I bought a new computer with windows 10.  I installed my version bought Photoshop CS2 and after the period of 30 days

Similar Questions

• How to remove defender windows on the new computer with windows 7... can see, but will not happened to the top in the list of programs under Uninstall

  I installed windows defender when I got the new computer with win 7 preinstalled for protection up to what I could find the # key to the program I bought for another computer.  tried to remove defender windows until I downloaded the paid program but could not find it to uninstall... see windows defender is on the computer, but it doesn't show in the list in my computer/control panel uninstall so I'm not able to uninstall... Please help... so far I do not know I like windows 7 at all... give back me my simple xp.  :-)

  If windows Defender is not supported by microsoft that they deliver of course assign updates for her and also their malicious software removal tool.

  You can disable the safety recalls.

• New computer with Windows 7 Pro installed - also came with disks to Windows 8 Pro - what I lose everything?

  I recently bought a new computer. It was announced to come with Windows 7 Pro and Windows 8 Pro. Since the announcement, I assumed that it would be implemented for a dual-boot (something that I have never made or used it before).

  In another section of this community, I have posted a question, "what happens first – the chicken or the Egg," asking if I would like to transfer my data and applications before that upgrade to Windows 8 or after. I received responses almost half a dozen all recommend that I transferred my files prior to upgrade. With the new software of practice by hand and using a cable standard CAT5, I transferred all my files, including data and most of my applications, my old computer to the new computer. The transfer takes about six hours and I had about an hour of work later to install my pst, BOINC, Malwarebytes, etc..

  I decided that today would be the day and I would upgrade to Windows 8. There are three disks to:

  1. the claims & recovery of pilots

  2. system recovery disk for operating

  3 supplemental Recovery Disc

  However, when reading the attached brochure, there is a warning very clear that if I use these discs, I lose all my apps and data and will have to start from scratch. In many previous editions of Windows, I remember using upgrade disks. Recovery disks were what I did when I first installed the new computer.

  So, I ask, this is the only way I can achieve this? Am I condemned to throw seven hours of work? Y there is a place, less painful alternatives?

  Thank you

  Steve

  Unfortunately, this is how the work of recovery discs, they do not operate like retail disk that will give you the ability to dual boot.

  Your options are limited.

• I have a new computer with windows 7. I need to transfer my emails and contacts from my old computer (windows XP and outlook express) to my new computer. How do I do that?

  both computers are online

  It depends on what e-mail program, you will use in Win7. He was not an '' integrated '', as previous versions of Windows.

  If you on Windows Live Mail, that would be the answer.

  Transfer of data from Outlook Express and Windows Live Mail:

  For Messages:

  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail. Open WLMail and: file | Import | Messages | Microsoft Outlook Express 6, and the point where it was saved.

  Location of OE message store:

  In OE: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  For addresses:

  Open the address book in OE and file | Export | Address book (wab) and save it to the desktop. Copy it to a flash drive. Place it on the desktop or another location on the computer using WLMail.

  Open the Contacts list in WLMail, (go |) Contacts in the Menu bar) and the file | Import | Address book (wab) Windows and the point where you saved it.

  Note: If you use a CD or a DVD instead of a flash drive, after placing on the new machine you must remove the read-only attribute in the properties before you import.

  For the account settings:

  In OE: Tools | Accounts, select the account and export it to the desktop. This will be an .iaf file. Copy it to the new computer and WLMail desktop: tools | Accounts and import the settings from the location you saved the.

  For specific help with WLMail, ask here, not in this forum.

  Windows Live Mail Forum
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I bought a new computer with Windows 7 free upgrade. We also have another office.

  I bought a new computer with Windows 7 free upgrade. We also have another desktop computer. My son has paid and downloaded Windows 7 Home Premium on this computer (Asus), not knowing that I had the free update. ASUS sent me free upgrade disks. Can I use these on another desktop computer? Or I can download Windows on another desktop computer and transfer my registration to it, and then use the Asus drives on this computer?

  Your question has nothing to do with the functionality of Windows Update (vs Windows upgrade), Jan.

  That being said, Asus only can answer your specific question. Good luck!

  Post a question other/other on Win7 upgrade in this forum: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have a computer with windows 7 and you bought a new computer with windows installed. How can I move my windows computer image files on windows 10 7?

  I have a computer with windows 7 to run on it. I have 2 files of images on my current computer and bought a new computer with windows installed 10. Can I copy these files to a dvd and transfer them to the new computer with windows 10 installed. If so, how can I do it and ask what I should do?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-files/file-transfers-from-Windows-Vista-Home-Premium-to/0abb5964-bb5c-49ED-9E03-ef5f5b2fdefc

  Hello Kenneth

  See my response to a similar q in the thread above...

  You can use DVD or CD, but an external drive or a USB is so much faster and easier.

  Best regards, Ric.

• Bought a new computer with windows 7. "psc 2210 all-in-one ' will not work with it....

  I have a psc 2210 all-in-one printer that I love. I bought a new computer with Windows 7 and I can't make it work. The HP site said that I don't have to download the drivers because windows 7 has already installed, but the main thing is that I can't make it work. Anyone, please help. My printer works perfectly and I can't afford to buy another. (I have a 64 bit)

  HP should contribute to this situation. I'm a loyal customer of Hp, but it's ridiculous that they do not create a driver to work with their printers.  All computers are coming with Windows 7.  HP please find a solution!

