I am trying to install windows XP Professional. Installation stops with error "0x0000007b".

How to install Win XP on PC with intel i3 processoe running win7

Hello

I'm working with a legacy system. My programs to work with Windows XP and more excellent only.
Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.
I am trying to install windows XP Professional. Installation stops with error "0x0000007b".
The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.
Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.
Can someone help?
Advertisement

Hi Steve,.

You can follow this link & check if the problem persists:

Error message "STOP 0x0000007B" when you restart your Windows XP-based computer


Reference:
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

If the problem persists, please ask your question in the TechNet forums for assistance.

Hope the helps of information.

Tags: Windows

Similar Questions

  • I am trying to install Microsoft FSX and it stops saying error 1607 unable to install "installsheildscriptingruntime".

    I have recently reinstalled windows vista on my asus cube made all RPG updates defrags

    I'm trying to install microsoft fsx and it stops saying error 1607 unable to install "installsheildscriptingruntime".

    IV tried to use the help but no joy help please

    Hello

    Thank you, I ran a microsoft fix - it program and it worked now I loaded my flight sim fsx

    and works very well, thank you for your help

  • Windows 2008 SP2 installation failed with error code 0 x 80041002

    Hello

    I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.

    I tried the steps in http://support.microsoft.com/kb/947366:

    1 uninstalled antivirus.

    2. install KB947821 analysis tool

    3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

    Without success. What should he do next?

    Thank you

    Frank

    Hi Frank_673,

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.

    Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message "Windows cannot be installed on this computer" when trying to install Windows 7 Professional on laptop HP Envy 4 comes preloaded with Windows 7 Home Edition basic

    I bought a new hp envy 4 portable that this laptop is coming with the preload windows 7 Home Basic when I try to install windows 7 32-bit professional, but when it is copied all of the files at the end of the installation of finishing it showing error message that windows could not be installed on this computer hardware. Please suggest the best solution.

    Thank you
    Vishal

    Have you tried using Anytime Upgrade?

    If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  • I am trying to install Windows xp professional from the CD without key

    I got HP long before and as I intall it. He asked to insert the key which is on my CPU but key sticker is scratched. I have now a key. What I would do.

    Please give me help.

    If you have no productkey you will not be able to install Windows XP.

    You can try to contact Microsoft and see if it is possible to get the key, or if there is anyway you could maybe get a new key.
    Contact information to Microsoft.
  • I am trying to install Windows 7 and I get the error code: 0 x 80070017.

    I tried for months to install Windows 7 and I get the same error message.  In fact, I gave up trying, but my computer is running slowly and gel a bit so I thought I would give it another chance.  Can you help me?

    See if this post will help you: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-7-installation-error-code-0x80070017/2ea19373-2b4a-47e7-8584-04c6966589c3

    J W Stuart: http://www.pagestart.com

  • Cannot install Windows 7 Professional. Problems with partitions.

    I have a problem installing WIN 7 Pro, I think that I managed to install a re - install Win 7 ultimate disc that came with my DELL laptop. As the disc, I guess that for a single use, something happened to prevent its use. Unfortunately I cannot start my new Zoostorm ACPI x 64-based PC successfully because windows will in the repair attempt, but can not correct now.
    When I load the new Windows 7 pro, I get that, where you want to install windows, where
    Disk 0 Partition 1, total size: 100MB. Free space: 78MB; Type: SC (reserved). When click on format gives the warning: the partition might contain recovery, system files or software files important computer manufacturer you. If you format this partition, all data will be lost.
    The detail shows: Windows cannot be installed to this hard disk space. Windows must be installed on a partition formatted in NTFS.  Windows cannot be installed to this hard disk space. The partition is a partition of EFI (ESP) system.
    Disk 0 Partition 2; total size: 128 MB; Free space: 128 MB; Type: SC (reserved). The warning on this is: Windows cannot be installed to this hard disk space. The partition is a partition MSR (Microsoft Reserved).
    Disk 0 Partition 3; total size: 698,4 MB; Free space: 670MB; Type: primary. The warning on this is: the partition might contain recovery, system files or software files important computer manufacturer you. If you format this partition, all data will be lost.

    On the three I haveoptions: Refresh; Delete; Format or load drivers.

