I am the owner of everything on my pc I do not have the special permissions for individual files and I am denied access
permissions of origin title: special
I am the owner of everything on my pc I don't have special permissions for some individual files that I find quite strange. It also means that I can't delete some files. I tried to access the files when I started from a different hard drive, but still can not remove. While I followed all procedures to address this issue, I still do not end with special permissions. Is it possible to modify or delete the files from the MS DOS window or is there something that I am missing. I also found it seems to be an 'unknown user' in the permissions area, and when I try to delete or change this 'unknown user' and a second show. 1 then said who is denied access, but the other has access. No matter what I have I can not get rid of it! And file sharing is disabled disabled! Help, please
In Vista, many files can not even to administrators. Some are to protect the user from making mistakes (like many in the Windows directory and in your personal profile). Some are points of junctionhttp://msdn.microsoft.com/en-us/library/bb968829 (VS.85) .aspx which are there for backwards compatibility and should not be modified in any way (and certainly not deleted) or you may not be able to use your programs or may even damage the system to the point where it will need to be reinstalled). You shouldn't need special permits to delete a file if you have all the rights, but special permissions can block access and that's sometimes how it blocks even administrators. Keep in mind that XP administrators had access more than them in Vista - blocked is not necessarily a problem, but intentionally by developers of Vista.
However, if you're talking about files that you devriez have permission, then the following information about the ownership and permissions can help you.
To view your permissions, right-click on the file/folder, click Properties, and check the Security tab. Check the permissions you have by clicking on your user name (or group of users). Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions. You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).) Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.
To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights. Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab. Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK. Back and now there is a new owner for files and folders/player who can change the required permissions. Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.
I hope this helps. If this isn't the case, after return and we'll get the exact path of these files to make sure that you really can visit his profile and try adding special permissions. I suspect that the problem is that everyone is denied access and blocking everyone - but we'll check (if necessary).
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Tags: Windows
Similar Questions
-
How can I change the cursor in an individual account (and not the owner) a computer to my client?
How can I change the cursor in an individual account (and not the owner) a computer to my client?
Hi MichaelConner1,
You can keep the individual mouse for each user account on the computer.
Log on to each user account and then change the mouse pointer scheme using the link below and check if it helps.
http://www.Microsoft.com/enable/training/WindowsXP/pointerscheme.aspx
-
Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.
I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »
After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).
The restoration went well, restarted, but the problem persists.
Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.
The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.
The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.
It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.
On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.
The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.
Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.
However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.
***************************************************
Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?
Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.
This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.
So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.
Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.
* shrug *.
Computers.
-
I have a virus inches in my file and I lost all my files from the image. How can I get them back?
I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.
I have a virus inches in my file and I lost all my files from the image. How can I get them back? Folder was on the desk. So please help me. All files were very important for me. Thank you.
=====================================
Are you running Windows XP?Please post more details. The more information you share
you chances of a solution.How do you know it was a virus?
The virus has been removed?
When the problem happened everything first?
"Was" folder on the desktop? You say all
folder is missing?The file might be in the trash?
Is it possible that your files are still there but have
become hidden?Reach... Control Panel / folder Options / View tab.
... To check "Show the hidden files and folders" / apply / OK.If the photo thumbs reappear... they can turn washed
outside. To clear this up... right click a thumbnail or a
selected (highlighted) group or folder and the
menu... Choose... Properties, uncheck the box.
'Hidden' / apply / OK. -
On my user account on my labtop when I click on a program, such as mozilla firefox, it happens 'windows cannot access the specified device, path or file. May not be the appropriate permissions for access you point. "This message appears for firefox, AVG, Windows live messenger, windows MediaPlayer etc.
I can access my documents, Panel etc. and everything is there, but it won't let me not get access to the programs.
Also when I go to click on itunes and open office it happens "this file has no program associated with it for performing this action. Create an association in the set associations Control Panel.
Given that I was able to access control panel, I was able to create a new user and use it for now to send this message and all programs have worked on it and I was able to check for the presence of viruses on the Avg on this and everything was clear.
Could you please explain whats wrong and tell me how to fix this please: D thanks
Hello
1. don't you make changes before the show?
2. is the computer is joined to the domain controller?
You can not start any application on a client computer that is joined to the domain controller. When you try to start this type of application, you receive an error message similar to the following:
"Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item.This can also occur if the user account is damaged. If the computer is not connected to a domain controller, try the following steps.
1. connect to another user account and create a new user account to fix the damaged user account.
For more information about creating a new user account and the fixing corrupt user account, visit this link: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
Previous post the results in more detail, so that we can help you further.
I hope this helps.
Kind regards
Syed
Answers from Microsoft supports the engineer. -
How about you post that again without commas and maybe then I'll read it?
-
Question about the migration of mass of files and permissions
Hello
I'm moving 2TBs of files from one external hard drive to another, but every time that I try to do a file mass transfer from one day to the next it eventually fail due to permissions for some files. I looked at the files on that he objected and I read and write permissions on them, as you would expect.
What can I do to fix this?
