I am registered with hotmail, while of iget for incoming/outgoing email outlook web site. I would get totally disconnected to outlook and keep the hotmail Inbox, etc.

Similar Questions

• I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not display in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  I created a custom and registered with a specific name date format. However, when I open a new worksheet, my saved format does not appear in the menu drop-down? Am hoping that I don't need to create the same format for each new sheet?

  You must save the spreadsheet containing the new date as a model format and use this custom template for each new spreadsheet where you want that this date format personalized at your disposal.

• Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed

  Hello
  Welcome to the Microsoft answers site.
   
  By design, the game is not compatible with windows7.
   
  You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.

  Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.

  I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.

  Here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Let us know if you have any questions.

  Thank you and best regards,
  Azam - Microsoft technical support.

• How you copy mp3 files from the my music for a cd drive folder and keep the files in mp3 format, format it with windows 8

  in the past with previous versions of windows, you can easily copy MP3s to a cd and keep the files in format mp3, format thus creating an mp3 disc, you made by selecting the songs you want to copy on disk, you must select the songs of the my folder music and make a click right then on the song selected or songs , you would then select send, and then select the drive that contains the blank cd in it to send the songs to, you choose then to a standard audio CD or data cd, you must select the option data cd and the drive will keep the songs in mp3 format, it was all done using windows Explorer. I would like to do the same thing to do these discs mp3 on my computer windows 8, however I can not understand how do, can help a whole me with that?

  Hello

  I would ask you to check out the link and follow the steps in the article.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-in/Windows-8/burn-CD-or-DVD-Media-Player

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Have been CC because it came out; now when I sign on Adobe indicates that I am trial with so many days left.  No SN check reviews like that I usually get. Want to come back to the subscription version that the trial version does not provide

  Have been CC because it came out; now when I sign on Adobe indicates that I am trial with so many days left.  No SN check reviews like that I usually get. You want to revert to the version of subscription that the trial version does not include updates as new versions of camera raw.  How can I get this problem?

  Hello

  Please, you can consult the links below-

  • Connect and disconnect activate Cloud Creative applications
  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Evaluation mode showing creative cloud
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Kind regards

  Sandrine

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.

• While in Mode to burn, I get a connent a burner and restart the player. What needs to be done when I though that my burner was first connected?

  I have the charger windows media player and I'm trying to burn a CD from my list of my drive misic hard exturnal but he will not even appear that there is a CD in the port and it says connect a burner and restart the player?

  Hello

  The problem occurs with any other CD burning software?

  Download and run the tool fixit from the links below and if it solves the problem.

  
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

  
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• I replace a website done previously before Page with a new site that I built in Dreamweaver, but wants to keep the URL address, what is the best way to achieve this?

  I replace a site is at the top with a new website that I'm building in Dreamweaver, but want to keep the same URL which is the best way to go about this?

  If you want to keep the same hosting provider, you have nothing to do. Just delete the old files of the site and download your new.

• How to have a menu with a submenu and keep the rollover State when on submenues

  I'm trying to find a way to have my top menu bar to stay on the status of "rolling" when the mouse pointer is on the submenus. My menu has different colors for each part with turning single images for icons. I would like to have my submenu visible and rest in its condition of bearing on the main part of the menu. Is this possible? I tried to watch the forums here, but did not find it.

  Please see this for what I mean: http://demos.go2eventlink.com/Eventlink-temp/temp/

  Hello David, I got it figured out. The Setup program knows a blank publication and I even had a black composition inside for a menu with submenu.  I also checked the options as Position: stacked, see the target on turnover, hide in slowing. Then the key is to have the bounding box of the 'zone' covering the menu and submenu area which will then eject the mouse if still considered in the area of "churn" even if it is out of the menu and above or around the area of submenu. Also the bearing is the same State as the mouse downwards and the condition of the assets.

  Here's what I did. I hope this helps.

  Web site - 1.muse - Google Drive

• I am currently using an imac desktop with firefox as browser. I need to access a Web site that requires 128-bit encryption. How can I increase bit encryption?