    I think I can segment the readers already, so don't want to do it again.
    I can't start windows successfully, cannot use the update option.
    If you have any ideas on this one I would be most grateful. Best regards Steve

    Yes, you must delete all partitions, this will ensure that you will be able to start a clean slate with Windows 7 Professional.

    How to determine if your motherboard supports supported EFI:

    http://www.tested.com/news/feature/articles/2895-how-to-check-if-your-PC-is-UEFI-ready-for-Windows-8/2/

  • Trying to upgrade Windows 7 Professional edition, but make error "the application cannot find one of its required files, possible because he was unable to create it in the folder".

    I'm trying to update Windows Professional and the following error message keeps appearing in the "application cannot find one of its files required, possible because he was unable to create it in the folder.  Please make sure that the folder in which this application was downloaded is accessible and not readonly.  Can someone tell me what to do?

    Hi Bill,

    Please take a look at the thread similar here, thanks to a possible correction.

    I hope this helps!

  • I am trying to install Windows XP SP3, but get the error number: 0 x 80244019

    I followed all the instructions on the solutions provided, the fix for me did not work and the patch it seems to work (in other words, some of the settings needed to be changed), but when I tried the update for the gazillionth time it still does not work.  I have an old computer HP Media Center - could that be the issue?  It is a circular, thorny problem because I need to update my browser as well, but some of these commands do not work because I have not installed SP3.  Ugh.  What other options do I have? This all started because I had to run the recovery after a crash. I guess that he put everything back to factory default.

    I also download errors when I tried the advanced download SP3 which says [1] KB936929-SP3-X 86 - ENU .exe is not a valid Win32 application...

    Thanks, I had already tried that and it didn't work, but then I saw a tip in an other thread trying to install using another browser.  Once I swithced to internet explore for Google Chrome download worked!  Hallelujah.

  • tried to install windows 7 on a laptop with windows 8

    When it restarted I State 0xc0000428 can't seem to boot from the dvd enter key esc f1 - 12 etc. doesn't work is not basically cant do anything other then go on the status screen at startup

    You will first need to go to the website of manufacturers for your model computer and first find out if there are native drivers in Windows 7. A large number of computers that are preloaded with Windows 8 have no native driver support for Windows 7 by the manufacturer. If there is no native driver, you will need to consider returning the machine and buying a machine preloaded with Windows 8 Pro with downgrade rights to Windows 7 Professional. Or look through the catalogue of manufacturers for systems already preloaded with Windows 7, usually the business sector will have these options.

  • Window update KB2719177 installation failed with error code 80092004.

    When my computer tried to install the KB2719177 update of Windows, installation has failed several times with an error code 80092004. Please advice.

    Hello


    You can run the system update tool and then try to install the update. Read the following article.
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821
    See also:
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997
    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,
    http://Windows.Microsoft.com/en-us/windowsvista/back-up-the-registry
    Warning of CHKDSK
    Important
    : when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
    Note: Make sure that you back up the data before proceeding with the disk check.
    For more information about how to back up and restore the registry, follow the steps from the following link:
    Back up the registry
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  • Cannot install Windows Update KB947821 KB2770660 KB2761465 with error code 80073712 / 8007371c

    Original title: cannot install KB947821 KB2770660 KB2761465 version November 2012

    Hello

    Because it was offered as part of a 10 part windows update a few weeks ago I have not been able to get

    KB947821

    KB2770660

    KB2761465

    Versions of November 2012 to load on my machine

    tried all software "fix it" off site, separate download of the site Web and cleaning facility.

    Tried all the option that I can find for similar problems on the forum too.

    nothing seems not to work

    Vista SP2

    Any help would be welcome.

    TIA

    Mark

    Hi Mark,

    Thank you for your response.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    Please follow the methods below according to your error code and check the issue:

    Method 1:

     

    Follow the steps in the link below.

    Windows Update error 80073712:

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712

     

    Method 2:

     

    Follow the steps in the link below.

     

    You receive the error code "0 x 80073712" or the "Windows features" dialog box is empty when you try to install the updates or components in Windows 7 or Windows Vista:

    http://support.Microsoft.com/kb/931712

    Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

     

    Method 3:

     

    Follow the steps described in the links below.

