I can access network, but not the internet.

I am able to access my network but not the internet.  However, I can get on the internet if I use parallels.  Does anyone else have this problem? If so, how have you managed to solve.  I rebooted without parallels and nothing changes.  Any suggestions?

In the menu bar, you select

 ▹ System Preferences... ▹ ▹ ▹ Advanced TCP/IP network

What values are given for the following?

Configure IPv4

IPv4 address

Subnet mask

Router

Tags: Mac

Similar Questions

  • Can connect to the network, but not the internet, a "Local" access only

    Just installed a new router and am now unable to connect to internet on my HP laptop. The laptop is running Windows Vista 64-bit Service pack 1. Pulling him diagnose & repair window returns a message indicating "your modem or router is not available.

    I tried several things to get the internet to connect. I have reinstalled the driver, turned off the firewall, disabled the Internet Version 6 (TCP/IPv6) Protocol and manually configure the network connection.

    I have a desktop computer with a wireless adapater that performs the exact same OS as the laptop and I have no problem with this connection.

    I am able to connect to the internet if I connect the laptop to the ethernet cable. I am completely confused and would appreciate any advice!

    Hi Ima be,

    You can follow the steps below and check if that helps you solve the problem.

    Method 1

    Try to power cycle the router and the computer and check if it helps.

    On the PC:

    1. Save your work and restart the machine.

    On the router or modem (if wireless printing):

    1. Unplug the router and the modem.
    2. Wait 30 seconds.
    3. Plug in the modem and wait for it to come to the ready state.
    4. Plug in the router.

    After you put cycle check the connection between the router and the computer.

    Method 2

    If the steps above do not help, you mayreset TCP/IP stack. To reset access the link below and either click on "Fix it for me" or follow the instructions to fix it yourself:http://support.microsoft.com/kb/299357
     
    Disable the IP helpdesk:
    1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter
    2. scroll down to the IP assistance service, right-click on it and select Properties
    3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
    4. then click on "Stop" to stop the service from running in the current session
    5. click on OK to exit the dialog box

    Method 3

    Disable IPv6 and remove IPv6 virtual cards:
     
    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.
    NOTE: You should do this for each network connection, even if they are disabled.

    Method 4

    Disable the DHCP Broadcast Flag:
    Link: http://support.microsoft.com/default.aspx/kb/928233
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.microsoft.com/kb/322756.  How to back up and restore the registry in Windows
     
    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
     
    To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:
    1. Click Start, type regedit in the search box, and then click regedit in the list programs.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
    3. Locate and then click the following registry subkey:
    4 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}
    5. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.
    6. on the Edit menu, point to new, and then click DWORD (32-bit) value.
    7. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.
    8. right click on DhcpConnEnableBcastFlagToggle, then click on modify.
    9. in the value data box, type 1 and then click OK.
    10. close the registry editor.
     
    By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.
    You can also try uninstalling and reinstalling the driver for the wireless card.

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • ASUS Infinity wifi connects to the WRT54G Router and network, but not the internet

    I have a WRT54G work throughout our House. It has 4 ports for wired ethernet and multiple wireless connections works without any problem. Currently my Droid phone, Tablet iPad and 2 laptops to connect and move to the internet via a wireless connection.

    Today, I bought a new Asus TF700T Infinity tablet.  I can so he can connect to the router, see the network and the router can see the Tablet Infinity (assigns an IP address), but no internet access.

    I need some ideas here, or suggestions as to what tools I can use to see where the traffic of the Tablet is blocked.  The newspaper on the router shows me nothing. I guess there is a port blocked by the router, but no idea those who.

    Tried reset hard and a firmware upgrade does not.  In fact the latest firmware upgrade (4.21.5) watered the entire network, so I started 4.21.1

    Maybe it's not a router issue maybe that's the problem with the Tablet? Can ping you the ip address assigned to the ipad? You can also try t o assign a static settings on your tablet. If these things still do not work, you may need to contact asus support.

  • My laptop, connect to the network, but not the internet!

    My laptop connects to the network media blank but not internet. My roommates using the network can connect to the internet. I tried various things but not vain. I also tried to get in touch with the Virgin on this subject, but they can help. Is it my laptop and is there something special I need to do with a computer hp laptop. Help, please! Thank you!

