I am trying to download internet explorer 9 for windows xp 32-bit, and it is said that he does not support what I have... Help please?
try to upgrade to IE 9 and I have windows xp, it does not support it... help please, says
If I switch to IE 9 then I need to upgrade to windows 7... and it is probably not a free update for 7
most likely, you will need to buy win7, before moving on to ie9...
How much memmory your pc in there?
I used a dell, Windows XP 32-bit, 4 GB memmory desktop pc, it works fine.
but, like you, when looking at upgradeing to win7 and because everything today is 64 bits and manufacturers is phaseing on 32-bit almost everything. I chose to tighten teeth to talk and go for win 7 64 bit and a pc with a motherbourd and a chipset that is not obsolete modern day after tomorrow.
Tags: Windows
Similar Questions
-
I didn't need a .mui file. Why did break it my shoes?
Use the following link to download IE8 for Windows XP.(1) sign in first class or click Download If you already.(2) check box on the a security update Cumulative for Internet Explorer 8 for Windows XP (KB2618444)It will download 2 files.First install IE8 and then Update.Done of security.It will be useful.Good luck. -
Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.
Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.Thank youoriginal title: I hope someone can help technophobeIt is said that there is something not working only not with the driver
You probably need to install some network drivers for your wireless card.
Download drivers
Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.
Update of the hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Establishment of a network domestic:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network
For more information network:
Start here to set up a home network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7
What do I need to connect to Internet:
http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet
Adding a wireless computer
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.
1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.
2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:
http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
Manually add a wireless computer
1. sign the computer.
2 open the connect to a network by clicking the network icon in the notification area.
3. choose the network wireless from the list that appears and then click on connect.
4. type the network security key or password if you are prompted to do so, and then click OK.
-You will see a confirmation message when you are connected to the network.
5. to confirm that you have added to the computer, follow these steps:
-Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.
-
can someone help me solve the following problem please? Error code: 0x80070005 is what appears when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)
Is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/last-mse-scan-was-two-weeks-ago-is-ok-whereas-my/05eba51d-95f6-4a5d-b313-da0994e57543
-
Update error 80070643 - Cumulative security code for internet explorer 7 for windows vista
Hello - I tried to download the update of Cumulative security for internet explore
7 for windows vista 6 times now and they all failedTo read the messages, 80070643 is a generic code. I tried
to restart the Office Source Engine (OSE) service & no luck is. Any
assistance you can provide would be greatly appreciated.I have vista home basic Windows, 6, 32-bit version operating system.
Thank you very much...
Sharon1124
Hi sharon1124,
Follow the steps mentioned below:
(I) read the article
You receive error code 80070643 0 x or 0 x 643, code error when you use Windows Update or Microsoft Update Web sites to install updates - http://support.microsoft.com/kb/958052(II) follow the article to reset the update components:
How to reset the Windows Update components? - http://support.microsoft.com/kb/971058(III) disable the security software
(IV) try to download the update manually and install it.
Thank you and best regards,
Abdelouahab Microsoft responds to the technical support engineer -
Morning Microsoft,.
I am facing a problem in my office environment (Windows XP SP3, Internet Explorer 7, software Trusteer report is NOT installed). We are trying to deploy a package to update all the post-SP3 XP critical and security patches and have problems with the update above.
We use the SCCM synchronized with our server WSUS software update to deploy updates and it works very well in most parts.
However this particular update appears to install (that is listed in Add/Remove Programs) However whenever the client checks for updates Windows he sees this as available, download, try to install it and indicates that a reboot is required... After a reboot, he's stuck in this cycle, each time that the client checks a Scan software deployment.
It was on our test PC at the moment we have so removed from our upcoming updates and aboard. Everyone knows this and they can advise?
