I bought & installed audio studio 10.0 Sony. When I try to open it, a message appears that says: he has stopped working. How can I open properly?
When I try to open it, the splash screen appears, but leaves message box that goes up as "sony audio studio 10.0 has stopped working". Problem is that never, he BEGAN to work, other than the coming splash screen! I tried to uninstall & reinstall, but so far failed to open. I hope someone can help. I am running windows 7.
Try running in compatibility mode. If this does not help, contact the manufacturer (Sony =).
Tags: Windows
Similar Questions
-
The error message is Windows telling me it will find a solution and warn me, however, I do not get a message for me to rectify the problem.
Hello
1. were you able to play games sooner?
2. don't you make changes before the show?3. What games you try to play?
I suggest you try to start the game by placing the computer in a clean boot.
Step 1:
How to perform a clean boot
http://support.Microsoft.com/kb/929135
Note: Once the diagnosis is done, reset the computer to start as usual.
Step 2:
Game hangs or quits unexpectedly
http://support.Microsoft.com/kb/303032
Step 3:
See the event viewer for newspapers
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Hope this information is useful.
-
I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then
Hello Richard Popp,.
I'm not an expert on Quicken so I do not know what help I will be.
You could look at this post on the Quicken Forum and see if this information helps you.
https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA81 Quicken uninstall using the Windows Control Panel
2. run qcleanui.exe and clean all versions.
3. restart your PC
4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).
5 update Quicken at the last updated R6.
See if that helps. Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?
Hi Anthony,.
You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom
Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.
Provide the permissions to read and write to your identifier and then close.
Then reopen Lightroom. You should be able to open Lightroom.
Please let us know if it helps.
Kind regards
Tanuj
-
I just bought first elements13 and I installed it. But whenever I try to get my license number, an error message appears that says that my computer is not connected to the internet. I've tried everything. Help!
Check your hosts among other common problems, sign in, activation or connection errors. CS5.5 and later, Acrobat DC
-
I tried to install Health Vault Connection. My computer, an HP laptop, tells me that the program has stopped working. It works on Windows XP and Windows 7 PC. I recently discovered that it will not work in DOS. How to get this running and how to uninstall BACK so that this program will be executed. Will affect the functioning of the laptop?
Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
There are no BACKS to win and has not been for some time, so I don't know where you got this information.
Clean boot the PC, then reinstall HealthVault
http://www.Microsoft.com/en-us/HealthVault/tools-devices/devices.aspx
(Remove compatibility options that you maybe solved everything first)
-
I have my payment plan current iCloud from the web, but when I install programs on my Mac, I suggest that the version has expired. How can I fix it?
iCloud is an Apple product... you hear Adobe Creative Cloud?
Your subscription to cloud shows correctly on your account page?
https://www.adobe.com/account.html for subscriptions on your page from Adobe
If you have more than one email, you will be sure that you use the right Adobe ID?
.
If Yes
Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
.
If no
This is an open forum, Adobe support... you need Adobe personnel to help
Adobe contact information - http://helpx.adobe.com/contact.html
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
-Select your product and what you need help with
-Click on the blue box "still need help? Contact us. "
-
I bought Adobe Acrobat Pro 9. I used it on my computer for years with no problems. Today he gave me the following message: "license for this product has stopped working. You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance. (0)"I then uninstalled and reinstalled using the license key of my package, and I just get the same message. I contacted customer service and they told me that they are unable to support me and directed me to the forum. Please help as soon as POSSIBLE.
-
I have adobe CS3 installed on macbook pro, but he said that the license has stopped working... I then went to your website and he advised me to download the recovery of license application, I did, but then when I tried to run this app, it then came with the recovery of the license was not based... How can I get my CS3 works again? Thank you, Glenn
Hello
Please check the help below documents depending on your operating system:
Error: "License has stopped working". Windows
Error "Licensing has stopped working". Mac OS
Hope that helps!
Kind regards
Sheena
-
Mac user. CS4 still active (not disabled) on my macbook pro DIED. Time Machine installed CS4 on my new macbook pro. Error message, "licensing for this product has stopped working".
How can I disable my old macbook DEAD pro CS4 and activate CS4 on my new mackbook pro?
Hi Christophe,
Please visit: https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html
Contact technical support for assistance:
https://helpx.Adobe.com/in/contact.html?step=CCSN_adobe-ID-signing-in_stillNeedHelp
I hope this helps.
Concerning
Megha Rawat
-
I just installed recognition speech dragon, but when I try to open this msg of error says "cannot find media device - Hosea t check if your computer has a sound card or if the wave multimedia component is missing from the sound card.» my monitor has built-in speakers and I can listen to music, news, etc.
