I bought an update of AVG security. He does not load because of a problem with your registration of chrome. ?????

Similar Questions

• Windows xp sp3 system root of the Hal.dll error or not found after auto update of windows system corrupt does not load.

  12/07/2011 my system automatically downloaded a system update and rebooted when it restarted, it wouldn't load windows and gave this error message. What should I do? I tried to remove the hard drive and put it on another computer if I could look at the problem but I don't know what to do to fix. My backup information are on another hard drive in the original computer. I use Norton 360 for my backups.

  It is extremely unlikely, there is nothing wrong with your file hal.dll despite what says the error message (do not try to replace).

  It is extremely likely that XP just cannot find the fine hal.dll where it says to look for.

  XP is maybe not able to find the file, it's file system is corrupted (Norton that sometimes), or if your c:\boot.ini has somehow become corrupted and told XP to find files in never never land.

  You must first run a chkdsk /r on your distressed HARD drive and if that does not do it, you have to redefine your boot.ini file.

  If you have the drive in another machine, you can open the file c:\boot.ini with a text editor and copy/paste the content back here for analysis.

  You can also rename your file c:\boot.ini to something like c:\boot.ini.bak (so now you do not).  In a single partition installation, XP is not even a file c:\boot.ini to start.  He'll complain briefly, but always begin (unbelievers - try it).

  t can take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  I'll keep an eye on your Norton since when your charge again, Norton System may corrupt your file system again and you will have to repeat the chkdsk/r to repair (so you can set Norton).

  I put the drive in the original system and fix it there with the XP Recovery Console.  After all, it's where he has to work, right?

  If you have any bootable XP installation CD authentic where you can start the XP Recovery CD of Console, you can make a bootable CD from the Console of the Recovery XP (no XP media required).

• Update (error code 80070103) Windows Update fails & Microsoft Security Essentials does not install (error code 0 x 80070643)

  I keep trying to update and all these errors reappear. I can't install Microsoft Security Essentials and any update of Windows. I tried to do system Recoery by pressing F11 after reboot, and it does not work either.  I'm guessing that something might be wrong with the registry or there is a virus but I am not a computer wiz. I don't have the Vista recovery disc and the original disk to restart.  is it possible to fix this?

  I paid to get it to format in November 2010... I installed a fake Windows Vista on it (32 bits but my PC on a 64-bit password) so I had to clean install it.

  I don't understand: If you paid someone to format the HARD drive and do a clean Windows, when install I YOU "installed a 32-bit Vista?"

  If your parent friend had lost the Windows CD comes with the brand new computer, the person you paid use to do the clean install of Vista 64-bit?

  I do not see KB948465 in installed updates, only KB956250 & KB256506

  I asked only KB948465. In any case, KB256506 is not an update or a section of the play.

  No, I never had any other than Microsoft Security Essentials antivirus

  Again, I don't understand. If you have never had any other antivirus MSE and MSE has been installed since November 2010, why you try to 'install Microsoft Security Essentials' now?

  Q: which, if any, of these updates ARE LISTED in updates installed (no update history)?
  A: See the number 3, I don't see anything else apart from those two

  What "number 3"? You see nothing else, in addition to the two updates to date?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  I give up. I can't help you if you do not answer my specific questions in your very next answers!

  I think you'd better take the computer back to the repair shop & pay to figure what's wrong (yet). Good luck.

  In & out...

• BlackBerry Smartphones Blackberry Bold 9930 update failed and the software does not load

  I have a Blackberry Bold 9930 and yesterdasy I received a msg saying to upgrade to 7.x software Blackberry. I followed the instructions (takes too long like 2 hours to download) and then. Big mistake because it cooked my phone. It seems that when you upgrade, the upgrade process goes thru, but stops after the time zone to restore the process and reports an error 602 with a reset button to reset your database. The reset button does not work and I restarted the phone to restore the db. At the moment that it restarts, launched the process, and even once, it failed after the msg indicating time zones (100% and overall restoration treatment 7%). Zones roughly completed, but then I got a msg saying I wandered 602 belive. On all courses was about 5 to 10 percent. Now my phone is undesirable because it does not restart. Verizon says they have a large number of phones across the country, but BlackBerry says it's a matter of Verizon...  Someone at - he already heard of this I am now without such a 4 days while I get a replacement Friday because of the holiday...  I am not very happy as another question, I found - during the upgrade process it used the cells instead of my wirelss home network to download the software and it really took about 2 to 3 hours, then another hour before it failed during the upgrade process. So about. 3 to 4 hours to play with an upgrade yesterday.

  Thank you

  Rich

  Hello merlin02131

  Welcome to the Forums of the BlackBerry Support

  Sorry to hear about the problem you are experiencing during the update!

  But you can still use Desktop Software for the update process, personally, I prefer never to do an Over the Air update. I think that something has gone wrong with the update process and thus you encounter this error 602.

  You have a backup of your device, or using BlackBerry protect for the backup?

  If you wish you can try several method to recover your device of this error, all you need is a PC and an Internet connection active. But attention, this method deletes the data user in this device. This is the Knowledge Base to follow:

  KB10144 : How to force detect the BlackBerry smartphone using the Application Loader

   

  Additional information:

  KB29237 : "App Error 602" appears on the BlackBerry smartphone running BlackBerry 7

• Hello, I just bought the plan of photography, and it does not load.

