I am connected to the internet, but the wireless icon on the taskbar says I'm not connected to the internet.

Hi, my internet icon says I am not connected to internet (it has a red x on it) but I'm connected to the internet and navigate without a problem, however, the basic network information window, it seems that I'm not connected to a network and in the card itself, it displays the icon of my computer and green lines to my router but there is a red cross between the connection between the router and the internet icon (grey world).
I already uninstalled the driver for the network and installed again that I downloaded from the site of pilots, it is complete and fully up-to-date. There is no other device is trying to connect to the internet I know, can you please help? Anywhere where I can put up some screenshots for you see?

Original title: internet not connected but Internet icon
Thanks in advance,
Maurice.

Hi Agentesecreto,

Thank you for updating the State of the question.

If you encounter problems with Windows in the future, put it on Microsoft Community Forums. We're here to help and guide you in the right direction.

Thank you.

Tags: Windows

Similar Questions

  • Cannot connect to Netflix, says I'm not connected to the internet.

    Original title: quit working properly with netflix media center units

    Netflix will recognize is no longer my password in Media center, it is said that I am not connected to the internet. Netflix works great with internet explore. Also when I try to configure the connection Wireless in Media Center, it says my password is incorrect. When I check if the internet is always on, he says he works very well. This problem also exists in my Desktop cable. Netflix worked fine until a few days ago, in Media Center. I contacted Netflix, they had no answer, and Microsoft wanted to charge me $59 for a problem that I do not know that they created in the first instance. I'm sure the recent updates caused this. I tried to restore point, but it did not help. In fact it I cannot restore to the previous time. Help

    Hi JeanLambert,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    Check if there are any problems with the internet connection in Windows media center.

    Solve problems with an Internet connection in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-an-Internet-connection-in-window-Media-Center

    Known issues and limitations of Netflix on Windows Media Center for Windows Vista

    http://support.Microsoft.com/kb/972496

  • Update creative cloud says I am not connected to the internet it is rubbish

    Update creative cloud says it has updated, but when I try to update it says that I am not connected to the internet - it's rubbish. I'll try Photoshop CC for a year, but these error messages seem to point to a year of problems, so I'm not sure about the way ahead

    Hi ga16belvedere,

    Welcome to the community!

    You may need to check the firewall settings, if you are in a corporate environment, consult with the INFORMATICS team.

    Also, please follow the steps mentioned in http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html and see if that solves the problem.

    Thank you!

    Ankit

  • I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

    I can connect to wifi everywhere, but at my house from Beach-Iphone 5 s - is not the wifi because I am about this with other devices

    General suggestions for Wi - Fi problems, maybe one of them will help you... especially #4.

    (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (4) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

    (5) disable the prioritization of device on the router if this feature is available.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) to restore the device (ask for more details if you wish).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple Store for the evaluation of the material.

  • HELP linksys wireless USB adapter: (model # WUSB54GC) "acquiring network address" not actually connect to the internet! ?? Windows xp pro

    Hello. Ive been at this for 4 days now, I can't find a solution. I'll try to remember as much as possible regarding what ive tried.

    here goes...

    long story short, due to unfortunate system errors, I have reinstalled my OS XP home to xp pro. PC works great now! problem is... now my wireless adapter wont connect to the internet.

    When I had xp home edition installed, I could just plug in the adapter, and a few seconds, it would connect to the favorite network. (with all settings on Auto) no problem.

    now that ive put in OS, it's just cycling "absorbing the network address" infinitely...

    his watch the access point, the preferred network, showing the signal strength and do not show errors in Device Manager. right-click and choosing fix do not work. It gets stuck @ renewing IP address scene. its not send or receive packets under status.

    He EXPECTED to be functional? It uses a 10-digit WEP key.

    Ive tried both the linksys wireless monitor and the windows zero configuration utilites.i since removed the lynksys software screen because it never worked anyway. WZC is that used to work on xp family.

    I used " ipconfig/all" to determine the values of the network on the host pc. I tried manually punching in those values (IP address, subnet mask, gateway and DNS settings, according to the suggestion of a networking of friends) on the adapter wireless itself; using tci/ip options. still does not connect.

    Ive tried different USB ports, all that seems to do is to change the number of the wireless connection.

    It just does not connect to the internet.

    I have the driver I need for this after contacting linksys. I also disabled windows firewall and the firewall/antivirus of 3rd party associated with the network.

    He knows questions w / windows xp professional and this particular wireless adapter? (WUSB54GC) that's the only reason why I can think of that is not connected.

    what I forget? internet hard wiring of an ethernet port is not an option because there is no ethernet card installed in the pc.

    any help is greatly appreciated in advance.

