I bought Illustrator for a month, but when you try to run the application, it asks me to 'renew subscription '. I have tried reloading illustrator twice and reloaded CreativeCloud but it still does not work. What else can I try? I immediately need to HAVE

Similar Questions

• Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

  Locking: double post. See: Hello.  I bought Photoshop in Italy about 4 years ago.  I bought a new camera and Photoshop won't open the RAW files.  I tried to download the update, but it still does not work.  How can I get updates?

• All the drivers are updated for my scanner, but it still does not work?

  I tried to "update drivers" for my CanoScan LiDE 200 just in case, but he said that all drivers are already updated. But when I press "scan" on my scanner, it nothing happens; It does not work! I went to "scan profiles", through the "Scanners" Wizard and when I tried to add my scanner, he said:

  Error - Failed to initialize selected scanner.
  What should I do? I need my scanner!
  Thank you.
  :-) N °

  You need to install the win7 Canon software / drivers before you connect the scanner

  http://www.Canon.co.UK/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_200.aspx?type=download&page=1

• When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  When I try to update creative cloud, I get a popup to connect, I get my Adobe password, but it does not work. I have reset my password and I tried again, but it still does not work.

  The password screen shake when you enter the password?
  If so, it asks your Mac password.

  Don't worry about file opm, Adobe recreates him when you try to connect.

• My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  My creative cloud no longer works. When I try to reinstall, I get the message "AAM cannot initialize. I tried all the instructions but it still does not work. Robert

  Could you please mention the operating system?

• My computer sometimes suddenly restart after disk defragmentation and applied restore.it system still does not work. Can someone help me? : ()

  I need help on my computer, it's a window Vista Home Basic. Sometimes my computer rebooted or encountered problem blue screen. Is it related to my anti virus program or any hardware or software failure? I try to solve it, Defrag disk and system restore, but it still does not work.

  Do you have an antivirus installed? Otherwise download, update and scan with this

  http://www.Microsoft.com/security_essentials/

  Follow these steps

  http://support.Microsoft.com/kb/929135

  and this

  1. Open an elevated command prompt. To do this, click Start, click principally made programs,Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  Type the following command and press ENTER:

  sfc/scannow

  http://support.Microsoft.com/kb/929833
  http://www.howtogeek.com/HOWTO/Windows-Vista/verify-the-integrity-of-Windows-Vista-system-files/

• How I download/install adobe first cc on the D drive because I don't have enough on the C: drive? Ive gone to settings on creative cloud and location of the file changed already but it still does not work.

  How I download/install adobe first cc on the D drive because I don't have enough on the C: drive? Ive gone to settings on creative cloud and location of the file changed already but it still does not work.

  Hi brandong13,

  Here are the steps that you can follow.

  1 change the location of installation using Creative Cloud Desktop App, go to preference > creative cloud > Apps and change the installation location.

  2. delete the folder '%Temp%' and restart the process.

  NOTE: Application is downloaded to the default location, we can only customize the installation location using creative cloud app in this case.

• I have the one year subscription and I ran more money on my debit card. If adobe stopped the cloud creative until I put a new card debit that has money, but it still does not work? any ideas.

  I have the one year subscription and I ran more money on my debit card. If adobe stopped the cloud creative until I put a new card debit that has money, but it still does not work? any ideas.

  The CC has expired, please make a new purchase.

  Technically, you will need to disconnect & reconnect the CC desktop application.

  Concerning

  Stéphane

• When using my computer, the screen suddenly made sense upside down. Even my mouse runs in the background. I tried to restart but it still does not work

  This could be some kind of virus?

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  See you soon.

  Mick Murphy - Microsoft partner

• I typed in my product key, but it still does not work

  I found my product key, but it still doesn't work when I type it in. I do not know why but I try to download something, but I can't because my product key does not work.

  Hello guest6796,

  Thanks for posting on the Microsoft answers Forum.

  Please see the URL below for more information on how to find the product key for your Windows Vista computer.

  http://www.Microsoft.com/genuine/downloads/LocateProductKey.aspx?displaylang=en&sGuid=aead81f3-e97a-4F7C-954C-c0e2cb6dd72d

  Answer please come back and let us know the status of your question.

  Thank you, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Recently restructured PC. Tried to import bookmarks HTML, but nothing happens. Tried other browsers, still does not work. How can I fix?

  Before reformat my PC, I exported all my favorites via the HTML file. I reformatted, installed Firefox, then attempted to import all my favorites. I go to the import function and choose the bookmarks HTML file and nothing happens at all. I tried to use other browsers for import, but nothing happens. I don't know how to solve this problem.

  I thought that maybe I could transfer the HTML file in a JSON file, but I couldn't find a way to do it, even after it is renamed file extensions. The HTML file may possibly be corrupt? I'm running out of ideas on how to do to import my favorites!

