I bought Adobe Acrobat 4.0 and aired on a Windows XP laptop. I bought another laptop running Windows 7, but it seems that my version of Adobe Acrobat 4.0 is not compatible with Windows 7. What should I do?  Do I purc

Similar Questions

• Your version of obsolete Microsoft DLL components is not compatible with this version of Windows.

  I ran the report of problems and Solution of control panel and I get an alert saying that ' Your version of obsolete Microsoft DLL components is not compatible with this version of Windows. "Does anyone know what this means and what to do to fix.

  I went to report problems and Solutions, because my PC started crashing about 10-15 minutes after the launch of Windows Media Center. I don't know if these two things are related.

  Any help or advice would be much appreciated.

  Thank you

  Hello PTLUK,

  I suggest you make the SFC scan.

  File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  d. you should see the following message on the screen:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  e. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article:

  http://support.Microsoft.com/kb/929833

  Also take a look at the link that talks about the same question below:

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/895e0fcb-045b-4166-BFBB-bc302a26820b

  Kind regards

  Savan - Microsoft technical support.

• Your version of Intel Active Management Technology is not compatible with this version of Windows. What does this mean?

  my pc is hp compaq dc 7800 small form factor.

  I installed win vista Business 64-bit

  After installition, I get this message

  "Your version of Intel Active Management Technology is not compatible with this version of Windows."

  What does this mean?

  Thank you

  Hello

  I suggest you send the question in this forum and check if it helps;

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup

  It will be useful.

• Action Center message: "your version of Microsoft Deprecated DLL components is not compatible with this version of windows."

  Original title: obsolete Microsoft DLL components

  I get an error through the center of the Action: "your version of obsolete Microsoft DLL components is not compatible with this version of windows." I'm on windows 7.

  Piyush salvation,

  1. This occurs when you perform a specific task on your system?

  2. did you of recent changes on the system?

  This error seems to be related to Msvbvm50.exe or compatibility of applications with Windows 7.

  Method 1:

  You try to run a SFC scan on the computer that would be a system file corrupt on the computer search and replace.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  Method 2:

  You can also check the link wire and suggestions provided by Andre Da Costa, MVP on October 17, 2011.

  Why did I not this message, your version of obsolete Microsoft DLL components is not compatible with this version of Windows.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• BOOTMGR is missing. Get the message "this version of the system recovery options is not compatible with the version that you want to repair...» »

  Two days to try to solve this problem of complete.  Vista Home Premium (64-bit) has been installed more than 6 months ago.  With the legal copy in the computer, I can choose the repair, it shows me me partition Windows Vista Home Premium.  I don't get the system recovery options, but I get a window that says «the version of the system recovery options is not compatible with the version of windows that you want to repair...» ». I loaded the original drivers for the motherboard.  I started in safe mode, and I can see the different folders.  It tells me that everything is there. Does anyone have a solution for this? I use a product called '360 °' for regular backups, but backups are on a network drive.

  Thanks for the suggestions!

  Here is a link to some people who had the same problem and solved: http://keznews.com/forum/viewtopic.php?f=2&t=20665.  It seems to have something to do with the help of a record of 32-bit with 64-bit recovery (or something of the sort).

  I hope this helps.  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• I'm Italian and I just ordered photoshop and elements first. I've already paid for, but there is no file to download. I have a mac and there is for windows. What should I do?

  I'm Italian and I jI'm Italian and I just ordered photoshop and first elements. I've already paid for, but there is no file to download. I have a mac and there is for windows. What should I do? oI TEU am Italian and I just ordered photoshop and first elements. I've already paid for, but there is no file to download. I have a mac and there is for windows. What should I do? photoshop and elements first rdered. I've already paid for, but there is no file to download. I have a mac and there is for windows. What should I do?

  You must ensure that you ordered for a Mac.

  If not,

  To the link below, click on the still need help? option in the blue box below and choose the option to chat (or phone)...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

  Here are a few download links:

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• SGD version 10.2.0.4.2 is not compatible with the repository version 10.1.0.4.0

  Im trying to start the enterprise database manager and I get this error in the log file:
  SGD version 10.2.0.4.2 is not compatible with the repository version 10.1.0.4.0 that repository needs to be patched.
  
  Database version is 11.2
  The operating system version is: Linux 2.6.9 - 78.0.0.0.1.ELsmp #1 SMP Fri Jul 25 16:41:56 EDT 2008 i686 i686 i386 GNU/Linux
  
  I use it to load the database and console:
  
  export ORACLE_HOME=/opt/oracle/product/11.2.0/dbhome_1/
  export ORACLE_BASE = / opt/oracle /.
  export ORACLE_SID = orcl
  /opt/Oracle/product/11.2.0/dbhome_1/bin/lsnrctl start
  /opt/Oracle/product/11.2.0/dbhome_1/bin/DBSTART /opt/oracle/product/11.2.0/dbhome_1/
  /opt/Oracle/product/11.2.0/dbhome_1/bin/emctl start dbconsole
  
  When I realize that I see it on the console:
  
  Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
  Copyright (c) 1996, Oracle Corporation, 2009. All rights reserved.
  https://192.168.2.210:1158 / console/em/aboutApplication
  Oracle Enterprise Manager 11 g Database Control from... began.
  ------------------------------------------------------------------
  Logs are generated in the /opt/oracle/product/11.2.0/dbhome_1/machine_one_lega/sysman/log directory
  
  
  So I try to go there, and the web browser displays this:
  
  503 service unavailable
  Service is not initialized correctly. SGD version 10.2.0.4.2 is not compatible with the repository version 10.1.0.4.0.
  
