I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

Tags: Notebooks

Similar Questions

  • CS5 Design Premium and recently bought a MacBook Pro with the retina display

    I have CS5 Design Premium and recently bought a MacBook Pro with the retina display. everything seems pixelated. Question: if I buy a large external screen for use with the product Adobe will always look pixelated?

    I can't answer that question, but I can say that CS5 is is no longer being updated for the new hardware and operating systems, so as far as I know, if you buy an external with the same kind of screen 'High definition' monitor you have now, you will have the same problem

  • MacBook Pro with the Retina Display 2015 screen goes green? Green tint and mist?

    Hello world

    I had this problem for quite a while now. My new Macbook Pro has worked great for a year. Now, after several updates which have me Safari freezes and crashes, and saw that the supported, there is a new problem.

    Whenever I open my Macbook to sleep or completely turn it on, it has a green tint / haze to it. The above is green, the sides of the screen are green. However, it disappears after 10 minutes. At the moment it is perfectly fine. The screen is the perfect color, it should be.

    Why does this happen?

    I have not dropped, spilled coffee or something like that. Sometimes I slide it clean with a cloth Microfiber, but very gently.

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management

    https://support.Apple.com/en-us/HT201295

    Subject of memory NVRAM and PRAM

    https://support.Apple.com/en-us/HT204063

    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?

    https://support.Apple.com/en-us/HT201262

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support

    https://support.Apple.com/en-us/HT201314

    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support

    https://support.Apple.com/en-us/HT204904

    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • Which side is the usb port 3 on a 2015 macbook pro with the retina display?

    Which side is the usb port 3 on a 2015 macbook pro with the retina display?

    I found the answer. It's the left side near the microphone.

  • Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

    Why I'm not able to see nvidia as a MacBook Pro with the Retina display graphics card

    MacBook details below?

    Model: MacBookPro11, 3, MBP112.0138.B15 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

    Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

    Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

    Memory module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

    Memory module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54343147533641465238412D50422020

    Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.15.166.24.3)

    Bluetooth: Version 4.3.6f3 16238, 3 services, 18 aircraft, 1 incoming serial ports

    Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

    USB device: Memory card reader internal

    USB device: USB OPTICAL MOUSE

    USB device: HUAWEI Mobile

    USB device: Hub BRCM20702

    USB Device: USB Bluetooth host controller

    USB device: Apple keyboard / Trackpad

    Bus crush: MacBook Pro, Apple Inc., 17.1

    Thank you

    gis_abc

    He seems to show NVIDIA graphics card.

    Kim

  • You just bought a 13 "MacBook Pro with the Retina display. What are some tips you have for me to make this thing last? It's my first MacBook.

    I just bought a brand new 13 "MacBook Pro with the Retina display (no, I didn't wait for the new version of 2016). It's my first MacBook.

    I'm looking for advice on what I can to make this last as long as possible. You guys have any advice for me of past experiences or knowledge? It will be greatly appreciated!

    Don't drink near him.  A spill will ruin the MBP and not be covered by the warranty.

    Treat the battery using these instructions from Apple:

    https://support.Apple.com/en-us/HT204054

    Ciao.

  • Flash Builder looks blurry on Macbook Pro with the retina display

    Hello

    Interface Builder Flash looks blurry on MacBook Pro with the retina display.

    Here is the screenshot:

    http://i.imgur.com/qMmmu.png
    

    Enlarge the image in actual size and notice that the interface of Flash Builder looks blurry.

    Please solve this problem.

    Andrey

    I had the same problem - could not believe my eyes on how horrible and blurry Flash Builder looked on my new Macbook Pro w retina.  Through she had suffered since last week and have just discovered this work around that someone figured out for Eclipse that also works on Flash Builder (guess b/c it is built on Eclipse).  Here is the link to the bug report that shows the work around (thanks to Brad Hudgeons):

    https://bugs.Eclipse.org/bugs/show_bug.cgi?id=382972

    Here is a cut and paste from the bug report in the case of the above url is deleted:

    Here's the workaround:  Do "Show package contents" on the Eclipse.app.  Edit Contents/Info.plist.  Just above     Place this:  NSHighResolutionCapable 
    

    Instead of Eclipse, display the contents of the package on Adobe Flash Builder 4.6.app.   After you change the Info.plist file, go to the Adobe Flash Builder 4.6.app and reproduce.  It will create an Adobe Flash Builder 4.6 copy.app.  Delete your original Adobe Flash Builder 4.6 and rename the Adobe Flash Builder 4.6 Adobe Flash Builder 4.6.app copy.app.  Then launch Flash Builder - you should see the text which is much clearer.  The graphics on the user interface are still unclear but at least the text should be crispy.

  • MacBook Pro 13 "Retina Display Usb Port does not... !!

    MacBook Pro 13 "Retina Display right usb port does not... I tried to plug in and out still it doesn't then I rebooted my macbook and again inserted the USB, it worked... !! Why this problem is caused? today is the 5th day since I bought my macbook... !! Also last night so he was working in final cut pro that freezes... the keys of my keyboard and trackpad it works do not totally got hung up... and then I pressed my power button after the restart, it was ok... Parachuting also does not work between my iphone and a macbook... say Bluetooth not connected to my phone eventhough after pairing... suggestions and advice? Help me please I am confused and worried... !! It's just the 5th day... !!

    Reset the SMC > reset the management system (SCM) controller on your Mac - Apple Support

  • I think to buy a new MacBook to replace my MacBook pro mid-2010, which still runs but becomes slow.  They say the current MacBook pro without retina display (which I don't think I need) is an old system and may be obsolete soon - true?

    I'm buying a new MacBook to replace my mid-2010 MacBook Pro 2.4 GHz Intel core 2 duo, 4 GB of memory, which always runs, but becomes slow.   I don't think I need retina display (if I have a lot of photos and films on the subject), but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?