Here are some excerpts from a newspaper of the customers on the update of the files
WUAHandler.log (ignore the stop bits listed here update that installs very well)
Async completed research. WUAHandler 29/08/2011 09:55:58 6128 (0x17F0)
Successfully completed the scan. WUAHandler 29/08/2011 09:55:58 1788 (0x06FC)
Go to search using the WSUS update source. WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
Synchronous looking for all the updates started... WUAHandler 29/08/2011 10:04:29 6032 (0 x 1790)
Synchronous successfully looking for updates. WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
1 update: 5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
Update: dfec6275 - 7 d 47-4da6-bcee-d4f20e57acee, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
2 update: 5f08af04-7832-452f-9206-4289ed36f1b4, 102 BundledUpdates: 1 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
Update: a9278996 - 22 c 7-4f60-9bd3-540d291c4bfd, 102 BundledUpdates: 0 WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB980182) (5bf6aa01-2591-4966-95a6-afa7b5b6ac68, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
2 update (Missing): update rollup for the ActiveX for Windows XP (KB2562937) stop bits (5f08af04-7832-452f-9206-4289ed36f1b4, 102) WUAHandler 29/08/2011 10:06:02 6032 (0 x 1790)
Async updates installation has begun. WUAHandler 29/08/2011 10:06:10 6032 (0 x 1790)
Update 1 (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) completed the installation (0x00000000), reboot needed? Yes WUAHandler 29/08/2011-10:06:34 6060 (0x17AC)
Update 2 (5f08af04-7832-452f-9206-4289ed36f1b4) completed the installation (0x00000000), reboot needed? No WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
Async completed installation. WUAHandler 29/08/2011 10:06:43 5272 (0 x 1498)
Installation of updates is complete. WUAHandler 29/08/2011 10:06:43 3184 (0x0C70)
Async updates using WUAgent search began. WUAHandler 29/08/2011 10:06:43 6032 (0 x 1790)
Async completed research. WUAHandler 29/08/2011 10:07:51 5740 (0x166C)
Successfully completed the scan. WUAHandler 29/08/2011 10:07:51 4644 (0 x 1224)
Update (5bf6aa01-2591-4966-95a6-afa7b5b6ac68) has completed the restart of the post operation. HResult: 0 x 00000000. WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
Async updates using WUAgent search began. WUAHandler 29/08/2011 10:37:03 2676 (0x0A74)
Async completed research. WUAHandler 29/08/2011 10:40:29 3628 (0x0E2C)
Successfully completed the scan. WUAHandler 29/08/2011 10:40:30 5636 (0 x 1604)
Go to search using the WSUS update source. WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
Synchronous research began using the filter: "UpdateID ="7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe"AND DeploymentAction = *'...» WUAHandler 30/08/2011 09:26:57 3848 (0x0F08)
Synchronous successfully looking for updates. WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
1 update: 7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102 BundledUpdates: 1 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
Update: a7c0649d-f81c - 40 c 1-b247-b4e6bb990c8a, 101 BundledUpdates: 0 WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
1 update (Missing): Cumulative Security Update for Internet Explorer 7 for Windows XP (KB2559049) (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe, 102) WUAHandler 30/08/2011 09:27:07 3848 (0x0F08)
Async updates installation has begun. WUAHandler 30/08/2011 09:27:15 3848 (0x0F08)
Update 1 (7e4ee2a6-96ca-43e6-ad06-f4ecab6441fe) completed the installation (0x00000000), reboot needed? Yes WUAHandler 30/08/2011 09:27:39 1656 (0 x 0678)
Async completed installation. WUAHandler 30/08/2011 09:27:39 5840 (0x16D0)
Installation of updates is complete. WUAHandler 30/08/2011 09:27:39 3848 (0x0F08)It is a forum for specific consumers. You will find support for WSUS in this forum: http://social.technet.microsoft.com/Forums/en-US/winserverwsus/threads
=======================
You can encounter errors related to connect temporary [p. ex. 0x80072EFF; 0x80072EFE;] 0x80072EFD; 0x80072eef; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0X8024402F; 0x800705B4] when you use Windows Update or Microsoft Update [but not necessarily WSUS! ] to install the updates
http://support.Microsoft.com/kb/836941 -
Tried to install the update Cumulative security for Internet Explorer 9 for Windows Vista (KB2809289) and it failed several times. Error details: Code 8E5E03FA. Tried to disable the firewall and antivirus, nothing helped, also tried to download the update and install it in safe mode, did not help as well. Tried to run Microsoft Fix It, luck is. Can anyone offer any help with this?
Boris
Boris
I had problems too with IE9 and it's updates... as you say all the other updates work I don't think that the Windows Update the question... is IE itself... IMHO...