  Can you help me find this solution?
  Thank you

  Hi Ingenio,

  This problem sometimes occurs when the earpiece does not work, this is why the connection cannot be done without earphone.

• Your version of obsolete Microsoft DLL components is not compatible with this version of Windows. What happens when I try to install marble run a free game for pc.

  I have been dowbloading this marble run set of pc, I installed and just before opening the game, I get this message: your version is not compatible with this version of Windows.  Please help me if you can. Thank you.

  Hello

   

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems.

  You cannot use run a game and you get the message that your version is not compatible with this version of Windows.

  To help you better, we need more information.

  It is the name of the full game?

  It seems that the game is not compatible with the Windows 7 operating system.

  I suggest you to uninstall the game and reinstall in compatibility mode.

  Step 1: Uninstall the program

   

   Visit the site:

   

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Step 2:

  Install the game in compatibility mode.

  Visit the site:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  Feel free to contact us for any question related to Windows .

• This is the message I got: your version of obsolete Microsoft DLL components is not compatible with this version of windows

  I'm currently running Vista Home Premium SP2 a 2 year old computer.  I loaded some software call professor teaches the basics of basic HTML and advanced.  It load on my computer very well and in fact I was at Midway through a program (this is an interactive format where it shows you examples, allows you to type in some information and shows you the result) and all of a sudden I got this message: this obsolete version of DLL Microsoft components is not compatible with this version of windows.  I clicked on the link that says I could check online with Microsoft to see if there are any patches, but she came back with nothing.   It does not work on XP.   Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Acrobat pro dc is not compatible with windows server 2003, I the downgrade?

  I buy Adobe Acrobat Pro DC and need to use it on a Windows Server 2003 computer. I can the downgrade yet?

  No version of Acrobat is for the server... (except Terminal Server). It's technique and license number.

  You can not downgrade retail licenses. Possibly of multi-user licenses.

• I just upgraded to 3.6.10 3.6.8 and now FF does not start. It gives an error message saying version 1.9.2.8 platform is not compatible with 1.9.2.10

  Read the question!

  Do a clean reinstall and download a new copy of Firefox since http://www.mozilla.com/firefox/all.html and save the file to the desktop.

  Uninstall your current version of Firefox and remove the Firefox program folder before installing this copy of the Firefox installer.

  It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  You can skip the step to create a new profile, which is not required on this issue.

  See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• Latest version of ios 9.2.1 is not compatible with my car audio system

  Hello

  Since I upgraded my iPhone 5 ios to 9.2.1 my touchscreen on the audio system fly of my Toyota Prius no more answers when my iPhone 5 is connected to the USB port.  Toyota told me that I must try to downgrade to the previous version of the ios.  It's very annoying.

  Can someone tell me what to do and how to solve this problem.

  Thanks in advance for any help.

  Diane

  You can not downgrade iOS, Apple does not support. I would check with Toyota once again to see if they have an upgrade of your system. Only they can tell you if they support iOS 9.2.1 for their system.

• cannot update 6.0! XUL runner says: "error: version 6.0 of the platform is not compatible with the version min > = max version 6.0.2 < = 6.0.2.»

  Pulling hair because there is also a request to check if another copy of Firefox can be installed and have so uninstalled and deleted any reference to Mozilla and Firefox several times, and as a result have lost all bookmarks, cookies etc. Having to accept the latter, but still cannot load the latest version. The downloaded exe file will be just not successfully. Any advice would be welcome. [email protected]

  If you use ZoneAlarm Extreme Security then try turning off virtualization.

  • http://KB.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
  • [869812/questions/869812]
  • [869951/questions/869951]

• My Vista SP1 is not compatible with my Family Tree Maker version 16. __

  I have the program windows Vista SP1 and my Family Tree Maker version 16 is not compatible with it. What should I do so that I can use this program on this Vista computer? Thank you

  Hi tondsmith,

  Family Tree Maker is compatible with Windows XP? (You don't actually say if it worked on Vista but is no longer works since installing SP1). If this worked on XP and then try to install in compatibility mode.

  1 / locate the "setup" for Family Tree Maker file and right-click on it.

  2 / in the drop-down menu, click Properties.

  3 / in the Properties window, click the Compatibility tab.

  4 / in the compatibility window you will see a section (top) marked 'compatibility mode '.

  5 / in this section, you will see a box with the words "run this program in compatibility mode for" to the right.

  6 / click in the box to appear a "tick".

  7 / in the dialog box below, you should see "Windows XP (Service Pack 3)."

  8 / If you don't see it, click the arrow to the right of the box and select Windows XP (Service Pack 3) from the drop-down list.

  9 / Finally, click OK.

  10 / your Family Tree Maker software should now begin to install in compatibility mode for Windows XP.

  If this does not work (it usually works) then you may need to upgrade to a version of Family Tree maker that supports Windows Vista.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How can I restore my new iPad mini from iCloud backup if they are not compatible with iOS9?

  My Mini iPad had an internal problem, so I got a new one on the Apple store.

  The problem is I'm trying to save my other from iCloud, and I get a message saying

  my back ups that are not compatible with iOS9? What should I do? I don't want to set it up as a new iPad.

  I want to save all my info. Help, please!

  What iOS has been used to create the backup initially? Is it possible that the backup was performed with iOS 9.x and replacement has only iOS 9.0? Check what iOS is on the replacement iPad. If this is not the last and the original device was later, then you will need to put in place the iPad like new, update of iOS, then go into settings > General > reset > erase all content and settings. Then you can restore the backup to iCloud.