    Barbara cfrompa says:

    but I was told that the MacBook Pro without screen retina was an old system that Apple could not support much longer. Is this true?

    Apple only can answer such a question, and the terms of use for these forums discourage us discuss what Apple plans to do.

    I too have a MBP 2010.  I installed an SSD and that increased performance.  Consider that as an option.

    You may experience other problems that slows down your MBP.  Before commit you the important cash for a new MBP, examine the potential software problems that may be responsible for the poor performance.  With the SSD, my 2010 works better than the day he came out of the box.

    Ciao.

  • MacBook Pro with the water damage...

    So my best friend brought the computer geek, a year 2011? (do not know exactly what year, unibody) MacBook Pro 13 inches. He had a kind of drink spilled on it and now refuses to start. This isn't the only thing however. I managed to clean the corrosion off him, and it looks clean. I tried to turn on after that, the fan refused to turn but the CPU radiator was deadly hot. The screen or my external monitor wouldn't recognize it. The other problem is that the magsafe adapter is glitching now. She charges for a minute or two, then fades to the orange Sun, then dim green. If I plug it into my MBA, let it load for a minute, then put it back on, it does the same thing.

    I unplugged RAM, DVD drive, trackpad, you name it. The only things attached are the keyboard and the fan. (also the HARD disk cable so the light of sleep will allow me I hope to know when it's on.) I have no idea what is wrong with it at this point. The real kicker is that the principal amount of corrosion was of about where the magsafe connector attaches to the main Board.

    One last thing. Even when the magsafe light is dimly lit green, the status lights of battery on the service side and tell me if he is in charge.

    Help, please.

    It could very well be a lost cause if there is damage to the system board.

    I'd give course to reconnect the RAM for general operations to run correctly.

  • Is it possible to sync with Macbook Pro with the iMac at home? If so, how?

    Most of the time, I need to exchange the data in my folder of documents between the iMac and Macbook Pro. I use a pen drive to do. I need to know if this Exchange is possible without the need of USB? both iMac and Macbook pro are on the same network.

    Verdier - saab

    Yes - you can use a cloud like iCloud service or OneDrive who will be the reflection of your files - in other words - iCloud exists as folder on your devices as well as on the Apple servers. For files that work you on the MBP are synced with the Apple servers and also update on your iMac, when both machines are on and connected to the network - oh-you don't have to be connected to the same network - as long as the two devices are connected to the internet - the update will happen

    OneDrive for Mac - FAQ - OneDrive - Office Support

    How to use iCloud for synchronization of files between Mac, style Dropbox - TNW Apple

  • Can I use macbook pro with the lid closed in target mode?

    Hello

    I wish I could use my iMac 27 (Lat) 2015 as monitor for my Macbook Pro (mid-2013) so that the Macbook pro is closed.

    Two computers use El Capitan

    Is this possible?

    Jim P.

    A 2015 27 "iMac does not support display mode of the target.

    Use your iMac as a display with the target - Apple Support Display Mode

    iMac (retina 5K, 27 inches, end of 2014) and the iMac later models can be used as target Display Mode displays.

  • MacBook Pro with the Retina display problem

    I put my 2013-model MacBook with Retina display to sleep and tried to turn it on the next day, but he had no answer. I've loaded and kept cool for about 8 hours, but the battery would not get full and it won't always turn. The next day, I continued to load and left for a few hours then disconnected it and in the night I tried again and quite normally on and nothing seems to be wrong! Any idea on what and why it happened?

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Can I use my MacBook Pro with the Display 27 "Thunderbolt

    My MacMini seems to have thrown a crisis of anger with El Capitan and I need to continue my work with my 2.4 Ghz Intel Core duo MacBook Pro (2008).  I see that I can connect the two wires into the side of my MBP but an empty black screen seems to dominate with no sign of life at all.  It is likely to please?

    TBD will only work if you have TB port on your laptop.  Your laptop probably has a mini port that looks the same, but differs based on display.

  • MacBook Pro with the letter N in white on my screen!

    Hello

    I have a strange problem and that there is persistent character display on the screen of my MacBook Pro.  It is located on the left side about 1/5th of the edge left and about 1/3 down.  It is white with grey background.  Anyone know what it is?  I've seen it before and it disappeared on the last update, but came back 2 days ago.

    Can you provide a picture and a screenshot?

    Screenshot for us a see if it's software or hardware, photo, so we can see what it looks like.

    Instructions on how to take a screenshot.

Maybe you are looking for

  • HP Envy 17 t-j100 Quad Edition: product number mismatch

    Hello! I'm about to upgrade to Windows 10 and have questions about my laptop.  By my initial order, the number of the product I ordered was E4S82AV, but the HP Support Assistant and the battery compartment that it is E1P14AV. When I touch E4S82AV in

  • How to test the update of the BIOS?

    Hello people, Yesterday when I looked through the TOSHIBA drivers I noticed that I have not updated the BIOS kit. I entered the download page and taken from there. Well, my mistake, I run the .exe (and I was running some word, winamp and two other ap

  • No name SIN

    My ReadyNAS NV + me served a long time, but now sometimes it will not be displayed in 'net view' or file Explorer. It is connected to my router Netgear D6200 Ethernet cable and address accessed via the LAN configuration using the router as a DHCP ser

  • Excellent data to table

    Hi, is it possible to capture a large amount of data in a table control? I have a large amount of data, which I am trying to get on the front panel of the LabVIEW interface. Thank you Andrea

  • Access denied: parental controls have blocked this application to run

    I downloaded a game and so far I have bought many games and I never had a problem with any of them, but this time I downloaded Family Feud 2 but when I try to open the game it gives me this message access denied: parental controls have blocked this a