I am not able to connect on all sites with my system XP displays a 404 error code after a Trojan horse (trojan. ADH.2) was found and quarantined by norton.

Similar Questions

• I am not able to connect to my computer with my password, it tells me to connect using my administrator password.

  I am not able to connect to my computer with my password, it says Séverine using administrater password but it is not the password of accomplishments and keeps telling me to enter my password. After several attempts to connect to my computer it stops. What can I do?

  Hello

  Press twice CTRL + ALT + DELETE (at the same time), you will get the classic quick and allows you to enter your user name.

  I hope this helps.

• Not able to connect to the server with modem 56 k

  I try to connect my Tecra via modem 56 k Internet.
  Also, I tried with another computer laptop with the same details and that worked.
  But when I try it on my Tecra I get an error that is not able to connect to the server.

  So I think that it is a parameter that is not defined correctly for the modem.
  (If you compare it to another laptop all parameters are the same as windows).

  Thanks in advance,

  Theo

  Hello Theo

  Please remove the Dial-up connections all created and after that, remove the modem from Device Manager. Restart the device and initially ensure that the modem is properly configured (query modem Agic under Diagnostics). I put t know which Tecra you have, but many of them have preinstalled TOSHIBA PC Diagnostic Tool. With this tool, you can see all the equipment including modem.

  After having it set up new Dial-up connection and check the functionality. Be sure to wait for the tone option is disabled.

• Since last night, I was not able to connect to any site

  Since last night I couldn't connect to any site for example. FB, 2 newspapers, my account bank etc. Whenever I have between PW and I click on enter, this line goes out and ask me to re enter PW. In order for me to access one of these accounts, I have to create a new PW each time... can anyone help?

  Hello

  1. what operating system is installed on your computer?
  2. you remember to make changes to the computer before this problem?
  3. do you use Internet Explorer to access these sites?
  4. do you get error messages when you try to access Web sites?
   
   
  If you use Internet Explorer, I suggest you follow these methods mentioned below and check.
  Method 1: Why are some blank pages or incorrectly displayed in Internet Explorer?
    http://Windows.Microsoft.com/en-us/Windows7/webpages-look-incorrect-in-Internet-Explorer
   
   
  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897
  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
   
   
   
  Method 2: Optimize Internet Explorer.
  http://support.Microsoft.com/kb/936213/he
  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.
   
   
  
   

• Could not initialize a flash form.  The mxml.cfswf file is displaying a 404 error.

  I'm running ColdFusion 11 IIS 8.5 and try to view a simple flex form.  It generates the infrastruction of the form in the browser.  However, when he attempts to access the < number >. MXML.cfswf file I see a 404 error in the IIS log.

  Any help with this problem would be appreciated.

  I have solved my problem.  The servlet was not enabled in the web.xml file.  Once, I turned on the servlet and restarted the ColdFusion page initalized process server service.

• not able to connect to all programs

  whenever we try to connect to the internet or to any other program on the computer it tells me to choose a program to open this file. If this happen and how can we solve this problem?

  Sounds like an infection (try this free online scan: http://safety.live.com )

  or something has changed the 'open with' to be 'notepad.exe' exe

  For that, try this: http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  -John

• Software not able to connect to a site in connection with

  Several software I require connection to the internet (Skype, iTunes, software that allows someone else to control your computer).  When the software tries to connect, they receive a message that it cannot connect.  Because I can surf the internet without any problem, there is no problem of modem/router.  I wonder if there is a setting I have to change.  I tried to open ports on Defender and even (for a time) by turning off my antivirus.  Any other suggestions?  I use Vista service Pack 1.

  What firewall you turn off?  If it was the built-in Windows Firewall then that is a sufficient action to check the firewall.  However if it's a third of firewall, then turn off does not prevent the firewall settings remained in force through the other parts of Windows.

  Your statement "I tried opening ports on the defender", not referring to Windows Defender, or another program (Firewall)?  If this is Windows Defender, have you tried to disable real-time scanning temporarily?

  Some third-party software Anti Virus contain hidden too firewall components.  So, do the same, some Nvidia Chipsets.

  Had nForce Chipset and network problems...
  http://www.Tek-Tips.com/viewthread.cfm?QID=1437402

  You also try to temporarily disable the firewall of the router?

  Y at - it any mention of the "Proxy servers" in your LAN settings?  See IE / Tools / Internet Tools / connections / LAN settings.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• not able to connect Toad/sql * plus with ebs R12.2

  Dear experts,

  I have a R12.2 EBS instance with linux 5 (32-bit), but trying to connect to the database using toad / sql * plus of the client machine. his mistake.

  another instance ebs r12.1.1 with the work of database 11g very well,

  Please suggest how I can fix it.

