I burned some media files on a DVD-R. However when I tried to burn another point, I have a display message asking me to format the drive.
I have vista Home premium with IE9. I burned some media files on a dvd - r. However when I tried to burn another point, I have a display message asking me to format the drive. I do not understand what that the drive has been formatted. I know from a previous answer that I format the disk, then all the content wil be removed and so I don't want to do. But how do I continue to burn items on the disc. I know everyone is busy here, but I hope someone finds the time to answer. Thank you for being useful to me recently. sincere love to all,
Did you close (or complete) of the DVD when burn you first your files on it? If you do not email us any more data on DVD-R, you will need to use a second DVD-R disc.
Tags: Windows
Similar Questions
-
I was able to do this on my XP desktop but it crashed and now I use my 64 bit Vista laptop. There must be a way that I don't see.
Sorry, but your reply ignores the problem that is the threat to format the disk and erase the existing content if you download a file on this disk. Finally, I discovered that the solution was disguised by the ambiguity of the software. If you choose "mastered" it of no problem even if the explanation of 'controlled' looks that would destroy the capacity of the disk to receive or delete files "under control" and future - only formats the drive before you download a file on it! Equal stupidity on my part and the author of the software.
-
I bought the ability to convert PDF files into word documents. However, when I opened a PDF it does not include the right panel that had been giving me the option to convert. After spending 30 minutes on a cat, I've learned that (1) the option is not on the right side panel on Acrobat 9 Pro, (2) it is on the top. What should I do to convert my files?
Look at the file menu.
-
I get an error indicating cc cookies dir: cannot do file / cookies: permission denied (error 13) when I tried to download the installer of creative cloud on my Mac. Can anyone help with similar pop-up window? I try to get a trial version of CS5.
You don't need to involve creative cloud to install try the trial version of CS5...
You can download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
-
Vista handles the media completely differently, and I hate it. I want to deal with media files as normal files, so I can see, size, date, etc. All previous versions were very good.
Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html. Default behavior is to select the model based on the first type of file placed in the folder (you must choose something). Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.
It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program AutoSizer to resize them.
Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html. This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.
Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)
I hope this helps in your situation.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi ennouari,.You have a burner installed third-party software?Check if other media works fine in Windows Vista.You can follow the methods and check if the problem persists.Method 1:Uninstall any third-party software of engraving and check if your DVD drive works.Method 2:You can follow the steps in the articles below and check if the problem persists.Step 1:Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsStep 2:The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461Step 3:When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Note: You can click on 'repair' wherever it is necessary.
Method 3:If the steps above do not solve your problem, I suggest that do you a System Restore to the point that your DVD player was working fine.Method 4:If none of the methods and the steps work, check if the drive works in safe mode .Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
Original title: Windows 7
I am using Windows 7 Home Premium 64-bit SP 1 that have previously been installed then bought my laptop. Product key number is fixed under the laptop.
I need to format my drive due to some problems and having to reinstall Windows 7. can I use the same product key and where can I get the installer of Windows 7 because I don't have it.
Thank you
New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
This is how the recovery partition is accessible to most popular brands...
For Dell, press CTRL + F11 directly after switching on the device
For HP, press F11 directly after switching on the device
For LG, press F11 directly after switching on the device
For Toshiba, press and hold "0" BEFORE and during the power upward
For Acer, press and hold ALT + F10, as soon as you see the logo
For Asus, press F9, as soon as you see the Asus logo.
For Samsung, press F4 to the power upward...
For Fujitsu, press the F8 key directly after the power
Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"
Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".
For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.
It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.
Given that this option is no longer available, what are your options? See the article for more details:
How to: What are my options for Windows 7 reinstall media?
Make sure you scroll down and read the section:
What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?
-
MEDIA CENTER STOPS WORKING WHEN I TRYING TO PLAY MOVIES THAT I HAVE DOWNLOADED
Media Center will not play any movie I have in my library, it plays fine in the music video, the same movie will play well when I use Windows Media Player by itself without open Media center.
Is there any solution for this?
Hello KINGPIN62,
Thank you for your response.
To check, are video files in a monitored folder of Windows Media Center?
To add or remove folders to be monitored by Windows Media Center, see the following steps:
· Since the Windows Media Center start screen, navigate to tasks, and then click settings.
· Click configuration library > add folder to watch and then click Next.
· Click one of the options under which folders you want to add, and then click Next.
· Naviguer, navigate to the folders you want to add, and then select the check box next to each folder. Click next and then click Finish.
Alternatively, you can try to perform the clean boot to verify if a background program may interfere.
To perform a clean boot, see the link below:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
You can also check if the necessary codec to play the video files is installed.