  I could get my HP PSC 2210 all-in-one to print!  I don't know exactly, because I've tried everything I could think of.  My son is a computer on which it has upgraded to windows 7 (64-bit) several months ago - he was able to successfully print on my printer immediately.   I just did an install complete (I bought the full version, not upgrade) to windows 7 (64 bit) - a couple of days and I'm finally to the point where I'm trying to connect printers.  Here is what I tried... again, I tried several things, although I've been in that general area...

  connect the printer to the computer

  go to the CONTROL PANEL--> Device Manager

  Click the arrow to the left of the IMAGING DEVICES (to be developed)

  RT click on printer PSC 2200 (should be listed under imaging devices)

  Select PROPERTIES--> DRIVER, then uninstall

  Select / tick "remove the driver for the device.

  the printer will disappear from the Device Manager (and peripheral Imaging also if it was the only selection)

  Unplug the printer to computer

  re - connect the printer to the computer

  Device Manager automatically updated (takes a few minutes, the screen refresh let until the yolk! disappears).

  Go to the control panel--> devices and printers

  Select printer PSC 2200, select Customize your printer, then the printed test page

  I hope that you will get a valid test page.  If this is not the case, another option I tried was:

  Through the above scenario.  When you get to the step "select PROPERTIES--> DRIVER, then uninstall" Select UNINSTALL directly from this menu (be sure to select/check "remove software pilot")

  Continue with the remaining steps above.

  I also tried 'Update Driver' of one of the previous screens above... I would like to know if you have a bit of luck!   I'm sorry that's not accurate.  Yet once, I tried everything I could think of, and something finally worked!  (I don't think I tried to 'Turn off the pilot')   Good luck! .........

  ).

• I have Photoshop CS6 extended that I bought as a student in 2012. It comes with a disc for loading. I loaded it on two computers. One of my computers is gone belly up so I had to buy a new computer with Windows 10. How can I reload the program?

  I bought photoshop CS6 extended as a student in 2012. I loaded it on two computers. A computer went belly up last week and I bought a new computer with Windows 10 on it. How to load the program on my new computer. I have the DVD disc. How can I got to talk to someone at Adobe? Don't they have any live support?

  Hi wayneharder,

  Use of the download link for Photoshop CS6 Extended below.

  Download Adobe Creative Suite 6 applications

  Once the application is downloaded and ready to install it, need you the serial number to activate it.

  If you already have a copy of one of them, then it's fine, otherwise check out the link below to find your serial number registered.

  Find the serial number of your Adobe product quickly

  Kind regards

  Mohit

• I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• New computer with Windows 7 but without disks. How to operate

  Buy a new computer with Windows 7 installed some time.  Came to use but without the provided disks.

  Could not go beyond "Enter product key".

  Buy a key, or do I have to get a new copy of Windows?

  whenever you buy must provide certificate of authenticity from the windows CD or another method to reinstall the OS,

  a Custom built PC will be very probably built using integrative system OEM or FPP retail media
  and the only option for this type of generator system to provide resettlement must provide the MS hologram CD/DVD,
  Contact the place where bought you the system and require the COA and Windows Media.

  If they aren't in business anymore or it was a garage / ebay operation etc. and disappeared since consider have been ripped off.

• Photosmart 6510 connect to the new computer with Windows 8

  I have a photosmart 6510 e - all in one printer series.  I just bought a new computer with Windows 8.  When I tried to connect my printer, an error message came up saying that I have to upgrade to Vista or Windows 7.  He does not Windows 8.  Is there a solution?

  Hello

  Download and install the latest version of the software Windows 8 below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-108880-3&cc=us&DLC=en&LC=en&OS=4131&product=5058336&sw_lang=

  Shlomi

• Can I install my CS6 Standard design on a new computer with windows 10 system?

  Can I install my CS6 Standard design on a new computer with windows 10 system?

  Stefanie Hey!

  I forgot, I bought the student & teacher of CS version. The product key on Amazon isn't so the serial number that is stored in the adobe account.

  Now, I could successfully install Design Standard CS6 and all programs of Nice work so far! Just for your information: I use a 64-bit with Windows 10 Professional computer.

  Good luck

  Tony!

• have acrobat 6.1 and have updated new computer with windows 8 compatibility issue message get

  have acrobat version 6.1 bought a new computer with windows 8.  tried to install but received message there are compatibility problems.  Noticed when I press print option not you adobe option.

  Acrobat 6, released in 2003, replaced by version 7 in 2005. If your software is nine years older than your operating system. This is rarely a good combination.

  If you upgrade your operating system, you should think to upgrade your software too.

• Unable to down load photo 10 items, to a new computer with windows 8, 1335 error message?

  support for photoshop elements 10 installation to a new computer with windows 8.

  Error 1335, on re-entry error 2350.FDI Server error message.

  I just bought a download about a year ago. Have serial numbers that work.

  Everything seems to download find, but will not be finished.

  Downloaded 11 trial without any problem. I'm not willing to pay more in $$$ for something, I already have, but don't see that 11 looks great.

  Can you please provide the exact error message that you receive when you try to install?  You may also want to check Error 1311, 1335, or 2350 "... not found Source file data1.cab ' | Install Adobe products | Windows - http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html that could indicate that your installation media have been damaged.

• How can I install Acrobat 6.0 on the new computer with windows 7?

  I bought a new computer with windows 7.  I had earlier purchased Adobe Acrobat 6.0 and cannot install it on my new computer.  What should I do?

  There is a discussion on this thread http://forums.adobe.com/thread/512914 that you might find useful. According to the thread, you must upgrade to Acrobat 9.0.