I am trying to run windows update, but it will not work.

Similar Questions

• I try to run windows update and it will not update gives error code 80070005

  I try to run windows update and it will not update gives error code 80070005, I also ran fix and it tells me that it is fixed but it is not getting the same error code when I try to update after running it help please?

  Hello

   
   
  
  1. which Microsoft Fixit did you?

  2 have you installed new hardware or software before the show?

  3. who is the antivirus installed on the computer program?

  4 update you are trying to install?

  5. are you logged on as administrator on the computer?

  
  If this isn't the case, I suggest you to log on as an administrator and check for the issue.
   
  Method 1:
  One of the other reason for the 80070005 error is caused by software running on your computer security.
  Temporarily disable the security software on the computer and see if that makes a difference.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Method 2:
  I suggest you perform the steps described in the article:
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003
  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates. I suggest you to follow the steps and check if it helps.
  
  Method 3:
  Perform a clean boot, and then check if it helps.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  
  See also:
   
   
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
   
   
   
  I hope this helps.

• Windows Installer keeps trying to install msi.status but it will not install

  Windows Installer keeps trying to install msi.status but it will not install and I think he got the other updates to the installation.  How difficult or get rid of it?

  Hello
  In my view, that it is a software HP printer problem. Please, try the following:

  If you have the HP software on your PC support (printers, etc.)
  the disc when the pop-up window displays a location '1'. Click Browse
  then open the HP disc in the CD drive. A named icon status should
  appear. Click on this icon and load. This will get rid of the
  Status.msi loop.

  If you do not have the original disc. Uninstall HP Photosmart all-in-One Driver software and HP update program - then only reinstall the HP Photosmart all-in-One Driver software. Do not update, just live with it. The web link for the full features of the software download is provided below.

  http://h10025.www1.HP.com/ewfrf/wc/s...duct=320478 5

  I hope this helps Mark <> Microsoft Partner

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• I have a G5 PowerPC running (non-Intel) 10.5.8 I tried to load my PS7, but it does not work on this system. What is the oldest Photoshop I can install?

  I have a G5 PowerPC running (non-Intel) 10.5.8 I tried to load my PS7, but it does not work on this system. What is the oldest Photoshop I can install?

  Hi Jeff, please see the Photoshop here system requirements: https://helpx.adobe.com/photoshop/system-requirements.html#main_Older_Versions

  Looks like CS3 can operate.

• I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success.

  I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!

  There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.

  1. download the file of configuration Flash from here:
  
  Adobe Flash - Plugin version.
  
  Save it to your desktop.

  2. close Firefox using file > exit
  
  Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
  
  {XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}

  3. then run the Flash configuration from your desktop file.

  4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/

  • On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).

  See this:
  
  http://vistasupport.MVPs.org/run_as_administrator.htm

• I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears

  Original title: I have windows xp.  What does "drive not valid error 1327: J:\. "means and how to fix it?

  Hello

  I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do.  I didn't know that there was such a unit, because I can not find it. I hope someone can help.  Thank you.

  Hello

  1. are you able to download another program?
  2. you have any program installed download accelerator?
  3. what browser do you use?

  Read the following article that may help you resolve this problem.
  Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
  http://kb2.Adobe.com/CPS/404/kb404946.html

• I reinstalled creative cloud and Dw after having a problem with Windows 10, but they do not work after restarting my computer. It's as if they are not installed

  I reinstalled creative cloud and Dw after having a problem with Windows 10 and I restored it to windows 7, but they do not work after restarting my computer. It's as if they are not installed.  I worked through all the steps without result troubleshooting.  Everyone experienced similar?

  Hi Trickstar777,

  Please follow the steps below:

  • Please check if you have installed browser security extensions, please disable them. (For example: AD BLOCK, Advisor to Mcafee website, toolbar of internet security etc.)
  • Disable the firewall on your machine.
  • Turn off the firewall of the security program installed on the computer Internet. (Norton 360 - disable the following in it: Surf safely, firewall, browser protection, download intelligence)

  These changes are temporary you can restore these changes back to normal once your creative cloud application is in place and functioning *.