  When I login to view my accounts, a pop-up asks me to use explore or netscape with 128-bit encryption. Since I use a mac, I don't have either. I can up the encryption using firefox?

  https://support.Mozilla.com/en-us/questions/903234

  See also report (strengthen net) SSL encryption in the response of cor-el , in the "support.mozilla" link in the link above.

  Thank you

• Sign up between 2 tables without correspondence with values and keep the number of rows in the first Table

  Hello Experts,

  I have a problem that is a little tricky. Requirement is if 2 columns (region and Code in the tables below) match exactly, then it is Best Fit, if one of the columns match while it is average in shape, if the two columns do not match then it's worse to adapt.

  Create Table Table1 (varchar2 (10), varchar2 (10) of the filter region, Code varchar2 (10), revenue Number (15), owner varchar2 (5));

  Table1:

  Insert into Table1 values ('Test1', 'Midwest', '0900', 3000286, 'P1')

  Insert into Table1 values ('Test1', 'Midwest', '0899', 36472323, 'P2')

  Insert into Table1 values ('Test1', 'Midwest', '0898', 22472742, "P3")

  Insert into Table1 values ('Test1', 'West', '0901', 375237423, 'P1')

  Insert into Table1 values ('Test1', 'West', '0700', 34737523, null)

  Insert into Table1 values ('Test1', 'West', '0701', 95862077, "P3")

  Insert into Table1 values ('Test1', 'South', '0703', 73438953, 'P4')

  Insert into Table1 values ('Test1', 'South', '0704', 87332089, 'P1')

  Insert into Table1 values ('Test1', 'South', '0705', 98735162, 'P4')

  Insert into Table1 values ('Test1', 'South', '0706', 173894762, "P9")

  Insert into Table1 values ('Test1', 'South', '0902', 72642511, 'P6')

  Create Table Table2 (filter varchar2 (10), region varchar2 (10), Code varchar2 (10), plafond1 Number (15), Limit2 Number (15));

  Table2

  Insert into Table2 Values ('Test1', 'ALL', ' 0902', 15000, 10000)

  Insert into Table2 Values ('Test1', 'ALL', 'ALL', 20000, 12000)

  Insert into Table2 Values ('Test1', 'Midwest' ' 0900', 10000, 5000)

  Insert into Table2 Values ('Test1', 'Midwest', 'ALL', 18000, 8000)

  Insert into Table2 Values ('Test1', 'West', 'ALL', 16000, 6000)

  Insert into Table2 Values ('Test1', 'West', '0901', 10000, 5000)

  Final output

  Filter the income Code region owner plafond1 Limit2

  Test1 0900 3000286 P1 10 000 5 000 - Best Midwest (region because both Code Matches)

  Test1 0899 36472323 P2 Midwest 18 000 8 000 - way (because the region corresponds to only), we consider 'ALL' for the Code

  Test1 0898 22472742 P3 Midwest 18 000 8 000 - way (because the region corresponds to only), we consider 'ALL' for the Code

  Test1 West 0901 375237423 10 000 5 000 - Best P1 (region because both Code Matches)

  Test1 West 0700 34737523 16 000 6 000 - medium (because the area corresponds to only), we consider 'ALL' for the Code

  Test1 West 0701 95862077 P3 16 000 6 000 - way (because the region corresponds to only), we consider 'ALL' for the Code

  Test1 South 0703 73438953 P4 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0704 87332089 P1 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0705 98735162 P4 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0706 173894762 P9 20 000 12 000 - worse (because region both Code DON T Match ' "), we consider option as worst 'ALL', 'ALL '.

  Test1 South 0902 72642511 P6 15 000 10 000 - way (because the Code corresponds to only) we consider 'ALL' for the region

  In the final result, we should have row count equal to Table1, and as soon as there's game (best first, then middle, then the worst), then if is once again, that we should ignore.

  There are other columns in the tables as well.

  Thank you very much!