For more information about the location of the codec, please visit the link below:
Playing videos in Windows Media Center: frequently asked questions
In addition, you can also check with the seller or store movies downloaded for additional codec information for video files.
Please let us know if the above steps help you to solve the problem for you or if you need assistance.
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have several WIN7 SP1 teacher workstation via SMB connection to an OS X Server 10.8.3. When copy files I get the following warning "are you sure you want to copy this file/folder without its properties.
I don't have the option to format the location of the copy in NTFS. The OS X 10.8.3 server must have the disks formatted HFS +.How can I disable this setting in custody or thing WIN7? There must be a method as another server, I have does not have this warning on WIN7 machines. My another server running Server OS X 10.6.8. I have not received this warning when copying files using WIN7 OS x 10.6.8 Server.I searched extensively, but have yet to see a response that does not formatting of the location of the copy in NTFS.TIA.MHi Tia,
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
http://social.technet.Microsoft.com/forums/en-us/category/w7itpro
-
I recently bought a Photoshop CS6 upgrade. (Dec 9, 2014). Today, I downloaded the file (Photoshop_13_LS16.7z
This downloaded OK
When I tried to execute the file (Winzip) I received the following message
"Installer failed initialize." Could be due to a missing file. Please download Abobe support Advisor. »
I tried to do and he told me that Adobe support Advisor no longer exists.
Could you please say a solution.
Extract it to a different location inside a folder dedicated and make sure not to destroy the hierarchy of files and folders within the archive. Also run the installation with privielges stuff and sufficient user security turned off.
Mylenium
-
Reloading of Window Media Player 11 after losing all paths to find the playlist of stored music. Restored to the former player. Downloaded the file replacement. In the download process has been requested to install "Windows Vista build". I just want to know I'm not a mistake by loading something written for Vista for my XP machine.
Thank you
Doug
Hi Doug,.-What is the link that you used to download the media player of?Here is a link to download Media Player 11 for the 32-bit version of Windows XP:Be sure to visit this link before you download Media Player 11: -
How can I get the recognized without any instructions? Why no instructions? I was at this for hours. Should I move them to the hard drive? Backup looks so good, but I need my files.
Hello
Here are the different ways to back up and restore
and a link to the appropriate forum for the best help available for your question
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
If you have problems, it's in here is a forum for microsoft specifically for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
-
I used the migration assistant and an external hard drive to transfer everything from my old macbook pro to my new. All files appear to have burst, but when I wanted to add a comment of the photo on FB, the library is grayed out and the album of events could not be considered. Any ideas how I might solve this problem?
Use the media browser - towards the bottom of the download on the left window under media ==> photos ==> Photos
LN
-
He asks me to specify a location and also proposes to ignore this file that I don't know what to do
Hi Lisa,
You are able to correctly install the other updates?
You can follow this link & check if the problem persists:
How to troubleshoot an installation fails in Windows XP Service Pack 3?
Hope the helps of information.
-
I downloaded the drivers needed from the Dell site and the burner will not work. The computer was again in March 2009. Not sure where the drivers should be located. I downloaded on: win\syswow64\drivers\afc.sys. I've looked everywhere and tried to find a dialog box offering the option "update drivers" for this device. Could not find a way to do except Dell and that doesn't seem to work. The 64-bit system has no 'Device Manager' that I can find. When I look at the properties of the burner, the link to "find a solution" is not highlighted.
Hello DanHenry,
Try the miracle solution at this link: http://support.microsoft.com/kb/314060 but before you uninstall all third-party software (example: Nero, Roxio, iTunes). You can reinstall your software after you reboot your system. Please let us know if this helped you. Make it a great day!
"In the end, the love you take, is equal to the Love You Make"
Maybe you are looking for
-
How can I select photos to iCloud applications when this option has been disabled?
I'm puzzled. I tried to add a photo in the Mail, but the picture does not appear. I was puzzled that only about 3,000 of my 48000 pictures were in the media browser and decided to investigate and even rebuilt my entire library without change in sigh
-
Satellite Pro M70-235: She Dual Channel?
Can someone tell me if this model dual channel? Thanks for the reply
-
HP Pavilion Notebook - 17-f122: Bluetooth
I want to know if my system is compatible with Bluetooth? I have upgraded to Windows 10 and in my programs and features, I have the Bluetooth Broadcom drivers, however, in the center of the action, there is no Bluetooth option. Thanks for your help.
-
4625 printer can't find my network SSID
Hello I tried for hours to set up my HP Deskjet Ink Advantage 4625 to connect to my network without success. When I run the DeviceSetup.exe I chose the option to convert the USB connection to my wireless printer, there, I have two options: leave the
-
Cannot install Epson XP-215 printing software
When I try to install my XP Epson-215 software on my laptop I get the message "error occurred [0-1].