  Database - 11.2.0.3.0

  EBS - R12.2

  OS - release of the Red Hat Enterprise Linux 5.5 Server (Tikanga)

  concerning

  pritesh Rodriguez

  problem is solved.

  using the id of doc metalink 291897.1.

  concerning

  pritesh Rodriguez

• Not able to install the updates, tried several times to date, 643 as an error code.

  I have this PC, just a few days, with Windows 7. When I try to install updates day or the other so that the closure of the PC or doing it for the PC works, I always get a message that it failed. It is written code 643. And it is on these updates (I do not know if I translate it's good): Microsoft XML Core Services 4.0 Service Pack 2 (KB973688), a security update Microsoft XML Core Services 4.0 Service Pack 2 (KB954430), Suite Microsoft Office 2007 Service Pack 2 (SP2).
  I tried to install them separately too and I probably have enough space on the hard drive.
  I would be happy for any help. Thank you.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Not able to connect to internet router

  BEFSR41 ver 4.3 - the installation cd seems to be faulty at step 9. I went in the page setup and can now get to step11, but then I get a message that the router is not able to connect to the internet. I have a netopia modem (United 3300 series), my ISP is Centurytel. When I check the status it says connection, but never connected. Help, please!

  Good to hear, thanks for posting back.

  Please mark resolved forum and all posts Cudo feel worthy.

• I am not able to connect on my user profile.

  I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understand.  It seems that the person must jump through a bunch of hoops just to solve a problem that happens sporadically for no apparent reason a lot of people.  I had this problem before, except that all my accounts could not be consulted and spent a lot of money to get it repaired.  Now, four months later, cannot access my main account, and the other two accounts don't change anything because they are not the main account.  What can we do to prevent that from happening.  You should not have more than one account as your main account for just because you know you need to because you know it will happen again, no matter what you do?

  Hello

  Maybe this will help you:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
  known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
  Profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
  two with the same password) use to test or difficulty of the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Renamed user AD not able to connect

  Hi guys

  I have a problem with a user with access to vFoglight through LDAP authentication. The user was renamed to AD. (name changed)

  After the name change, the user is not able to connect.

  In the audit trail, the user is first OK authenticated, and then in the same second there is a connection FAILURE.

  I tried to remove the user from the vFoglight, wait for a while and then try to connect again.

  I checked on the AD domain controller, and the user is authenticated OK

  What is a SQL question?

  Any ideas?

  Hi, Lars

  I hope you get a solution to your problem, but someone else might have the same problem,.

  I will be the top my solution to the problem that just had.

  We are in a process to rename all connections of users I have AD...

  And once a connection of users has been renamed to AD, the user could not log on.

  With no errors in the journal errror FMS or on our advertising servers.

  New users was created in correct Foglight, but when the user tried to log on, but still had a connection error.

  I found a solution that works for us.

  I found that when I turned on debugging on FMS, I got this error message in the error log:

  Cannot insert duplicate in the "dbo.sec_user_alias" object key The duplicate key value is (Michael dry).

  We run the Foglight database on a Microsoft SQL Server, so I looked in the sec_user_alias of the table,

  and even that I had deleted the former user in Foglight, the login name and the username was still in this table:

  userAlias username isdeleted

  str_xxx Michael dry F

  So I just update the table of user with this name:

  UPDATE sec_user_alias

  SET username = 'Michael dry - old'

  WHERE useralias = "str_xxx."

  and then I could connect with the new login user name,

  but all the settings for this user and config disappeared...

  And as I have not talked with Quest/Dell about this, I don't know if this is allowed to do.

  and I don't take any responsibility that it will work in your configuration.

  Best regards.

  Michael

  Update: I found this: Knowledge Article 85132 - 'LDAP user cannot connect after LDAP name changed"- https://support.quest.com/SolutionDetail.aspx?id=SOL85132

  Post edited by: Michael dry

• not able to connect to windows update

  Win 7 pro 64-bit, sp2 after windows installed 10 has not not able to connect to update server. When an attempt is made to trust installation and a host file resume all cycles of memory and cpu and it will continue to do that too long current arrives at the machine.

  I ran fixit, check tools sfc, 3 different types of root kit tools and PGE antivirus both offline and online, new installation did not help, formatting the drive did not help.

  support Microsoft is still without knowing what is really the issue. If you can help would like assistance

  This problem seems to be related to a windows installation failed 10 what I finally did after a month of working with microsoft is I went to the microsoft update catalog site and downloaded and installed an update stand-alone said to improve the State of update and after about 4 hours it installed and downloaded updates.

  It's the microsoft catalog https://catalog.update.microsoft.com/v7/site/home.aspx

  hope that this help anyone having this problem.