I am getting error Fix It "this certificate is not approved or not valid." How can I fix it?

Similar Questions

• table of partition not valid-how can I solve this... cannot do anything on laptop

  table of partition not valid-how can I solve this... cannot do anything on laptop

  If you get an error about "Can't fixboot", then proceed to the next step.

  Type bootrec /fixboot (with a space after bootrec) at the command prompt, type enter.

  Type bootrec /RebuildBcd (with a space after bootrec), and then press the Enter key.

  If this is not successful, it is likely that the disc is not recoverable, and you will have to boot from the recovery disks to reinstall windows.

• I get error code 802000D when I install the updates of windows. How can I fix this error?

  I get error code 802000D when I install the updates of windows. What this mean and how can I solve this problem? Please answer. Thank you.

  Hello

  ·         Did you change your computer before this problem?

  I suggest to reset the Windows Update components and check if it works.

  See article:

  http://support.Microsoft.com/kb/971058

• Error message: Windows printer Interface does not. How can I fix it?

  How can I fix it? I can't get my printer to work! Tried to uninstall and reinstall printer driver, adding "patch" & other upgrades without result. I have Vista, a Dell xps m1330 computer laptop and a dell 926 printer.

  Hi whowhatwhenwhere how.

  Did you go to the Dell website?  They should have drivers for your printer/machine:

  http://support.Dell.com/support/downloads/index.aspx?c=us&CS=19&l=en&s=DHS

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Job say computer cannot run due to destination not valid-how can I find this work that is not finished?

  I continue to meet a pop box - up with the notification that "work may not run because of invalid destination" I have not any idea of what job does not or why they attempt to run anyway - I do not remember to initiate a process or downloads. How can I determine what the computer trying to run I can hoefully solve the problem?

  If it's something real windows then it should appear in the event log. Click Start, and then type in the event log. Begin if and look under system or application right after that the error or write at once. Once you have the found event poster here. He should tell us what ID applications.

• I have several computers I need to reinstall the xp/vista os in and it tells me when I put the codes on computers that the cd keys are not valid, how can I solve this?

  I had to wipe the hard drives on these systems, valad codes exist on computers, I received a message that my system vista s code was wrong also, I could entered the wrong one, because it is a laptop that has been around the world a couple of times on a submarine with me, if the thumbnail has been somewhere and I can't tell if it's a q.o , or a c.

  What can I do about it?

  Ive been fixing computers for a few weeks now and I'm starting to think that if I wipe the hard drives with a nuclear weapon that program its easier then in case of problems the problems generated by my children,.

  Ive still 3 more fix, but this last one won't let me in him and the custom of vista, that either, I left my vista ultimate go on this one and put xppro on it, I don't like vista and I wanted to do that for a while, is there anyone to call, I can take photos of computers or video , or start a webcam, to provide evidence of the stickers,?

  Dan Falcon

  yellowbronco

  MS/CS/SS USN - Ret / tell.

  Hello

  You can access the link that provides information on how to identify, locate, and replace a product key

  http://support.Microsoft.com/kb/811224

• While trying to access another document, I get this "error in the object calling ScriptTypeError not valid."

  Original title: error

  I work in the database search.  In a particular site while trying to access another document, I get this... Error in the object of the invalid ScriptTypeError call.

  How can I fix it?  I be milling of the answers, I went to frequently asked questions, found no answers. I hope someone can help.

  Thank you

  pipster43

  Hi Pipster43,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please ask your question in the Forums in TechNet Windows Server.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• Download the file from the TFTP and get this error "this image is not valid for this platform.

  Hi guys

  You try to download a new IOS for my CISCO ASA using TFTP I get the following error

  Access tftp://189.206.211.24/asa825-33-k8.bin...!

  % Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)

  -Anyone has the same error.

  Also, I have tryied using the ASDM but I get the same error.

  Kind regards.

  Hello

  As says the Description This is not for model ASA5580.

  Click on the link connected with your account

  http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378

  Then choose the software Adaptive Security Appliance (ASA)

  Then navigate through the drop-down list on the left

  Provisional-> 8-> 8.2.5 interim

  And you will get the visibility (click to enlarge)

  

  -Jouni

• I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  Look herehttp://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/when-i-access-internet-explorer-a-message-says/25bef4a4-bb01-46ac-bc68-11c81e7b55e7

• ﷯Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number.  How can I find this line?

  ﷯Error - error message: an element on the page "News" at location 33 642 requires the pixelation, but is too large to rasterize. Resize it smaller and try again... I can't fix this or find that the line number.  How can I find this line?

  I don't know why it worked, but I changed the police and was able to download Web site.  Thanks for your help!

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  at the beginning until you get a message-"Unable to locate the DLL:\language\english.dll language" - How can I get rid of this?

  Have you Spy Sweeper and uninstalled the software. It seems that other software can also use this driver.

  You can delete the entry start and the error using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).
  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

  I want to install windows 7 and I get an error saing that I need to install via windows PE? How can I go about it?

  Hello

  1. you try to perform a new installation of Windows 7?

  2. where did you buy the Windows 7 DVD?

  This particular message occurs generally if you try to perform an upgrade on the spot of a recovery disc or installation support OEM (Original Equipment Manufacturer) that contains a custom defined configuration and can't stand not running an upgrade installation.

  The message means that you probably need to start using the installation media. You can also contact the manufacturer of your computer to determine the type of installation media that you have and to confirm what options are available when booting from the disc.

  Here are some links that provide additional information about the installation of Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Alternatively, you can consult this article to understand what is Windows PE.

  http://TechNet.Microsoft.com/en-us/library/dd799308 (v = WS.10) .aspx

• Please help: error creating files the digital certificate is not valid

  Hello, I have a problem to publish .air for Flash Professional CS5.5 desktop. When I create the certificate (.p12) file, and then click Publish but apparently alert dialog box is "error creating files the digital certificate is not valid. Your certificate has expired the Mar Mar 12 15:34:32 ICT 1963 "How could I do to solve this case and export the only desktop .air file?

  Double post, responded to Please help: error creating files the digital certificate is not valid.

  Locking thread.