    Hello

    On the Start Menu, click programs principally made, click Accessories, right-click on command prompt and select "Run as Administrator".  In the prompt, type the following commands, pressing on enter after each command.  Include spaces in the commands, as indicated.

    ipconfig/flushdns

    nbtstat-r

    nbtstat - RR

    netsh int ip reset c:\resetlog.txt

    netsh winsock reset

    Type exit and press ENTER.  Restart the PC and see if you can log in now.

    Kind regards

    DP - K

  • 2 13 pro tablet of yoga - to connect to the network, but not the internet

    Hello!

    I got my new yoga today and immediately connect it to wifi...

    It connects to my home but not internet network (or connection very very creepy)

    tried home through my phone LTE and still...

    tried by bluetooth and same result... slow as hell... maybe approx. 10 KB.

    im looking good on the web and don't find anything...

    probobly you are the people with the experience...

    help would be appritiated!

    Kind regards.

    Hey guys quick update!

    After sending the lenovo Tablet and a few screams (sad that we cannot otherwise)

    they replace them with sealed brand new...

    so thanks for the help!

  • I can create it but not the NAME of a new folder... any suggestions? Vista SP2 Marty

    I can create it but not the NAME of a new folder... any suggestions?  Or as the administrator or user, even when the user is an administrator.  GACK!  This is new behavior, week or two...  Vista SP2 Marty

    Hi Marty_McGrath,
     
    I suggest that you want to run the file system (CFS) Checker scan that might help you to solve the issue.
    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.
    2. right click on cmd in the list programs and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue
    3. at the command prompt, the following line, and then press ENTER:
    sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

    Follow the instructions in the link below for more information on scan SFC.
    http://support.Microsoft.com/kb/936212/

    Check whether the problem is resolved.

    If this does not work, you can try to create the new user account by following the instructions in the link below and check if it works.

    Difficulty of a corrupted user profile
    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Connected to the point of access, but not the internet.

    I install an access point using a router. With windows 8.1 I am able to connect to this access point and internet access.

    But not other computers with windows 7. There are connection but wireless adapter show without internet access.

    Try almost everything that I know. Am I missing something?

    I hope someone can give some advice? Thank you very much

    1. you can try Microsoft Fixit from the following link:

    http://support.Microsoft.com/kb/299357/en-us

    2. press the key Windows + R-> type services.msc-> press ENTER. Click Yes if prompts UAC. Then, look for the WLAN auto configuration service. Double-click it and check whether the service is started and running. In addition, make sure that the startup type is set to automatic.

    3. If the steps above could not solve the problem, kindly open command prompt, run the following command and post the result here:

    ipconfig/all

  • Laptop HP G70 connection to the router but not the internet

    I have a laptop HP G70 running windows 7, I got a new router installed. My computer to the router, but not to the internet links. I tried the software updates for my drivers running, doing all used to end router for example change etc channel/parameters/IP wifi. I tried to turn off the wireless, reset the router and re enabling it does not work.

    It will connect to the internet ethernet of nis.

    My laptop connects fine with other networks if it is not wireless.

    All other devices are connected to the router.

    Please help this is extremely frustrating.

    You are the very welcome.

    I compressed the file and downloaded on my Skydrive account, which I shared the link below.

    Download, unzip and run the file called sp54972.

    https://onedrive.live.com/redir?RESID=832F4957D2E51B93! 263 & authkey =! AEOhdjA3QVhETy0 & ithint = % 2czip

  • can connect to my laptop to router but not the internet

    I got my son a laptop is a fujitsu, XP home, 1.73 dual core. When I try to connect to the wireless network, it finds my router Belkin Surf N, but it connects with local access only, or limited access when I connect via an ethernet cable to the Web without problem.

    Help, please.

    Hi kevinattard,

    Did you do any hardware changes or software on your computer before this problem?

    You can follow this link completely and check if the problem persists:

    Windows wireless and wired network connection problems

    Hope the helps of information.

  • Laptop connects to the network, but not Internet.

    I'm trying to fix a HP DV6000 laptop that can't connect to the Internet. It is running Vista Home Edition. It will connect to my LAN cable or wireless network, but not the Internet. I checked a few things and discovered that the TCP/IP protocol is missing. When I try to add using properties of LAN, TCP/IP is not an option.

    I did a complete system restore. System set!

  • Computer connects to the network, but not to the Internet, connect to the only local

    Hello world

    OK, so I have a HP computer with the installed version of Windows Vista Home Premium 32-bit. I've had it for almost 2 years now and have had no problems connecting to Internet... until now.