  I really need to solve this problem, please help!

  I managed to fix it.

  (1) I opened the HTML file with notepad.
  (2) I then went to file > save as >

    -Then changed the file type to, "All Types"
  

  (3) then in file name I named it Bookmarks.JSON

    -The HTML file now saved as a JSON backup and I was able to import it.
  

  However,.

  There is still no patch or reason to explain why the backup HTML does not. I strongly suggest you Firefox fix, as it was highly agitation.

• I have an Ipad. It has been implemented for eprint airprint, but lately, it does not work.

  HP Officejet 6500 a Plus

  Mac Lion operating system

  Printer not detected from my Ipad

  None

  Hello fjnatwick,

  If I understand you correctly, you could use airprint in the past to print from your iPad. If you cannot see your printer appears when I try to print, try the following steps:

  1. If the printer is still lit, disconnect the power cord from the printer, leave it unplugged for 30 seconds, then reconnect the power cord to the printer. Once connected to the printer should automatically turn on.

  2. turn off iPad completely by pressing the power button on the upper right of the iPad until you see "Slide to power off" and drag your finger on the bar to completely turn off the iPad. Now re - turn on the iPad.

  Try your print job again and see if you are able to locate the printer on your iPad.

  If you are able to locate the printer but nothing happens when you press the "print" key, then try the following steps:

  1 clear print jobs from the print queue on your iPad by tapping twice on the home button. "PrintCenter" icon should appear at the bottom of the screen. Select PrintCenter and delete print jobs by sliding your finger across each task and select "Delete" until they are all gone.

  Now, try again to see if it is able to correctly print your print job.

  If you still have problems, questions, do not hesitate to reply to this message and I'll try to find an answer for you.

• Upgrade to Windows 7, Vista, and my Lexmark X 5470 printer was not and could not print. Site gave a download for Win 7 compatibility with which I tried to do, but it still does not work. Any ideas?

  With the help of a Media Center PC HP Pavilion.

  solution uninstall the lexmark program
  Download this file: http://support.lexmark.com/index?page=content&id=DR7353&actp=search&viewlocale=en_US&userlocale=EN_US+&segment=DOWNLOAD&productCode=LEXMARK_X5470&searchid=1257910229479
  Right-click on it (after downloading) and click on properties, then click on compatibility, then choose run this program in compatibility mode for windows vista service pack 2 and click ok
  now run the program and follow the directions.
  print the test page and "walla".

• "BOOTMGR is missing press ctrl + alt + del to restart" with this disc with recovery vista on it, but it still does not work. It could be the type of disc or something! NEED HELP PLEASE!

  Hello

  Just the message keeps coming and coming. so I did what all seemed to be telling me to do, I downloaded this 'Windows Vista 32 - Bit (x 86) Torrent recovery disk' on a disk and put it in my computer, restarted and is come up with the same message, I thought I might need it again. So I did, Bam, same message. It might be the disk or something as I said, but I don't know! Its really annoying me now, please help!

  Oh and I do not computer language can you please make it simple for me...

  Thank you!!

  Here is the download of recovery for Vista instead of Windows7 drive: http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/.  The thing is, I'm not sure you can use this drive for a boot recovery - you need an Installation of Vista disc.

  If you can get your hands on an Installation of Windows Vista genuine disc, then here are some procedures to fix the BOOTMGR missing (you can try repair system with the Neosmart disk but honestly, I don't think that will work - you need to do the other procedure):

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  ·        Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc.  Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html.  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.

  If this does not resolve the problem, try the following:

  To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

  1. put the Windows Vista installation disc in the disc drive, and then start the computer.

  2. press a key when you are prompted.

  3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.

  4. click on repair your computer.

  5. click on the operating system that you want to repair, and then click Next.

  6. in the System Recovery Options dialog box, click command prompt.

  7. type Bootrec.exe, and then press ENTER.

  Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

  ·        bcdedit/export C:\BCD_Backup

  ·        c:

  ·        Boot CD

  ·        BCD attrib s h - r

  ·        Ren c:\boot\bcd BCD.old

  ·        Bootrec /RebuildBcd

  Good luck and I hope this helps!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm trying to view the photos on my pc on my tv samsung, which has a wireless connection to the computer via the router. I spent a lot of time setting up, but it still does not work! Work.

  Recently I bought a Samsung smart tv I want to connect it to my pc so that I can view the pictures and videos on my TV. I have a connection through the modem but the pictures do not appear on the TV.

  I did the same thing only to realize that a standard USB cable will not work. Make sure that you connect your computer to your TV using a HDMI cable standard. They are not perfectly retangular than a USB cable and have edges around the corners of slightly rounded connectors. Can be purchased at most stores computers or shack radio for about 17 or 18 dollars 6 feet long.