I am facing problem with playback of the audio recorded.

Similar Questions

• Problems with playback and the recording of the sessions

  Hi, covered!

  I met two annoying problems:

  (1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.

  (2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!

  All of the pieces of advice?

  Potapka wrote:

  (1) for some unknown reason, reading in new sessions is limited to-3db. So when I start a new session 16/41000 and import an mp3 commercial track just to check its spectrum or the tone, it's only hit - 3d on a meter, but it should be as 0db and cutting. Follow-up volume = 0, master volume = 0. I've never seen before, it happened to my Audition for a week or two, and I'm pretty shure I wouldn't change a thing.

  Hmm... go to Preferences > multitrack and reset the stereo panning mode to l/r cut logarithmic and no - 3dB Center. This will not happen then.

  (2) for the recording of the huge sessions with titles of 35-45 or more, sometimes it suggests to save without modifying the audio files, too (so I find myself with fresh, fresh generals (2), (3), (4), etc.) It's the most annoying thing, baaargh!

  Yes, it's boring. If you are absolutely sure that they are not modified, then remove additional ones. You can take a look at Mediasweeper too.

  Hi, covered!

  All of the pieces of advice?

  Please use English spelling normal - this way, I don't feel as if I want to run...

• Problems with playback of the DVD.

  I created a DVD project in again, nothing fancy, just a video track with a menu and a submenu.  When you preview, everything works great.  Burning ends without any problem, but the DVD is choppy and stop messing about 75 minutes.  I tried several burns and tested the DVDs to several players.  Everyone has the same problem at the same point.  I did a lot of projects very similar to this one and never had a problem.  Any ideas?

  I had this happen to me a few years - it's the DVD burner. Try an other burner - just a thought.

• "the problem with playback device" with Skype.

  receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

  Hi BeverlyBowers,

  Facing any problem with the sound on the computer other than on Skype?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Method 1:
  I suggest you to run the Fixit and check if it helps.

  Automatically diagnose and fix the audio problems and Skype webcam
  http://support.Microsoft.com/mats/Skype/

  Method 2:
  If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
  d. now check if the speaker or headset is listed here and right click above and choose Activate.
  e. highlight the speaker or headphones and click on 'Set as default'.

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Dear Sir, I am facing problems with my creative packeger office, I chose to deploy IT, PS and Adobe Dc Pro on some of our clients, but installation is arrived with only HE and PS. What is the problem? Thank you

  Dear Sir, I am facing problems with my creative packeger office, I chose to deploy IT, PS and Adobe Dc Pro on some of our clients, but installation is arrived with only HE and PS. What is the problem? Thank you

  Hello

  Acrobat is what we call an 'exception' and needs a slightly different steps to install.

  The following document gives details on the deployment of both DC and XI of Acrobat since a CCP package versions.

  Using creative cloud | Deployment of Adobe Acrobat

• In firefox 30, I am facing problem with my wordpress site. I have a blank page.

  After the update to firefox 30, I am facing problem with my wordpress site. My http://www.anthony.co.in Site works great until firefox 29. but little now a blank page. Tried to reset/reinstall and even tried the other PC. Still the same issue. After downgrade to firefox, my site is back very well. Only problem is with firefox 30. Any help would be useful

  Hello

  Line 500, z-index for less than 81.

  . RM-wrapper > div > {div.rm - front}
  z index: 80;
  }

• Problem with playback device?

  Video call in progress version 7.2.59.103 3 days ago made in New Zealand was in line for 40mins no problem what ever. as soon as I ended up call message problem with playback device. and as soon as I use either call or video call immediately, the page returns to the home page and does not appeal. checked devices audio all working correctly, no update of windows for the last 3 weeks. using Skype on my asus laptop 5 years on widows 7

  Hello, do not know what I did but trhe message has diasppeared, and the test call also works OK now.

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• Skype usage error: problem with playback device

  Original title: Skype.

  I'm calling by Skype and it is written that I have a problem with "currency of reading".

  What should I do?

  Hello

  ·         Audio devices work otherwise?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also refer to the support of Skype.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Is a person having problems with playback with blocking sequences?

  Is anyone having problems with playback after creating a multicam sequence? This occurred after the recent upgrade.

  Basically, I merged my video files and audio files into one (fine and dandy), but when I tried to look into the window of the monitor or timeline, he would not play! What is the problem? I've done several times before...

  Let me know if anyone knows this.

  Thank you!

  I talked to Tech Support yesterday and they told me to enter all your audio clips in the sequence Ctrl + (secondary click) click on them and press Render and replace. Then, you close app and load project again you. It has worked for me since I went deep into audio original for all sequences of blocking and rendered and all replaced. Apparently, there is a problem in this version on the audio clips in sequences making making them generate this error, but this type of tech support does not explain to me exactly what was going on. Apparently the Render and replace fuction restarts a little audio clip and allows to you to sequence work normally again. Make sure that you apply to the original audio clips of each cam, no to your chopped pieces place in the timeline you edit.

  Let me know if it worked.

  Good luck.

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Having a problem with loading in the combustion chamber

  Hello

  I'm having a small problem I could use help with. I'm not really sure what's going on, but I'm having a problem with one of the pages of my site does not when you try to view the page in Firefox. But if I loaded this page in Safari or Chrome, it loads very well.

  Here is the URL of the page to take a look:
  _{Specific link removed by moderator display ~ J99} < sitename >.com/top-10/top...services/

  No idea why this might be happening or how to fix it? I don't know if it's just my computer, or if others have the same problem.

  Thanks in advance,

  Mike

  There's two of us have confirmed the page will load so I deleted the link to display as it could be construed as advertising.

  P.S. Note only forum content in the resolved threads is now indexed by search engines.

  (Last updated: February 14, 2015 08:45 CEST)

  Solved the locked thread now ~ J99

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version

  I have an older version of Firefox 3.6.6 I think I'm having a problem with one of the websites that I sign. Is it possible to upgrade to the latest version. Without losing all my favorites and the saved passwords?

  Yes, see this article:

  • Import bookmarks and data personal from another browser

  After:

  • Update to the latest version of Firefox