You have a microphone? He is looking for an INPUT device, not a one OUTPUT. Also, check device manager to make sure that you have not a driver problem. To get the Device Manager, click Start and right click on computer, then click Properties. Click Device Manager, and then look for entries with? or! beside them, which indicates a driver problem. Finally check that your microphone is plugged in the right place on the computer, unless it is based.
I hope this helps. Good luck.
-
I don't know why my PC did this for me as I install games in the past, I tried to install the games, are not ancient Rome SpaceInvasion.fr and medieval SpaceInvasion.fr.
PLEASE GET BACK TO ME AS SOON AS POSSIBLEHi RyanTemple,
· You have changes to the computer before the show?
Follow these methods.
Method 1: Try to install the game as administrator.
HOW TO: Use the RUN AS command to start a program as an administrator in Windows
XP
Method 2: Follow the steps in the article.
How to solve problems when you install or uninstall programs on a Windows computer
Method 3: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click restart to restart the computer.
-
Original title: Win hardware problem. 7 PRO
Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.
The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.
-Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)
Or they are corrupt, try to get a new copy and try again.
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
-
Exe to install Microsoft has stopped working.
Hello. I'm running Windows Vista 64. I try to install the game of Microsoft Age of Empires 2 and the installation program runs completely towards the end, then the message ' Autorun/setup of Microsoft has stopped working. This happens when I try to install any game.
I also waiting for updates to download and install, and everytime I try, it starts to install the update and then I get the same error at the end of the installation. I scanned my whole PC for any virus threats and found nothing. I also tried a "clean boot" as I saw suggested on these forums and that has not worked either. Any help would be appreciated.
Try right click on the actual Setup.exe and choosing the option "Run As Administrator"? Perform, even if your user name is an administrator.
Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box. This will open your Temp folder, there, you can remove all Windows will allow you to do.
It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.
Sometimes other software, especially security type programs, can interfere with your facilities.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Desktop Window Manager has stopped working after installing Defender Pro 2012 5 in 1
Hello
My father has a Windows Vista. It works very well. Until we installed Defender Pro 2012 5 in 1,
It was a bit slow... the screen flickers of its lights for a few seconds every 10 minutes, I get this... I already have contact Defender Pro, and they said that it was not their fault.
Help, please!
DESKTOP WINDOW MANAGER HAS STOPPED WORKING
Windows can check online for a solution to the problem-> online and are looking for a solution (recommended)
-> closeAPPCRASH
Application name: Dwm.exe
Application version: 6.0.6002.18005
Application timestamp: 49e02696
Fault Module name: ntdll.dll
Fault Module Version: 6.0.6002.18327
Timestamp of Module error: 4cb74dd3
Exception code: 80000003
Exception offset: 0000000000045f00
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: 0fef
More information 2: 0d8b4b37a0c1e529a7398b6615cc3528
Additional information 3: f196
Additional information 4: acf765d48a0657c8822f379a6b5f3b91Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Sorry to tell you,
I already solved the problem.
Just to let you know, I buy the product, because
I used the free and they don't really work (IN MY OPINION).
Anyone has this PROBLEM (appcrash)
Go to start
Click on Control Panel
go to appearance and personalization
Click on appearance color of windows.
then click on settings in the appearance of progress.
under the gaze of point for the theme of basic or something like that.
Want more info on Dwm.exe?
Click here-> http://www.howtogeek.com/howto/windows-vista/what-is-dwmexe-and-why-is-it-running/
Maybe you are looking for
-
Here are a few screenshots: http://ImageShack.us/a/img541/9702/allzemenusarewhite.PNG http://ImageShack.us/a/img38/1016/alsothisone.PNG http://ImageShack.us/a/img89/1509/dontforgetthecontextmenq.PNG http://ImageShack.us/a/img109/9877/nowijustdonteven
-
Airport utility drops Airport Extreme A1264
Hello I try to configure my Airport Express A1262 with firmware 7.6.4 (AE) as a Basic airplay for my stereo. It is connected by wifi through my Netgear router C6250 (NR) acting as internet router and wifi base by 'join them a wireless network' in the
-
None of the new photos or videos. even in true colors (or n/b just) I want to colouring of back to normal for this screen
-
can I store movies copied to my computer until the im ready to burn to dvd
can I copy a dvd on my pc and store until I'm ready to burn to dvd and where and how I can storeiy?
-
PopupMsgBackup.exe does not properly
When starting my computer, the message: poster popupmsgbackup.exe doesn't work does not correctly and I don't know how to solve this problem so that the message does not apear more. I don't know what it is exactly and what it is has purpose or if it