  As you wish...

  select filter, region, code, region2, code2,
  revenue, owner, limit1, limit2, match
  from (
    select filter, region, code, region2, code2,
    revenue, owner, limit1, limit2, match,
    row_number() over(
      partition by filter, region, code order by match
    ) priority
    from (
      select a.filter, a.region, a.code, a.revenue, a.owner,
      b.region region2, b.code code2, b.limit1, b.limit2,
      case
        when (a.region, a.code) = ((b.region, b.code)) then 'Best'
        when a.region = b.region or a.code = b.code then 'Medium'
        else 'Worst'
      end match
      from table1 a
      join table2 b
      on a.filter = b.filter
      and (b.region, b.code) in (
        (a.region, a.code),
        (a.region, 'ALL'),
        ('ALL', a.code),
        ('ALL', 'ALL')
      )
    )
  )
  where priority = 1
  order by region, code;
  

• Need to re - register a completed form on in Acrobat Reader and keep the same file name.

  I did collect a form developed for our client in. They need to access and save it several times without making several versions.

  Now that they can open, fill out some fields and "save under" a different file name. They must then go back and edit or add additional information to train at a later date.

  He won't let not the re - save the file with the same file name, only "save under". It is not very practical because they will end up with many versions of the same shape and all earlier versions would be obsolete and useless for them.

  You must disable the preview in Windows Explorer or close Windows Explorer.

• Using an image with transparency in the book module and keep the transparency?

  Hello.

  Let's see if I can explain my question, I'm not an experienced LR or PS user (and not in the English language)

  I changed an image in PS and cut out a part of it and pasted into a new layer and then adjust the opacity of the background at 0%.

  Then I saved the picture in PSD format and imported to LR to be used in ledger. When I then use the peak and attached to the photo book have a white background.

  What I want is that only the cutting part appears in the book and the rest of the area of the image is in the same color as the color of the pages (in my case clear yellow).

  Is it possible to do what I want to do and if it is, how?

  Shovelc wrote:

  What I want is that only the cutting part appears in the book and the rest of the area of the image is in the same color as the color of the pages (in my case clear yellow).

  Is it possible to do what I want to do and if it is, how?

  You should be able to do this by building the PSD file layer of the same color as background color LR ledger. The key to making this work correctly is by matching the two background colors. In the book LR module background panels 'Background color' color picker icon, right-click in the color selector box, click on select HSB. In the PS use fill and set the background color using the STL values inside the book LR module. Color space ProPhoto RGB native of LR in PS helps prevent the background color to move within LR.

  Example for 59, 16, 93 HSB

  

  

• How make a regular crash with a component source multicam editing and keep the NEST?

  I just want to cut the source multicam in my edit sequence. My edit sequence already has another clip multicam inside. I just want to add a different multicam clip on it. I load the multicam clip in my source as a regular clip monitor, but when I hit edit, it cuts in all the traces of my mulitcam, instead of a track of the nested multicam clip. What I'm missing here? I just avid then maybe that's not really possible? My solution is to drag the clip source multicam tray on the icon of the new, which creates my clip nested within a timeline, copy the nest, then stick in my real Edition. Why so many markets for such a simple thing?

  What version of Premiere Pro are you using? If I understand the behaviour you statement, looks like you have the feature "KEM Roll" (new CC7.0) Insert value and crush Sequnces of the individual Clips. In the case where you do not know what I'm talking about, this feature is controlled by the button most left in the upper left corner of the timeline panel, next to the button magnet (Snap).

  If that is not linked, then maybe some more info on your workflow will help. Start off by explaining how you create your footage making - there are two methods.

• Export the clip with no video, audio only and keep the timecode

  I have transcribed for a documentary film clips. There are many of them and my transcribers using a program that can use the timecode of audio and video files.

  We are Dropboxing so I want them to be just audio files, but I need the timecode to stay on the clips when I export the audio.

  So far he strips and all I get is life.

  The original videos are in. MTS format. They import in first CC very well, but when I export the audio the initial timecode disappeared.

  The other option would be to compress the video and the watermark, but the time code disappears when I do that too.

  I think that I get it.

  You want just the files as small as possible. Right? That's why you just want audio?

  Well, rather than do without the video completely, just to reduce the flow of something terribly weak, where the video is barely able to be seen. You want to export to a format that the program can handle, like Quicktime. But where I could export to 25 Mb/s, you might be able to export 1 Mb/s. The video will look terrible. Well, so what? Who cares? Right?

  But there the timecode.

  When their web page says they can accept different audio formats, I don't think they hear audio by itself. They mean that the audio in the video stream may be audio AIFF, WAV, AAC and MP3.