    Thank you.

    Sorry it took so long for me to return.

    It was a setting under working group which had to be adjusted from reinstalling windows. (something that has been disabled I forgot, don't remember what it was since its been like 3 weeks)

    that he got the running dhcp... That is to say. allowed 4 dependence to work progrmas, boom, problem solved.

    the adapter now works with the automatic settings, using WEP encryption. as it should, and it was.

    Thank you very much for the replies, I appreciated the help.

  • I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I try the windows XP mode and it tells me that I need to connect a hardware device 3D

    I want to install the Commander of the force star wars on my new PC, but says it is not compatible with windows 64-bit. I have try on windows XP mode and it tells me that I need to connect a hardware 3D device. I really love the game and I want to use it again.

    Any old copy of Windows XP that could be installed in the host system? If you do not, it should be available at a modest price of an online seller. Perhaps (I'm not too), even an old Windows 98 TO work. The game (using a 3D engine) will not work under pure DOS, so you need a Windows environment so that it can work. Just FYI: If you get this old classic to run, new issues may arise. Known are the "mss32.dll" runtime error (you may need to replace this file with the newer version of SW:KOTOR 1) and the issue of video cutscenes (the games uses an obsolete video codec, Smacker - either you find an old *.) DLLS for it or have you convert movies in a modern format).

    In conclusion: get old games to run on software/hardware modern (it is not only a problem of BONE) is one of the most fascinating and rewarding challenges to a real fan. But do not expect it will not be easy "out of the box" (or simply insert a CD).

  • I can't download photoshop elements because it keeps saying 'you're not connected to the internet.  Well, if I'm not how did I get this far?  No problem with Safari or Mail.

    I can't download photoshop elements because it keeps saying 'you're not connected to the internet. Well, if I'm not how did I get this far? No problem with Safari or Mail.

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

    http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  • I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to sign

    I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to register for the conversion program.  I would rather talk to someone, but I can't find a phone number or the option for a cat.  I have a PC.  Any help would be appreciated.

    Hi dianar30180588,

    Try to use the service to export to PDF Online https://cloud.acrobat.com/exportpdf

    Kind regards
    Nicos

  • I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

    I can't connect on the section "browser widget. I have an Adobe ID account, I can connect to that, but when I try to go through dreamweaver, I can not connect. Any suggestions?

    Widget Browser is long gone.  Adobe stopped quite earlier.  The widgets were outdated and 3rd developer were not very keen on keeping them.

    Use the Adobe Exchange panels.

    Or look at jQuery Plugins.

  • When printing with elements 9 the epson 1400 says it's not ready, but I can print a document from aol on internet

    When printing from Elements 9 the Epson 1400 says it is not ready, yet it prints a document from the internet

    triple post

  • Network access: is it let me connect but a yellow explanation mark appears who says no access to the network

    sound to connect me but a yellow explanation mark appears who says no network access why is it?

    See if there is something in there that helps:-

    http://www.ComputerActive.co.UK/CA/PC-help/2033224/network-solved

    If there is, please voet as useful.

    Thank you.

  • How to restore the Internet connection and Volume icon in my taskbar?

    Missing icons on the taskbar

    Someone will help me to recover the volume and icon internection icon in my taskbar.  One day, that they just disappeared?

    Thanks for any help you might be able to offer.

    Susan

    Hello

    Try Method 1 and if it is not available, try Method 3 in the link:

    "How to activate or disable the Notification area system icons in Vista"

    http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

    You can also try a system restore to before that was the problem:

    «How to make a Vista system restore»

    http://bertk.MVPs.org/html/restoresysv.html

    See you soon.

  • Try to disconnect from the iCloud on my Macbook Air (El Capitan 10.11.2) but in system preferences, it says I have to create a new password for my Admin account - and then the new password I get says "password does not match"?

    I am trying to add my outlook email account to the Mail app, but because it's the same email for my iCloud, for some reason, they are linked, and I discovered that I need to disconnect from iCloud, and then add the outlook account.

    But when I try to disconnect from the iCloud in system preferences > accounts on the internet, it says I have to create a separate password - but when I get one it says "passwords do not match"? I tried to do different and same, nothings working: S

    The dialog box is like this:

    [Stop using iCloud?]

    Create separate password for (name of the admin account)

    -You will no longer be able to log in or unlock your screen with your icloud password, and you will need to remember two passwords separately.

    iCloud password: __________

    New password: __________

    Check: _

    Index of password: __________

    [Use the separate password?]

    Not sure why that is, that the password does not when it's supposed to be the new s password?

