I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

Similar Questions

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

  problems with wireless Vista "local only".

  How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you then reconnect wireless... nothing else was changed on those computers and other devices can connect ok?

  Hello

  Each router is assigned to the specific address (called IP address or IP address). And each router maintains its own database (called as base of router) to follow the networking devices communicate with him. When the router is changed, the particular router is unable to detect the device, especially the network card to communicate with the computer.  Since he does not have details of the database of network devices, communicate with him.

  • You are able to access the Internet?

  Try the steps mentioned below and check:

  Method 1:

  Step 1: Enable or disable a network adapter and then check:

  http://Windows.Microsoft.com/en-CA/Windows-Vista/enable-or-disable-a-network-adapter

  Step 2: Run Network Diagnostic tool and check:

  Network connection issues: http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference links:

  Of network connectivity status incorrectly as 'Local' only on a Windows Server 2008 or Windows Vista-based: http://support.microsoft.com/kb/947041

  Setting up a wireless network: http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-wireless-network

  Connection to wireless with Windows Vista: http://technet.microsoft.com/en-us/library/bb878035.aspx

  Hope it works.

• I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files.  I downloaded the lateset update but still can not read how can I get this problem solved thanks

  Hi tonyf,.

  Greetings!

  Each device is compatible with a minimum version of camera raw.

  Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html

  Please check if you have this version of the camera installed which include your raw files.

  It would also be that your photoshop will not have to install this version of camera raw as its very old.

  In this case, you can convert your raw files to DNG and can use it.

  To convert the files to DNG, you must download and install the DNG Converter.

  Here is the link:

  Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows

  MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106

  Concerning

  Jitendra

• I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  I've just updated my LR, but still can not read the new RAW files of my brand new Sony a6300. said 'impossible to read these files' is Adobe should update it program with new firmware to manage these new folders? Or something escapes me?

  You updated Lightroom to version 6.5? This is the version you need. What is the exact wording of the message you receive?

• How can I restore my Acer laptop running windows Vista to the factory specifications?

  I was given an Acer Aspire laptop. It is running Windows Vista with 512 MB memory RAM. It has been used and I want to try to restore it to the factory specifications. How can I do this? I tried system restore and it fails every time.

  Hello

  you have a very low amount of RAM to run Vista

  System Restore should not perform a recovery plant

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Acer is usually press Alt + F10 at startup to start the recovery process or through the Acer eRecovery Management under all programs

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Dell etc recovery disk

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• I am running Windows Vista SP2 Ultimate edition on my desktop and just upgrade to Windows 7 family premium, there will be a problem?

  Upgrade Vista 32 bit to Windows 7 32 bit

  You can't do it.

  You can only upgrade Vista Uptimate for Windows 7 Ultimate.

  Read more update on the link below:

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Doom 3 will not start on windows vista to the down loaded fine play and stop windows to the bottom of the computer has more than enough power to play any ideas?

  Inspiron 537 intel core 2 quad processor q9400 (2.66ghz1333mhzfsb) w/6 MB cache 800 mhz ddr2 2dimm 750 drive memory4gb hard nvidia ge force 9800 gt 512 MB gddr3 graphics card g card system windows vista Home premium

  do you have your suggetions not always some good if you or someone to think about anything else thanks to all

• get error message SCR ADE 4.5 E file is not found, the source file cannot be read.  Tried to withdraw approval of & re allow including factory reset and re load but still can not read the library on my Kobo Touch book.  With the help of Windows 10...

  Hi, when you try to read the book from the public library on my Kobo Touch I get error message SCR ADE 4.5 E file is missing could not read the source code.   I tried to remove and re downloaded from the website of the public library (no luck), I did the resets, including plate and re authorizing with the reset factory and re loading (no luck).  This problem started after the last update to 4.5 ADE unfortunately as before no problem.   If anyone has any ideas, would be appreciated.   Thank you.

