I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

Similar Questions

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel?

  I've recently updated my firefox to my laptop. No longer can I do a search with Google without getting a message that the address of the site/is not secure. How to cancel? The only search that allows me to see whatever it is is Yahoo that I prefer not to use. In addition, I have to click through a series of tabs to make sure that I know that Yahoo does not feel that the site is secure before it connects. I must tell you that I have strongly dislikes this upgrade and want to return to the old Firefox.

  What is you receive the exact error message? Did you check your date and time? Refreshed Firefox? Refresh Firefox – reset the parameters and modules

• I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on

  I get a message that my Windows Security Center is not on, but when I go to the center of the Action it won't let me turn it on.  What should I do?

  Hello

  · You have a third-party security software installed on the computer?

  · What is the error message that you receive the error code when you try to turn it on?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  Follow the methods below:

  Method 1:

  Make sure that the Security Center service is configured properly, and then start the Security Center service. To do this, follow these steps:

  a. click on start, click on run

  (b) in the Open box, type services.msc

  c. on the right side of the window, locate the Security Center service in the list of services.

  d. right click on Security Center, and then select Properties.

  e. in the drop-down list startup type, select Automatic (delayed start).

  f. under service status, click Start.

  g. click on apply, click OK, and then close the Services window.

  Method 2:

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• I get a message that my Master Collection trial has expired.  I can't read .pdf documents.

  I get a message that my Master Collection trial has expired.  I can't read .pdf documents.

  Hello

  The message you receive simply States that the Master Collection trial has expired.

  You would need to serialize/license it to display PDF' and other tasks.

  Concerning

  Sukrit diallo

• XP5.1 SP1a download "the server has not responded.

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  I had to reinstall XP 5.1 and I try to install SP1a.  On the attempt to download - I get the message "the server has not responded.  I have an internet connection - I asked the download from the MS. download site  For some reason machines updates do not work and I need to install SP1a to get to SP3. Location that is not responding is 'HTTP:xpSP1.micrsoft.com/isapi/pstream3.dll/xp/SP1.USA.1106a '.

  THX

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Reset.

  5 install the SP3. Reset.

  6 switch to IE8. Restart TWICE.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• Windows SP1 - "the server has not responded.

  Hello!

  I perform a clean installation on the machine of my old mother. In fact, service of the only operation I can install is Windows XP Pro. I downloaded the sp1aexpress_usa.exe file to automatically perform the update.

  After a few checks performed by the program, he prepared to download the Service Pack 1 files. A few seconds/minutes later, the following error message appears: "the server has not responded.

  I spent nearly 3 hours to dig the web to see if I can download SP1 from somewhere within Microsoft, without a bit of luck. Is it possible to upgrade correctly from this machine to SP1 - SP2 - SP3 and thus now or should I format the computer once more and try an operating system open source?

  Thanks for your time

  Pablo

  SP1 (SP1a) is totally useless. All you need to do is to install SP2 and SP3. For more details:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/recovery-CDs-and-XP-Home/3256a8db-F1C1-40f5-A6AC-82f4c3c4266a

• I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/filter

  I just bought, installed and registered 6 Lightroom. When I try to launch the product I get a message that says "an internal error has occurred" - could not create the required file: admin/Users / / Library/Application Support/Adobe/Lightroom/Filter Presets. Any ideas on how I can fix this?

  Hi Anthony,.

  You must go to the location: admin/Users / / Library/Application Support/Adobe/Lightroom

  Hold down the CTRL key and click on Lightroom, click on read the information and click the permissions tab.

  Provide the permissions to read and write to your identifier and then close.

  Then reopen Lightroom. You should be able to open Lightroom.

  Please let us know if it helps.

  Kind regards

  Tanuj

• If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.

  "Attachment Id has wrong format", we hear wat!

  If you use Hotmail, I try to send an e-mail, I get a message error that says 'attachment Id has wrong format", and if the message will not be sent.  I use the Google Chrome or internet explore and cannot send new or respond to emails without getting the same message... help plsssssemai

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Cannot access the Wi - Fi connection with the error: "DNS server is not responding" on Windows 7

  So, recently, I installed a new router. After restarting my modem as indicated in after connecting the router to the modem, I was surprised to see that the wireless network has been renamed to (name) 2. I continued with the installation and soon found that it happened too much to the network from the router, and none of them does not seem to work. They tell me that the DNS server is not responding. for the last ive tried day every last problem I can be downloaded on the internet and nothing seems to work. pls help

  Original title: renamed networks and will not work

  Check if your modem has a built-in router.  If so, it should be disabled until your router works.  If this is a new router, contact the manufacturer of the router.  They will help you.

  It is not likely a problem on your computer.

• While trying to install SP1a for Windows XP, the error is the following: server has not responded (Windows XP SP1a).