  (1) uninstall Creative Cloud Desktop Manager:

  Using creative cloud | Uninstall the creative cloud desktop application

  (2) delete following folders: (if you do not see any folder skip this step)

  C:\Program Files (x 86) \Common Files\Adobe\OOBE

  C:\Program Files (x 86) \Common Files\Adobe\Adobe Application Manager

  C:\Program Files (x 86) \Adobe\Creative Cloud files

  C:\Users\\AppData\Local\Adobe\ MAA UPDATER and two OOBE (App data & Program Data is folder hidden please see, Show files and folders hidden in Windows 7, 8.x, 10, or Vista)

  \Adobe\ DONNÉES C:\Program rename SL-STORE like SL-STORE_OLD

  3 - Click on the link below and download Creative Cloud Installer file and use them to install the creative Cloud Desktop application.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

  Let us know if that helps.

• I have Photoshop CS4 and I need to reinstall CD after a computer crash and reinstall Windows 7, but it will not be reinstalled I think because he used to completely uninstall. Can anyone help?

  I have Photoshop CS4 and I need to reinstall from CD after a computer crash and reinstall Windows 7 but it will not reinstall.

  This could be to uninstall because it used entirely from the control panel of Windows 7.  Can anyone help?

  Uninstall what you can the normal way via the Control Panel, and then use the CS cleanup tool.  Then try to reinstall. You might want to try an installation download rather than the disc if it continues to fail.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS4 - http://helpx.adobe.com/creative-suite/kb/cs4-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

• Where can I find the "import PDF dialog box.'  I tried to reset the preferences, but it did not work.

  Where can I find the "import PDF dialog box.'  I tried to reset the preferences, but it did not work.

  Try file > open, and select a pdf file.

• I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  I can't install the new application on my iphone 5s revel.  I tried to install the update, and that did not work.  I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!

  Please see the post below updates on the issue of the revel facilities:

  Problem installing Adobe Revel 2.3.2

• Windows Media Center visualizations will not work

  My Windows Media Center visualizations will not work for some reason any. its been like that for a while.
  When I listen to music and want to see my office shows that the program is still underway
  I thought it has something to do with the visualizations I instaled on Windows Media player
  (like ribbons and Upcube)
  I tried to remove them, they either come back or he will constantly ask me to go to it

  my system is portable

  • Windows Vista Edition home premium
    • Intel core 2 DUO

    32-bit operating system
    2.00 GB

  I missed a CD command before the directory (since corrected) so orders would be as follows:

  CD C:\program files\windows media player\visualizations\
  
  DIR

  You'll see the DLLs listed here, they are visualizations that have been installed (if the author decided to use directory default visualizations) NOTE: there may also be cases where the author badly spelled directory visualizations and used something like "visualizations".

  regsvr32.exe - u nom_fichier.dll  (use only the indicated file name that you want to remove)

  repeat if necessary.

• My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?

  My old computer died, I used my Adobe disks for installing Adobe PRO 7, but activation will not work. How can I activate?

  Hi edharaway,

  Please visit this link: Get the Code of Activation for Adobe Acrobat 7.0 Pro

  Thank you!

  Shivam

• I get the following error trying to run an update of external software (not vista). _ &#62; setupnew\setup.cpp __all (135) info PApp and PGUID is blank__@Windows Vista SP2 (6002) NonIE Netscape 28172.30596

  I am logged in as administrator. The error occurs when I double click on the executable file.

  I tried to run the update as an administrator by clicking on the icon and select this option.

  I also tried the option "unlock" under the properties box and re-run. Still getting the error.

  I ran the update successfully on other several other Vista machines.

  Hi HappyFaceBob,

  Thanks for the info. Other programs running without problem? If other programs work and only having trouble with this single application, you must contact the software vendor to resolve this issue.

  Thank you! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

  get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

  Hi Asdlfjasdfjlasdf,

  How did you install ServicePack initially?

  You can try to start safe mode and try to perform a system restore.

  Step 1:

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

  For more information on Safe Mode, follow the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.