  So I bought the plan of photography, I downloaded CC, she, very happy for my installed programs. But then, the loading screen would not actually load. I let stand overnight, still doesn't load. I restarted my computer, hoping that he freshen up and charge. But now it comes out black. This is what it looks like:

  Https://helpx.adobe.com/creative-cloud/kb/black-screen-sign-in-creative-cloud.html black screen

  or

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• 80070005 error code when you try to download a security update help please it just does not load?

  a cumlative update is available for IE8, but after several times it will not be updated. I tried help and shut down my firewall etc but nothing works. Tried since June 17. Download of IE 9 is available but I think that because the security update is missing it will not charge it either - Helllllllllllp?

  Hello

  1. did you try to install the update manually?

  2. what happens when you try to install IE 9?

  You can read the following article and try the steps and check if you can install the update:

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005

  Note: Applies to Windows Vista.

  You can try to download and install the stand-alone package of Internet Explorer 9 and check.

  Download Internet Explorer 9

  You can also check out the article below and check.

  Solve the problems when you can't install Internet Explorer 9

  Hope this information is useful.

• Creative cloud will not update, just to stop and does not load

  Windows running windows 7 pro, he began to automatically update creative cloud and just stopped, tried to restart the machine, start to download again with lucky to MB. Don't know what to do now

  Hi Harold,.

  Please check the help below document:

  https://helpx.Adobe.com/creative-cloud/KB/Error_Code_2_failed_update.html

  Kind regards

  Sheena

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Security Center does not recognize the Windows Security Essentials

  Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

  1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

  2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

  3. I installed McAffee VirusScan.

  4 security Center stopped giving Windows security alerts for Virus protection.

  5. I uninstalled McAffee VirusScan.

  6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

  7. I installed Windows Windows Security Essentials and rebooted.

  8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

  Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

  I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

  In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

  I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Vista does not load after that install Microsoft Update error the breakpoint of the exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.

  Original title: Vista does not load after you install Microsoft updates

  A Dell Inspiron. Updates have become available and have been installed. Next time the laptop was put on it does not start, it was all there on the screen was the dotted line down and after some time a black screen.
  I tried running the recovery and I get the message "the breakpoint exception. "A breakpoint has been reached (0 x 80000003) occurred in the application at location 0x73eb764a.
  At the time that the laptop does not work and I have no idea what updates have been downloaded and installed.

  Hello

  Try the methods provided below and check if that helps.

  Method 1:

  Step 1:

  Try to boot in safe mode with network and check if you are able to boot to the desktop.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you are able to start the office try to download and run a system scan using the Microsoft Safety Scanner full and check if that helps.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  See also:

  How to remove a computer virus?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Method 2:

  Clean boot

  If the problem does not persist in safe mode you can also perform the clean boot.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  Try the system restore by using the System Recovery Options.

  The System Recovery Options menu is on the Windows installation disc. The menu can also be installed on your drive hard if your computer has preinstalled recovery options.

  For more information click on the link below.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Please keep us updated on the State of the question so that we can help you further.

• "Review updates" Vista sp2 page does not load.

  My computer has windows Vista Home Premium sp2 32 x and updates are checked for every day. There are 2 updates important and 2 Optional updates listed at this time. When I try to "review updates" category either important or optional page does not load. It is a problem for several months now. I wonder what are these updates and why I am not able to view them. I am the administrator and the only user of this computer. It's not part of a corporation, company or home network...

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  I would temporarily disable all security software and check if the problem persists.

   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• Windows 7 slow down and MS security essential does not work with error "0xc0000185.

  My PC does not work well.

  I use Windows 7.

  When I tried to open it, it will take at least 5 minutes before turning into log in page. and after I entered my password again 5 minutes to load.

  When I connect successfully my essential security MS does not work with error "0xc0000185"... then my Explorer windows always crashing.

  After each action I did it takes time to load... also, I tried to turn on my Defender, but unable to locate... I also tried to analyse using malware bytes, but it also shut down the application...

  Help, please. I need all my files...

  Thank you.

  Hello

  Windows Defender is disabled by default when you use MSE and nothing to worry about.

  Analysis of Malware in Mode safe mode with networking.

  Download, install, update and scan your system with version free Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  _______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  See you soon.

• I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  I bought a Canon 70 d. Photoshop CS5 extended does not load the CR2 files. I installed Camera Raw 0.2. Help

  Photoshop CS5 is only compatible with Camera Raw to version 6.7. Photoshop CS5 is is no longer updated by Adobe. The best way to have the latest version of Photoshop is to his scribe for the package of creative photography of cloud. This would have the latest version of Photoshop and Lightroom. You will receive updates of these two programs through the creative cloud.

  If you don't want to upgrade your Photoshop you can download and use the DNG Converter last to create digital copies of (DNG) negatives of your raw images. You would be able to use these files with the software you already have. But you won't receive updates for the software you are currently using. Your new device photo, the 70 d, requires camera Raw 8.2 which is only compatible with Photoshop CS6. Camera Raw 9.2 is only compatible with Photoshop CC 2015, which is only available through the creative cloud. You might want to consider the purchase of 14 Photoshop elements as a complementary program to what you use.