  Hello

  Recently, I reformatted and reinstalled windows XP on my old laptop. Looking to obtain service packs for it, I read that you need to start with SP1a... I did some research autour and many people are having the same problem, but nobody responded to the real problem. According to Microsoft, I install SP1a to install any other. The error is as follows: the server did not respond. If the server has been taken down or refuses connections. My internet connection remained active all attempts to access the server.
  Unless the information is wrong on the website, installation of SP3 won't fix it. All responses I've seen to this problem have been installing something you can't until you install first.
  Here is the link, in that it tries to connect:
  Connection to
  http://xpSP1.Microsoft.com/ISAPI/pstream3.dll/XP/SP1.USA.1106a.
  Here's the exact error:
  "The following error occurred during the installation of the Service Pack 1a attempted to download the files from the Service Pack 1 from the internet:
  The server did not respond. »
  Thank you.

  You should be able to download the Service Packs as a standalone installer at the following addresses:

  SP1a: <> http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=19751 >
  SP2 <> http://www.microsoft.com/download/en/details.aspx?id=28 >
  SP3 <> http://www.microsoft.com/download/en/details.aspx?id=24 >

  If you can not download to your computer, then use another machine to download the installation file and move it to your computer.

  You don't need to install SP1A.  XP Gold, you must install SP1A or SP2 before installing SP3.  I recommend that you start with SP2 and then SP3.

  "How to obtain the latest Service Packs for Windows XP"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• So my question was the only one who has not responded to our days, nice...

  I asked a question this morning and he is now 23:13 and I noticed that my question was the only one who has not received a response. My first time here, so I guess I'll have to continue to look elsewhere. My client site is screwed on all cell phones touch using the Chrome browser, so if anyone knows the answer, it would be very appreciated to receive an answer:

  Hello

  I created desktop, Tablet and mobile versions of a Web site. I looked at the site on my Surface Pro 3 and half left of the screen shows the site, the right half is empty. What happens on other touchscreen tablets as well. After searching through a large number of forums, I realized that the problem is with Chrome. I looked on the Surface Pro 3 with I.E. site and it fills the screen and looks like it should. I have not found a solution to this on the forums, I see responses by Adobe on some forums saying "it is a matter of Chrome. Chrome is used by about 70% of users, then it is a big problem. Is there a fix for this yet? By releasing sensitive Muse I can redo this site but meanwhile I need a fix, the site is unacceptable to my client when saw touch-screen computers laptop thank you.

  Go to the properties of the Site. Select the tablet. Uncheck the box "redirect office" and re - publish.

• I can no longer send new e-mail messages or respond to those received

  I was not able to open the new email or reply to e-mails received since two days.  I can nope my Inbox and all my files and I can open all my old receipt of emails but cannot respond to everything.  If someone has had this problem and how did you solve it.

  Hello

  Please provide the following information in order to study your issues:

  • The same problem occurs when accessing the account by another browser?
  • The same problem occurs when accessing the account by another computer? Internet connection?

  It is possible that you experience this problem because of your browser.  We suggest that you optimize your browser.  To optimize your browser, please follow this link to http://www.wikihow.com/Clear-Your-Browser-en Cache

  For the Internet Explorer browser, please follow this link.

  http://Windows.Microsoft.com/en-us/Hotmail/optimize-Internet-Explorer

  Alternatively, you can use HTTPS as an another workaround and to ensure that the session is secure.

  1. go to your https://account.live.com/managessl
  2. click on the box always use HTTPS when I connect to Hotmail .
  3. click on Save.

  Thank you!

• Windows XP service pack 1 fails with the error "server has not responded.

  After that a delay of a minute or two, running the SP1a update .exe (sp1aexpress_usa.exe) well failure I have an active Internet connection

  It does not work every time with a "the server has failed" after telling me that this error has occurred when trying to download files from XP Service Pack 1.

  I tried four times over a period of three hours is not an appearance of time.

  Thank you

  Jim

  Hi Jim,.

  If you already have the Service Pack 1 (SP1) is installed, we do not recommend to install SP1a. Instead, I you suggest to download and install the Service Pack 2 (SP2) and then update SP3 to continue to receive.

  For how to obtain the latest service pack, see How to obtain the latest Windows XP service pack

  See also: information about Windows XP Service Pack 3

  Note: The Support for Windows XP with Service Pack 2 (SP2) will end on July 13, 2010. If you are running Windows XP SP2 after support ends, you will not receive updates of security for Windows. To maintain your Windows XP computer up-to-date download Service Pack 3 via Windows update.

• Getting a message that my copy of Windows is not genuine. I want to enter my key, but it is worn above the bottom of the system. How can I fix it?

  Windows Vista genuine - WGA false positive

  Well well, Hello. I bought a HP laptop with Windows Vista, about 4 years ago and recently the "not a copy genuine' warnings began, he told me to validate my Windows I had put in the code I can find in a sticker below my laptop and the problem is that the sticker is there, but the laptop is 4 years old and most of the towers it , so the code and most of the things written in the sticker is worn. I can't get the validation code and I would like to know what I can do to validate my windows or get rid of these annoying warnings that will let me set up a wallpaper, which is the most annoying part. Thank you.

  Hello

  You can check this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-is-showing-as-not-genuine/6efea9fd-70a9-4530-88c8-93fd7b2d5484