows Vista.
-
IE connects to the internet, but another program get a cannot connect error
Using Vista, my internet explore is connected to the internet, but when I have other programs trying to access the Internet, I get a Cannot Connect to Internet Message. What is the cause?
Hello
I suggest you try resetting Internet explorer and check to see if it helps:http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-7-settings
It will be useful.
-
I am connected to the internet, but it is said in the toolbar not connected and connections are available. There is only 1 link and I'm connected to it. How can I change display green bars, instead of grey bars with a yellow star?
As the title says.It's weird, and I think that this is the reason why some of my programs connect properly?Does anyone have a solution to fix this problem?Hi DamienDwyer,
1. are you referring to the status of job internet bar?
2 when the problem started?
3. have you made changes on the computer recently?Method 1
Try troubleshooting of network running.Use Network Troubleshooter event logs to solve network problems
http://Windows.Microsoft.com/en-us/Windows7/use-Network-Troubleshooter-event-logs-to-solve-network-problemsMethod 2
check the status in safe mode with network and display the results.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeMethod 3
I suggest you try the steps from the following links:Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsWireless network card: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions -
I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?
You want to be sure that you use the right setting for your DNS server. You can move this in your browser using the digital URL for the what you want to access web sites. You will find them by using the PING command at the command prompt. Hold the Windows key and press R. Then type CMD and press ENTER. Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.
Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically". To do this click Start-> Control Panel-> Network Center and sharing-> view status.
Then click on properties.
From there, click on Internet Version 6 Protocol and properties.
Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically". Click OK.
Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.
I hope this helps. Good luck.
Good luck.
-
Windows Media Center tells me that I have sm not connected to the internet, but I'm out of windows media center I can access the internet. Why?
Disable the firewall and check the connectivity in media center.
-
Windows 8 worked well without problems. So I think some updates were automatically installed and now none of the 3 browsers work. Network utilities show always the computer is connected to the internet, but the speed tests it does not at all. Our other computer with Windows 8 ceased to be able to access the internet at the same time.
I tried to restore to a previous restore point, but it is still not possible to access the internet.
Thank you!
After making back all Microsoft updates and spend 4 hours on the line with the support of Microsoft, we have reduced to eSet having a service that forbade access to the internet, even if we have disabled the firewall. Stopping this service restored internet access.
eSet has been marked as compatible on different Web sites, but check on eSet they revealed there are questions.
Initially things worked but eSet must have updated something that caused problems.
Maybe you are looking for
-
64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop
Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available. There are many users Palm Desktop 4.x strives also to the declaration.I have synced m
-
Satellite A500 - correction required for AVATAR on Blu - Ray?
I have a satellite A500 and it will not play AVATAR on Blu - Ray. I understand there is a required hotfix. Where can I get the patch? See you soonRichard
-
Bluetooth doesn't work anymore on my macbook pro?
Someone knows the reason why the Bluetooth icon has a crossed tilde & links is no longer my wireless speakers. Thank you!
-
Get 80070673 and 80070663 error codes
I have Windows Vista Home Premium and have tried to install Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 and update for .NET Framework 3.5 Service Pack 1 for .NET Framework Assistant 1.0 x 86 (K
-
Silverlight protects videos from netflix from downloading movies on their computer?
Silverlight video security I am creating a video subscription website; set up like netflix.com. Silverlight protects videos from netflix from downloading movies on their computer? Where can I get more information about Silverlight video? Thank you