I am running winXP home on laptop wireless via a router, and I continue to have an effect on the net.

Similar Questions

• Laptop wireless with NETGEAR router Home Windows Vista detects on the local network and internet

  We have a laptop Toshiba Satellite L505-S6946 with Windows Vista on it. We bought a router Netgear Wireless G WGR614V10 a few months ago and installed ok. It worked fine for a few months. Now the network connection to the bottom rhs shows tray icon: 'Local only' for the connection of the SSID, we have implemented. Technical support Netgear has determined that the router works fine. But they noted that the router might get a static IP address in his settings of the adapter wireless Vista. And they said that something should be changed in Vista to a direct connection with the modem works fine for internet access, but it's bulky. Someone please do you suggest to fix this error? Thank you!!!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  Make sure that if there are teas from Wireless Utility of seller does not work with the native Windows wireless utility (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I can't uninstall Firefox. I tried my Add/Remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it won't work. Firefox is the only program that I am not able to uninstall u

  I am unable to uninstall Firefox. I have tried my add/remove programs and have tried the intsruction given to manually run C:\Program Files\Mozilla Firefox\uninstall\helper.exe. and it will not run. Firefox is the only program I am not able to uninstall using the normal methods
  

  This has happened

  Just once or twice

  today

  User Agent

  Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SIMBAR = {357DAD02-321A-4E1D-8305-C8CE3D8CA934}; .NET CLR 1.0.3705; .NET CLR 1.1.4322;. Media Center PC 2.8; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.4506.2152 .NET CLR 3.5.30729)

  I ' v tried running C:\Program Files\Mozilla Firefox\uninstall\helper.exe.
  It does not work.

• Telephone problems Wireless 2.4 GHZ WRT160N Ultra Rangeplus Wireless N Broadband Router and GE

  I bought the WRT160N Ultra RangePlus wireless N Broadband Router 2 weeks ago and the internet works excellent, but any when I make a phone call or make a phone call using the GE 2.4 ghz Cordless Phone my internet connection is very slow and drops end. I am able to recover the full Internet speed a few minutes later after I hang up the phone. What can I do to fix this?

  Any 5.8 or 6.0 will be fine.

• My wireless via a router disconnects completely and it is difficult to connect again

  My printer is connected to my computer via a router (D-link, DIR-655) en. When I try to use all the functions of my connection printer wireless disconnects tottaly and its very difficult to connect again. My computer can not find the network connection at all. After several time setting the router power on and off, the computer can find the network connection wireless and after that the printer works fine until the next time the printer again, same procedure repeated again.

  Oh, I don't think you want to connect your printer to the router with a USB cable.  There may be a link to troubelsome, you will only be able to print to it, analyzing him.

  Connect the printer to your router with an Ethernet cable.  After that go on each PC and delete all instances of the printer in Control Panel > printers (or devices & printers on Win 7).

  Then, add the printer in this way:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Problems with HP Photosmart C4380 wireless via a router from Cisco RV120W

  We recently purchased a Cisco RV120W wireless router and now we can´t connect our wireless Photosmart C4380 printer.

  During the installation process, we get the message: "the can´t computer communicate with the printer on 192.168.0.216. It can be caused by firewallproblems. Check that the 427 UDP port are not blocked in and out of traffic"(translated from Danish).

  If I remove the USB cable and try again, the installation continues and Announces: 'printer found – connected to the LAN' - but in the end: "Printer installation is not complete" - aurgh!

  The report-network printer looks OK all the way.

  Can someone help us we are frustrated.

  Greetings Jens Ove and Helge

  Sorry, but I'm not familiar with this device.  However, I would search in the areas of networks, VPN and security.

  You want to be sure of not having active VPN and also look for implementing isolation.

  This manual can help: http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf

• Have HP laptop running XP Home Edition. CD/DVD drive opens but is not detected. Could not locate the drive using option desktop and unable to read or write to drive.

  I had this happen once in the past.  Taken to a local repair center.  Found something in a recent windows update caused problem.  Deleted some item at the register.

  Hi vernanne,

  You can run the fix it from the link below and check off the results: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

  You can also check: your CD-ROM drive or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/982116

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise.  I tried two routes in vain.  I have the installation CD, there no AutoPlay.  I run Autoplay.exe in the root directory, I'm greeted, I ch

  I need help pass my Photoshop 7 from my old laptop to my new laptop running Windows 7 Enterprise. I have in vain two routes. I have the installation CD, it does not autoplay. I run Autoplay.exe in the root directory, I'm greeted, I choose English, I accept the EULA, I get the choice window Install / explores, with the install button already selected, click the button in Photoshop, CD towers, and nothing happens. In the 2^nd attempt I run Setup.exe in the directory of Photoshop and nothing happens at all the. I'm never even offered the opportunity to enter my product code. What should I do?