    Also, I would like to know what to put in the box check?

    Help much appreciated!

    Thank you

    Oh wow. I just realized I was leaving the case confirm the void and the message "password does not match" mentioned. I just need to retype my password. Hilarious that I have not worked this one earlier.

  • in Outlook Express, how can I send the same message to a group important (in the address book already), but have to each recipient can only see his name (not the Group)

    In Outlook Express, how can I send the same message to the large group (already in the address book), but have to each recipient can only see his name (not the Group)?

    To use the functionality of the BCC (Blind Carbon Copy), in a new message window, click View | All headers and type the addresses separated by a; Or: Click the button to. You will see your list of contacts and the choice to put them in the To, CC, or BCC field. Click on an address, and then click BCC to add it. Repeat for all of the contacts you want. (Note: most of the providers have limits as to how many messages you can send both a. 25 is common, but it varies).

    Put your own address in the box to. That's the only name/address that any recipient will see. If you leave the field empty, some people may not receive e-mail because of message rules they put in place, or restrictions imposed by their ISP.

    You can also make an entry in the address book using your e-mail address, but put something like the mailing list in the area of the display.

    *********************

    You can also create groups if you send e-mail to the same people often.

    To create a group of contacts:

    You can create a single group name (or alias) to use when sending a message to several contacts at the same time. Just create a group name and add individual contacts to the group. Then just type the name of the group in the box for when you send mail.

    1. in the address book, select the folder in which you want to create a group. Click New in the toolbar, and then click New Group.
    2. the Properties dialog box opens. In the group name box, type the name of the group.
    3. There are several ways to add people to the Group:
    a. to add a person from your address book list, click Select members, and then click a name in the address book list.
    (b) to add a person directly to the group without adding the name to your address book, type the person's name and e-mail address at the bottom of the Properties dialog box and then click Add.
    to add a person to both the Group and your address book, click New Contact and enter the appropriate information.
    (d) to use a directory service, click Select members, and then click search. Select a directory service in the drop-down list at the end of the text box. After finding and selecting an address, it is automatically added to your address book.
    4. Repeat for each addition until your group is defined.

    Note

    a. to view a list of your groups separately from the list of address book in the address book on the view menu, make sure that folders and groups is selected.
     
    b. you can create multiple groups, and contacts can belong to several groups.

    If you want to send to a group without addresses are displayed for each recipient, open the address book and make a new entry. Enter the name of the group in the area of the display, but use your address. (Some Internet service providers require a legitimate address in the line to and recipients will know it's from the Group).

    Click on the button to. Enter the name of the group using your address. Enter the group in the BCC field.

  • I called to cancel my subscription to the month for first adobe adobe support.  The representative told me that my membership was cancelled successfully.  But when I checked my account, it says my subscription needs to be renewed within a few days. Hoes i

    I called to cancel my subscription to the month for first adobe adobe support.  The representative told me that my membership was cancelled successfully.  But when I checked my account, it says my subscription needs to be renewed within a few days. Hoes it mean, the representative has not really cancelled my subscription?

    Hello

    You will need to contact support by calling/chat for this request.

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    Kind regards

    Sheena

Maybe you are looking for

  • Satellite Pro P300 (PSPC5E) - driver Webcam open fail on Windows 7

    I installed the RC of Windows 7 64 bit on my Satellite Pro P300 PSPC5E and I have problems with the configuration of my webcam and microphone. I tried to install the Wizard software for the camera, 64-bit (windows vista) to configure the webcam but I

  • Satellite P500 - keys open 'find' / 'search' - number NOT used

    * information system *: BIOS Version/Date TOSHIBA V1.60, 26/05/2009: Vista SP1: windows explore 8: 64 bit os: laptop Toshiba Satellite P500: computer is less than 1 mth old * Problem *:1 keys not 'use' numbers... when any number on the numeric keypad

  • Pavilion 23 parameters of microcomputer win 8.1 failure

    Pavilion 23 while a failure of the Office to provide the "PC settings" and was removed from the app store of Windows taskbar.  There is no doubt in my mind that this is a Windows problem.  How to reset this without returning to zero?

  • Work Web Newbie question

    I've developed for the Java platform in recent years. The main application is up for a rewrite and I must consider OS10 of course. And the current user based on OS5 It seems that the best choice would be to use Web works because it can be used on 5.0

  • Message "unread" icon for the ghost of blackBerry Smartphones

    I have a stray 'closed' mail icon, it was on my old BlackBerry (an 8830) and when I got my new BlackBerry 9650, all was good, until I finished syncing my business and guess what's back? now here's the catch, it shows (and as he has done before) it's