Try to run repair permissions and ACLs on your record. A repair permissions with disk utility does not have anything in your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return. (Note: you won't be reset password)
Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.
-
The # is not my # send my security code. You have the wrong number on file and I need to access my account. How do I allow you to select the correct number or can I change my profile somehow and change the phone number so that you can issue a new security code, or determine what is my existing code. I don't seem to have a number 7 digits on file anywhere.
Thank you
George Sedlack
Please contact support for Microsoft Outlook, Mozilla has no relationship with Microsoft Outlook.
-
Where can I download the latest version of the Apple support for boot camp and Windows-10 64-bit software?
give me the link?
I need the latest package driver.
-Thank you
Please use BC Assistant.
-
I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?
Try the following. It seems yo may have to let the battery drain is completely:
- iOS: do not respond or does not light
-Also try DFU mode recovery mode post-test
How to put iPod touch / iPhone in DFU "Karthik doodles."
-If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.
-Try a different cable
-Try on another computer
S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.
-
I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there. I use a hdmi cable that has worked for me before. Any suggestions?
-
HP envy 14-2090eo: can I use the same drivers for windows 8 and 8.1
When I check in drivers which operating systems there are drivers available for my Hp Envy 14-2090eo, it says Windows 8 (64-bit) and Windows 7 (64-bit), "and im currently using Windows 7 64 bit" but does that mean the drivers to support these 2 Windows 8 and 8.1 of Windows operating systems, said in a different way "» : are the same drivers for Windows 8 and Windows 8.1?
Best regards from hpenvy1
Hello:
Your model has the AMD/Intel switchable graphics.
It is unlikely that the W8 AMD graphics driver will work on W8.1.
Normally, you can use some of the drivers W7/W8 on W8.1, but the graphics is very doubtful - not switchable graphics anyway.
You can run the windows 8.1 upgrade wizard and see what it reports.
http://Windows.Microsoft.com/en-us/Windows-8/Upgrade-Assistant-download-online-FAQ
-
my computer is the signature with a temporary profile and I can't access any of my files how to fix this?
Hello
Please post in the forums for your version of Windows.
Ask a question in a select Technical Forum here appropriate injector:
Microsoft Community - Forums
http://answers.Microsoft.com/en-usPlease provide all the information we need to help us help you.
How to ask a question
http://support.Microsoft.com/kb/555375=================================
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in
Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 - free methods system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty to a Vista - corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileDifficulty to a corrupt user - Windows 7 profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
When I click on a shortcut on my desktop I get a message saying that the file does not have a program assoiated with this file
Hello
These are shortcuts to Internet?
1. make sure that Internet Explorer is the default browser to the control panel > Add/Remove Programs > Set Program Access and Defaults, choose Microsoft Windows or custom. Make sure that IE is selected as the default browser.
2. on this page download and run the patch for files of the URL.
Difficulties of Windows XP file association:
http://www.dougknox.com/XP/file_assoc.htmDon
-
How to stop the pop-up for saving files when I start the computer?
I was going to save files on a drive of DVD-CD-R, but I decided to do not, how can I stop the pop-up for saving files when I start the computer? It keeps appearing even though I cancelled check?
* original title - cancel recording of dvd/cd-rw *.
Hello
Windows displays a temporary storage area where files are held before they are copied to the CD. Files or folders located in the temporary storage area are listed under files ready to be written on the CD.
Try the steps and check them off below if it helps:
a. double-click my computer and then double-click the CD burner.
b. under CD writing tasks, click on delete temporary files.
When you delete the contents of the temporary storage area, you can set this field to another set of files and folders that you want to copy to the CD. The files are not deleted from their location on your computer or on the CD.
Maybe you are looking for
-
Sky mail page is much too big for the screen. Help please
Sky have recently bud their e-mail page. The new page has extended much which means that the entire page is not viewable on the screen. It's really annoying and I would like to reduce the size of the page, but don't know how to do this. Can you help
-
Module 3G on Portege R500 with WinXP
Hello I am stuggling with a R500, equipped of the 3G module, on which I have installed XP SP2 from scratch: I downloaded the Vista drivers for the 3 G module, which seem to settle fine and then installed the SW. MobiLink but when I run it, the SIM ca
-
Click of the mouse stops working after you start the first application
Hard to explain this problem. First time I click on what either in an application after computer startup (Word, Excel, etc.) the arrow of the mouse moves, but the click does not, anywhere, not on the desktop, taskbar anywhere. Accentuates not delay
-
Techniques need more details 4250XL IPS and IPS-4255
4250XL IDS launched before the IPS technology, am I right? Can I deploy a 4250XL ID as an IPS, if yes, then it's true to upgrade this version IDS 4.1 to IPS ver 5.0 I add 4 10/100/1000BaseT ports on ID 4250XL. Because, I have to deploy IPS to 1 Gbps
-
Is the upgrade to Windows 7 'free' HP destructive?
Best Buy Geek Squad told me that the HP Windows 7 upgrade will totally wipe my hard drive and I need to reinstall and reconfigure all my programs and restore all my files. Is this true? It doesn't seem right to me... (Of course if I pay them to do,