  There is probably a problem of compatibility between the old software and the more recent operating system.

• When running Vista Home Premium 64-bit. I disconnected and reconnected to my work programmes often... where calls interrupted

  I had my internet provider here at least 10 times in the last 2 weeks. They see no problem.  I gave my computer to Microsoft, he ran and saw no problem.

  But I still have questions!  Even online game (poker), you can see where it disconnects and reconnects repeatedly.

  Can any help...?

  Hi LoriBob,

  1. is the part of the computer from the domain?
  2. when the last time programs worked well?
  3. What is the type of internet connection you use?
  4. only happens to the programs or even disconnected Web sites?

  If this only happens with online programs, it is possible that some third-party programs installed on the computer is behind internet connection dropped.

  I suggest that you do check and clean boot, if it works.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on Start, type msconfig in the search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. on the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If the problem persists then you need to update the network adapter drivers on the computer by visiting the network card manufacturer's Web site will download and install latest driver update.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I returned to windows 7 on my laptop Acer 5253 10 Windows and I lost my network card driver in the process.

  * Original title: jake

  I returned to windows 7 Windows 10 on my laptop Acer 5253, apparently, I lost my network card driver in the process. I want to download a network card for a usb key to solve the problem, but I don't know how. I have no internet access on the Acer so I can't download directly. I not had a disc with disks on it to Acer, they came preloaded. I am running windows 7 pro on the Acer and Dell desk top on as I type. Can someone HELP me understand this? I am not at all computer savvy and need help.

  Using another computer, visit the ACER support for your computer and download the drivers for a USB.

• Factory reset N300 WIRELESS Cable Modem Router and now can't access the internet via a browser

  I have reset my modem/router to factory reset through my laptop to try to solve a problem. Now it will not allow Internet access through browsers at all, but I can still ping via the CMD prompt

  .. After a couple of hours trying to solve this problem, I solved the problem by logging into the router... tab basically fixed IP/DNS auto and back to auto settings once again... He was somehow glitches.

• I have a linksys wireless router and cannot get a full connection, I get the message - 'limited', or that the network keys do not match the linksys network who am I'm not fair?

  When I got the laptop - I was able to connect for about 3 days and then nothing - the yellow icon with the! inside he keeps display, or the router icon comes up - there is an internet connection availabe, but after going through all the steps to connect, nothing happens - my router works fine - I use it on another laptop and my desktop computer also works very well - different messages to arrive at different times on the problem. , but no diagnosis has been able to solve the problem.

  Hi Diane,

  In addition to the advice given, I would have you look at this article and check if the given steps help you correct the problem.

  Also, this might be handy in the future.

  Thank you!

• When I run Visual Studio, an error msg comes that States V.S. doesn't have permissions to read the registry template information.

  Here is a copy of the message... Could someone give me some simple, numbered instructions on how to change these permissions, just for Visual Studio 2012?
  Thank you very much
  Susan Alley

  E-mail address is removed from the privacy *.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

• Wired laptop but unable to connect to the laptop wireless wireless PC can connect cable PC OK

  I have a wired network on whiich, I connected a WAP54G access point for my laptop wireless to children. They are never anything other that connect to the internet, so I never noticed this before. Now, I bought my own laptop and that you want to connect from my main computer but the laptop is not visible on the network. I then connected directly on the laptop to the network wired through an ethernet cable, and it was visible from the wired PC as you would expect. Back fi he returned invisible.

  Does anyone have ideas, what could cause this behavior?

  Thanks for all your comments

  Presumably using your XP or Vista!

  You need to change network settings into the laptop to allow remote connections according to the directives of the wired connection.

  You will also need to make changes to the false firewall XP/Vista has as well.

  FYI: The WAP54G has no way to filter all network traffic, so the question is not to the AP.

  Concerning

  Fred

• I lost my BIOS password, how can I recover or change the password. I am running vista Home premium 64-bit

  I lost my password to access the bios and set up the screen. How to retrieve or change the password. I am running vista Home premium 64-bit.

  original title: I lost my password

  I lost my password to access the bios and set up the screen. How to retrieve or change the password. I am running vista Home premium 64-bit.

  Buna,

  We are forbidden to help you with the lost BIOS passwords. Contact the manufacturer.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  About questions about hardware BIOS password reset, we ask that you direct customers to the appropriate resources on the sites of manufacturers of equipment for the correct procedure.

  Please help us to ensure the safety of our community.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  The Revedere