For days, I was getting the BSOD and it became progressively worse as the days passed... Now, I have all stable and works very well yet.
If my suggestion for you is what I did... sort the problem at the source the progam in other - IE there is a form of corruption imho.
First download and save IE9 to your download folder make sure you have the correct version, for example English Vista 64-bit
Uninstall the current version... you may have to restart... I suggest you only do it anyway... It is cleaner that way. Then reinstall IE. I suggest that you set up with as few add on the as possible and add them at a later date, as and when you need it, preferably one at a time.
Once you have reinstalled IE and restarted the kickoff of Windows Update If you have not automatically set to run... and I think that it will update the update of security OK.
Good luck - let me know
-
Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)
I've read other discussions on error code 80242FFF. Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit. Also, I started my computer in mode safetboot and tried to update.
They did not work. So, will you be able to help me find a solution?
Thank you
Ken
Hello
1. is that the copy of windows is enabled?
2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?
I suggest to perform the steps in the following article and check.
Method 1: run the Windows update troubleshooting tool and check.
The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/
Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.
To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below for more details:
How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
http://support.Microsoft.com/kb/929135
Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.Method 3: If the problem persists, follow the steps in the following article.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note:
un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ( )
How to back up and restore the registry in Windows
b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
For reference:
0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
http://support.Microsoft.com/kb/946414
Note:
un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ( )
-
KB2675157 of a security update cumulative for Internet Explorer 8 for Windows Vista fails to install
Maintains a security update cumulative for Internet Explorer 8 for Windows Vista (KB2675157) do not install - tried "fix it" and that did not work - any ideas?
Hello
1. don't you make changes on the computer before the show?
2. what difficulties did you try?
3. do you get an error message?
4. are you able to install some other updates?Method 1:
You can perform a clean boot, and then try to install the update and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
Method 2:
Try to manually download and check.
Update cumulative security for Internet Explorer 8 in Windows 7 (KB2675157)
Also check the link for more details.
MS12-023: for Internet Explorer Cumulative security update: 10 April 2012
http://support.Microsoft.com/kb/2675157
Method 3:
If the problem persists you can try the procedure described in the supplied knowledge base article and check.
Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryWARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive. -
I am running Vista/32 SP - 2. 2 updates fail - update security for Windows Vista (KB2598479) and updated security update Cumulative for Internet Explorer 9 for Windows Vista (KB2675157). Downloaded and run Fix - It. If the following message in the report - 'fix default locations of Windows Update does not work. Wouldn't have known if I had not watched the details of reports since Fix - It said that everything had been fixed. I tried to run Windows Update and Fix - It with the "run as Administrator".
The suggestion of more optimistic that I see out there is reset the Windows Update components, but I have not been able to find out how to do this.
I try next? Thanks for the help!
Hello
1 did you change on your computer before this problem?
2. what difficulty you are referring to?
You can follow the suggestions and then check.
Method 1
You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821Method 2
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 3
Step 1:
Place the computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Step 2:
Download and install the updates manually.
Update security for Windows Vista (KB2598479)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28605
A security update cumulative for Internet Explorer 8 in Windows Vista (KB2675157)
http://www.Microsoft.com/download/en/details.aspx?ID=29357&WT.mc_id=rss_alldownloads_all
See also:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
You cannot install some programs or updates
-
A security update cumulative for Internet Explorer 9 for Windows Vista (KB2559049).
Hello everyone, yesterday I received many updates to install via windows update. All have installed outside of a Cumulative security for Internet Explorer 9 for Windows Vista (KB2559049). I downloaded the update manually and tried to install it but still the same problem. When you restart the computer, the update fails to configure correctly. My operating system is Vista 32 bit. Any suggestions would be greatly appreciated.
Thanks to OwtForNowt, another Member,
I could solve the problem of the painful KB2559049 update.
If as this same problem and they also Trusteer report installed on their system. Uninstall, reboot your system, check the updates with windows update and try to install KB2559049 and if your lucky like me your see that long-awaited complete message of 100% of configuration and installed updates.
Good luck.
Thank you all for your help and solutions to this problem.
-
I can not install the patch update Cumulative security for Internet Explorer 9 for Windows Vista (KB2530548). I am running Vista Home Premium. I tried to remove and reinstall .net framework and finally attempted to unistal ie9. Not only it did not work but since try, I have updated Security Essentials caraa. I am also unable to install the update for Windows Vista (KB2533623).