  Try it work when you uninstall 4.5 and install new 3.0: the Adobe Digital Editions software downloads

• Hello. Need help. I have a nikon d750 and I want to do shots with LR 5.7.1. But LR can´t find the cam.

  Y at - it update? THX

  You need Lightroom 6.0/Lightroom CC 2015 (or later version) to attach the camera.

• Can not install the important updates for Microsoft Office ona HP laptop running Windows Vista Home Premium Service Pack 2

  Hello I am running Windows Vista Home on my laptop.  I have windows update set to download and install updates as they come.  I can't get my computer to update update of security for Microsoft Office Excel 2007 (KB973593)
  Update of security for Microsoft Office 2007 System (KB973704)
  or
  Update for Microsoft Office Word 2007 (KB974561)

  I get the error code 646.  I tried to install all three at once, one at a time and let the computer do as I turn it off.  None of them have worked.  Any help would be wonderful.  Thank you for your time.

  AnyaAlex

  You may have missed this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Whenever I try to use Windows Update, updates, most will fail and that the last time, I received this error code: error 80070664. I am running Windows Vista

  When you try to use Windows Update, the majority of the updates fails.  I get the error code 80070664.  I am running Windows Vista.

  Hi AirbnDoc,

  I suggest that run you the Fix It Tool to solve your problem. Here is the link to use it Fix Tool:

  http://support.Microsoft.com/kb/971058/en-us

  I suggest you to select two updates at once and the installation, if you are prompted to restart, then restart the computer.

  Disable all security software before installing the updates.

  Once installed, updates allow security software.

  Hope this has been helpful.

  Kind regards

  Bharath
  Microsoft technical support

• H have a computer that runs windows vista Ive had on the line using Xp professional, but it seems that I can't find a compatible driver for the audio card suggestions?

  I have a computer running windows vista that Ive had on the line running on the line with professional Xp but it seems that I can't find a compatible driver for the audio device. Ant suggestions? The Pc has a legacy, it's a Compaq laptop

  Hi morningstar410,
   
  -What is the brand and model of your laptop? Specify the same thing to help us find the right audio driver for you.
  -For which version of the operating system you are looking for the driver?
   
  Visit the following link and check if you download the drivers here:
  http://www.Compaq.com/CPQ-country/cpq_support.html
   

  In the meantime, follow the three steps solution given in the link below and see if this helps you.

  No sound in Windows

   
  Keep me updated on the status of the issue.

• MY computer is running Windows Vista Home basic I forgot MY administrator password when I try to reset the drive to reset Reset Wizard gives the message an error occurred trying to reset

  I running windows vista home basic I'm trying to reset my password using my reset disk and the wizard keeps returning the error message

  Hello

  You need to have a password reset disk until you fogot your password, not after that you forgot your password.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-password-reset-disk

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• How can I determine the name of my exchange e-mail server: I try to add an e-mail account. in Windows Mail, running Windows Vista on a Compaq Presario

  Here are the details:

  I have Windows Mail installed on my PC and you want to add an e-mail account.  The issue started when I was trying to send a document I had picked up on a website and received an error message there was a problem with POP3.  Then, I tried to set up an e-mail account and after that following instructions was puzzled because I didn't know the name of the exchange server.  I am running Windows Vista on a Compaq Presario.

  I first contacted my internet framework, which is Charter Communications and they referred me to Microsoft, which, in turn, was told to contact Charter Communications, call the Compaq or come to this site.  At this point, I'm a little frustrated.

  Hello

  If you are tring to add an e-mail account in Windows Mail, you get the settings from your ISP (Charter Communications), then follow the information from Microsoft on how to implement.

  You need the Charter:

  1. your username with them

  2. your password with them.

  3. incoming for them mail server.

  4. the outgoing e-mail server for them.

  Charter e-mail settings:

  http://www.myaccount.Charter.com/customers/support.aspx?supportarticleid=1417

  Then follow the steps to set up Windows Mail:

  "Windows Mail: setting up an account from start to finish.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  See you soon.