     

    How to get the latest version of the Windows Update Agent:

    http://support.Microsoft.com/kb/949104

     

    Information for network administrators about how to obtain the latest Windows Update Agent:

    http://support.Microsoft.com/kb/946928

     

    Method 4:

     

    Follow the steps in the link below.

     

    How to reset the Windows Update components? :

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

     

    Method 5:

    Follow the steps in the link below.

     

    Error code 0 x 80073712 occurs in Windows Update or Microsoft Update:

    http://support.Microsoft.com/kb/957310

     

    On-site upgrade warning:

     

    Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

     

    Let us know the State of the question, if you need help I'll be more than happy to help you.

     

  • I bought Lightroom 6 for MAC somw earlier. Now, thanks to a system remains, I can't install LR6 more. Installation stops with an error message: The Adobe Support Advisor was discontinued the Adobe Support Advisor tool served to ana

    Does anyone have an idea what to do?

    Thanks in advance

    If the error mentions the installation program was unable to initialize:

    start at the top and work your way down to apply applicable patches until your problem is solved.

    If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

    If your error is:

    "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

    first of all, rename folder OOBE OOBE.old.

    to find the OOBE:

    Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

    Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

    Mac os: HD > library > application support of > adobe > caps

    Mac os: USER > library > application support of > adobe > OOB

    If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

    If you use an installation dvd:

    Copy the contents of the drive in a desktop folder and install from this directory.

    If you are using a mac:

    1. try to create a new user account in Mac with administrator privileges.

    2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

    3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

    4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

    5 restart the installation.

    If everything is applicable above fails, check your Setup logs:

    http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

  • Error code 80070570 0 x when trying to install Windows 7 Pro 64-bit

    Original title: Windows 7 Professional 64-bit

    Brand new OEM copy 1 stick 4 GB DDR3 1067 new motherboard & processor Intel Celeron G530 @ 2.4 GHz dual core EMT 64 taken in charge brand new DVD/CD drive nothing attached to the computer but monitor, mouse & keyboard

    I am trying to install windows 7 Professional 64 bit on a new hard drive.  He does it very well until it gets to the expansion of the files.  It is about 28% & then gives me an error code 80070570 0 x and says some files are missing.  I tried to re start several times.  He always stops here.

    Try reinstalling the memory stick into the slot in the motherboard.

    Then run memory test software against the installed memory. Memtest86, for example. Let it run all night.

    http://www.Memtest86.com/

    Tom Ferguson

  • While trying to install windows updates, I get an error 57F Code - Windows Update encountered an unknown error.

    For months, that I tried to install windows updates and continually get 57F error Code - Windows Update encountered an unknown error.  I'm now 9 updates important and 2 Optional updates that have failed to be updated.  I am running Windows Vista Home Premium. Help, please!

    Office 2007 are in guess some updates.

    1. ensure that you are logoned on with an administrator account and that the computer can access the Internet properly.

    2 - Insert the Office 2007 CD drive of the computer installation CD, then check if updates Office can be installed.

    Did you use a registry cleaner?

    TaurArian [MVP] 2005-2010 - Update Services

Maybe you are looking for

  • In FF10.0 irrational UI behavior

    Update: always check each addon, even when they do not change the user interface. Disconnect Facebook screwed up my UI for no reason. After updating Firefox automatically to version 10.0 area superior to the user interface (menu button, tabs, address

  • iTunes on my 2008 iMac won't work.

    When I try to open iTunes on my 2008 iMac, it opens for 1 second then closes the window and the program. Should I maybe just consider to Apple?

  • Is it right to TrustedInstaller to have the property full on everything in WinSXS?

    Recently had an anti-virus program quarantined files of false positives in the WinSXS folder. In order to restore them, I had to take possession of its default owner, TrustedInstaller WinSXS. Long story short: I took possession of WinSXS and all subf

  • Why can't sign services of the Xbox on my PC?

    I have Windows 8 Pro and until recently my Xbox Gold subscription expiration date, I couldn't access my applications. Now, I can't.Applications I have problms with are: Mail, video Xbox, Xbox Music, smart glass Xbox, games, shop and all Xbox Live gam

  • employee share ownership plan "turnaround."

    I am trying to decide to purchase a plan of adobe stock. What is meant by "Turning up to 120 images" in the 10 images per month plans?