This issue coincides with Ecel who stops working and I uninstalled Office 2007 Professional.
Can someone help me (to uninstall ie9 or install the update that links my computer every day)? I tried twice to unistal ie9 and whenever I restart the nachine it shows that ie9 has just been installed.
Hello
· Have what measures you tried to uninstall Internet Explorer 9?
· What is the accurate and complete error message?
I suggest you follow the steps below:
Check which version of Internet Explorer is currently installed on your computer follow these steps in the link:
Method 1:
Download and install updates manually follow the link to download updates:
If you are using Internet Explorer 8 and then, I suggest you to download and install 2530548 KB
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26246
Note: this above KB is applicable to Internet Explorer 8.
For Ko 2533623
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26757
Method 2:
Not one:
Windows open day convenience store, follow the steps in the link below:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter
Step b:
Follow the steps described in the article below solve the problems with the installation of the updates:
http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
Refer to the link mentioned below to uninstall Internet Explorer 9:
http://Windows.Microsoft.com/en-us/Windows7/how-do-i-install-or-uninstall-Internet-Explorer-9
-
I tried to download this update for over a month, but every time I try it fails. I get this error code:
A security update cumulative for Internet Explorer 8 for Windows Vista (KB978207)
Installation status: failed
Error details: Code C 8007371
Update type: Important.
Can someone please help me I would be very happy! Thank you!
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
I get this code each time I have run windows update Failed: 1 update "CODE 80070020 Windows update encountered an unknown error" I checked updates and it's the one he keeps failing update: Cumulative security update for Internet Explorer 8 for Windows Vista (KB2360131)
does anyone know how can I fix?0 x 80070020-2147024864 STIERR_SHARING_VIOLATION the process cannot access the file
because it is being used by another processOther people may have additional ideas for you; I hope this helps a little, take a look at this
You receive a "0 x 80070020 the process cannot access the file because it is being used by another process" error message when you try to download an update from Windows Update or Microsoft Update http://support.microsoft.com/default.aspx?scid=kb; EN-US; 883825>
-
A security update cumulative for Internet Explorer 8 for Windows XP (KB2183461)
A security update cumulative for Internet Explorer 8 for Windows XP (KB2183461)installation fails every time.Guard appears as a critical update will not yet installed the patch.I have XP with service pack 3.I downloaded from a separate source located on a USB key and it does not this source either. source of untrusted error.Hi AKharold,
1. that you get any message or an error code when the installation fails?
We recommend that you install the stand-alone file of this update and check the result. If the update fails, then post back the exact error code.
Step 1: Install the standalone file of the update in safe mode
a. download stand-alone file of the update:
http://www.Microsoft.com/downloads/details.aspx?FamilyId=bc949915-4E16-4897-A295-2f99102548ab&displaylang=en
b. save the file to the desktop and start the computer in safe mode
See http://support.Microsoft.com/kb/315222/en-us
c. log in as administrator and open the downloaded file to install it successfully.
d. Once you have installed the update, restart the computer.Step 2: If step 1 fails, check windows update log file to find the error
a. see http://support.microsoft.com/kb/902093
b. retrieve the code error and after return details.Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
I lost the top bar with my file and edit with cut, copy and paste functionality
I lost the bar with the following functions: file, edit them with cut, copy and paste
-
WMS5316 impossible to ad WNDAP350
Hello I saw the following on my WMS5316 problem: When I try to add a new WNDAP350 I have the following message: Only 16 allowed in the list of managed access Points I have only 10 AP listed in use, and which corresponds to my network configuration is
-
How to load Windows "On-screen keyboard" application using LabVIEW
Hello If someone can tell me how to load windows "On-screen keyboard" application using LabVIEW. Kind regards Bharath
-
I use peoplepc. Their address list is in cvs format. I can't find a change it so I can print. Mel
-
Windows Defender won't let me to open the startup programs
Hello, I have a Vista ultimate on my computer. I use Norton Security. I want to delete some startup programs. Go to the Control Panel, clicking Startup Programs - Windows Open saying that Windows Defender is disabled... I click on the link to activat