    I can connect to networks... both wireless and cable, but I can not get Internet. I used the IP, subnet mask, gateway and server settings DNS to another computer that works with this specific local network just to see what happens... my computer has failed.
    Until recently, I could connect to this WiFi connection in a coffee shop, but the last time I tried it didn't work. I've connected to the network but not the Internet. He told me that the DNS server did not. I'm starting to think that something is wrong with my computer.

    I saw that the solution for some people running the Norton removal tool, however I had uninstalled Norton almost as soon as I got my computer 2 years ago and ran McAfee instead. I don't think that Norton should have an impact on me more.

    Is there a solution to this problem... or I'll just have to try everything that is out there?

    Thanks for your help!

    Hi MomPlaysBass,

    Finally, my problem has been resolved - it wasn't my computer after all. The modem may only be connected to a computer. If you want to connect to another computer, you can connect the computer to the modem and then put it back. My computer worked fine after that. Whenever we want to switch between computers, even if I have to reset the modem.

    I don't think you have the same problem, but just in case, you can try to reset your modem - it's a button on the back or a small hole that you can reach with a pen... Hold the stylus for about 5 sec or maybe a bit more and then let go. That should reset your modem and might help you with your problem. Your computer should also have created a restore point... If all else fails maybe you can try to get back to the final point where your computer worked.

  • I can connect to the local network, but not to the internet

    Why in an internet connection, I can connect to the Local network, but not to the Internet.
    I have valid IP address and configuration is good.

    I recommend you read some threads here in the forum about similar issues.
    If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
    Using the WiFi network, you must check if the common WLan parameters are favourable;
    Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

    Good bye

  • I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

    I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

    Hello

    Maybe this can help, http://www.ezlan.net/wireless.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • How can IM connected to the wireless network, but not to the internet, I fix?

    my laptop can no longer connect to the internet, but for the wireless network I can view other computers on the network, but can't go on the internet it says unidentified network.
    I took all the troubleshooting steps to resolve this problem without success.
    all ideas

    Scott,

    Are you the same Scott, I tried to help the last month? If this is you, I left a couple more views. In one of them, I explained that exactly the same problem you encounter happened on my son's computer. I just disabled the router, waited for about ten seconds and he turned his back and that's what it took. I used actually utility of Windows troubleshooting and he advised me to do.
  • HP Photosmart 6510 series connects to the network and Internet, but not the computer.

    Hey all,.

    I have a desktop H8-1228 and 6510 e - printer.  I got both products at the same time.  I did the initial installation, and everything worked perfectly.  I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.).  Recently, I made a trip for two weeks.  I turned off the printer.  This seems to have been a mistake.  Now, he will only contact my network and Internet, but not the computer.  The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer.  I did this many times by printing the HP's Configuration Page from the printer screen.  I also used Windows "Add a printer" without success.

    I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel.  A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation.  There can be no. :-(  I did the installation with the same problems that I had all the other times that I tried to install it.

    No help from you the printer experts will be greatly appreciated.  I'm not a novice as you can see.  This situation, however, launched my posterior. :-))

    Hi old_geekster,

    You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.

    HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.

    I would like to know what are the errors you receive?

    http://www.HP.com/go/tools

Maybe you are looking for

  • Change AppleID on iPad Cloud adjustment

    I've updated my apple ID and have now updated on almost everywhere, except the cloud parameters.  My iPad keeps asking for the password on the old AppleID, that does not work.  I tried approval, but I get to the final step, it is making me enter the

  • Spectrum XT Pro Ultrabook HP: DST short hard drive failed

    Product B8W13AA #ACB. Failure ID: Q0837G-1GH87L-XD7WW1 - 60S 503. What it means?

  • the pulse setting, Sandra

    Dear all, I came across a NIMath() GetPulseParameter (CNiVector & form of wave, PulseParameter & param).  I know how to handle a CNiVector data type.  My problem It is the structure of PulseParameter.  It is the structure in the CNiMath class.  Pleas

  • Why the price of HP memory for h8 - 1360t so high series?

    Wow. It costs * much * more that other sellers around when go it beyond 8 GB. From 12 to 16 GB costs (yelp!) 120 USD.  It's an additional 4 GB. Madness? or is there another reason of 1300 DDR3? Any recommendations of 3rd party seller? Hyundai is the

  • How to pass session managers to test the support?

    I tried the examples, but could not learn something useful. I have a DLL of LabWindows/CVI the following, and I am able to use functions (selection) the DLL in TestStand measures. int DLLEXPORT OpenSession (unsigned long * session, signed long * Erro