I can connect is more to my connection Wireless on my HP ProBook s 4430.

Similar Questions

• Can connect wireless Compaq Presario SR5214X desktop PC?

  Hello

  I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

  Concerning

  Hello

  Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

  Wireless PCI card

  Kind regards

  DP - K

• Laptop can connect wirelessly, but not through cable utp to the internet. Help!

  I tried to connect my computer laptop windows 7 to the internet using a utp cable. Unfortunately, without success. Works with wireless, but in my dorm, I cannot use internet via cable. I tried to turn off the wireless, but that did not work either the comouter does not recognize that the cable is already connected. Please help me solve this problem.

  Thanks for your help in advance! :)

  I would check the cable carefully.  Sometimes, some of the wires are loose from the plug.  See if the laptop can connect to cables in other places.  If possible, the problem is with the cable and not on your computer.

  Good luck.

• HP G60 - 117US LAN adapt will not connect. Vista Ultimate. Manager displays without problem. Can connect wirelessly. Use Nvidia MCP77MV chipset__

  My laptop will be wired adapter not connecting, Device Manager shows no problems

  Hi Baker,

  (a) if it works well before? You get a specific error message?

  (b) don't you recall making any changes to the computer before this happened?

  Connect the laptop to access the internet cable and then try to follow the steps:

  Step 1: check if you are able to receive the IP (Internet protocol) address, run Ipconfig/all at the command prompt.

  Click Start, run, type "cmd" (without the quotation marks), and then click OK to open a MS-DOS command line window. Type "ipconfig/all" (without the quotation marks), and then press the ENTER key.

  ·         Do you have an IP address?

  ·         You get the addressing APIPA (automatic private IP addressing)?

  Ø If the line "Autoconfiguration Enabled' says 'Yes', the 'Auto-configuration IP address' is 169.254.x.y (where x.y is the unique client identifier), then the computer is using AUTOMATIC private IP addressing.

  Ø If the line "Autoconfiguration Enabled' says 'No', while the computer does not currently use AUTOMATIC private IP addressing.

  Note:  With APIPA, DHCP (Dynamic host configuration protocol protocol) clients can be automatically configure an IP address (Internet protocol) address and subnet mask when a DHCP server is not available.

  If you cannot assign an IP address and then try step 2

  Step 2: disable the DHCP (Dynamic host configuration protocol protocol) Broadcast Flag:

   

  Run the fixit available in the link below to disable the DHCP broadcast flag

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/default.aspx/KB/928233/en-us

   

   

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

   

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Everyone in the House can connect wirelessly with the exception of my laptop wireless

  Original title: Mr. gustavo

  Hi can you please help me, everyone in the House are connected to internet wireless lapto, Im the only one can not get internet connection with my wireless lapto, can you please advice me. Thank you very much.

  Rigards, gustavo

  Hello

  ·          What happens when you try to connect to the network?

  ·          You get the error message?

  Method 1: Try the procedure described in the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Method 2: Reset the TCP/IP settings:

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357

• I can connect wirelessly to the network, but cannot connect to the internet.

  Ethernet to wireless connection?
  
  

  Hello. I have a Dell Dimension 2400 desktop computer and bought a 50M USB WiFi Wireless LAN 802.11 n/g/b adapter so that I could move my desk in another room and a wireless connection.  I was able to connect it to my wireless printer but am not able to connect to wireless internet.  Is this possible with this computer? If so, how?

  Hey DLD

  Try this link. A lot of good things that have worked for me.
   http://www.SevenForums.com/tutorials/55419-Internetwork-Troubleshooting-Guide.html

• Can connect you wirelessly on a Pocket PC V36?

  I have a Pocket PC V36 and I was wondering, how can connect wireless to this topic? This is the version 4.20.1081 and the 2003 version.

  Hi rafty12,

  You will need access to the phone user's guide to learn how to configure it, see the link below to download the user guide on the site to view sonic.

  http://ViewSonic.PT/support/mobilewireless/PocketPC/pocketpcv36/#features

• Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

  I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

  I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

  The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

• I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. It does not appear in Airport utility. Any suggestions?

  I just upgraded to a pace 5268AC router and can connect is more to my Airport base station. The base station does not appear in Airport utility. Any suggestions?

  Whenever you change the modem or modem/router to which the airport links... or... change your Internet connection process, the airport must be reset to the default settings and then set it up again to work with the new device.

  Your message did not mention if you did that, but if not... to perform a Hard Reset on the router of the airport would be the first thing to do, to follow in setting up the airport once again, just as you would if the airport was new and connection to your modem/router for the first time.

• LCM causes Essbase security to rewrite and can connect is more.

  When you use LCM and migration Foundation / Shared Services and loading it back from the file.
  
  He was crushing sort something with Essbase security so no users (including the administrator) can connect. Through the Regional service or work space / planning
  
  Any suggestions how to reset it? Is what Essbase is more connected to Shared services somehow. This is clearly a bug because it is impossible that this is possible. But hoping that someone has seen this before and allowed a work around.

  If you can. Log in to the system as a master administrator Essbase EAS and update the security of shared services.

  Otherwise, you must kill the essbase.sec file and make it reset the Essbase master user. This should be done carefully, but you can cause the environment to become corrupt if all steps are not done properly

• the officejet pro 8600 can connect more than one wireless router?

  the officejet pro 8600 can connect two separate wireless routers?

  Hi Thetinman,

  No, it is not possible that you can be connected to 1 router at the same time.

• can connect is more to Z10

  Something strange has happened my Z10 / computer (2007 Mac Book Pro, OS X 10.8). Did some changes tonight. I had left Momentics opened with SSH attached, but the app is not running.

  I unplugged the USB cable connecting my Z10. A few minutes later, I have reconnected and could no longer connect from the development environment. The Z10 gave a message trying to install the link on my computer. Link does not connect properly - don't list not my music, etc.

  I reset the phone and laptop. Same thing. Disconnected/reconnected the cable USB to Z10. This time, reinstalled link, since the phone hooked me on installing it. Now the link seems to be able to see the phone (although sync music hung) and I can browse the built-in flash and the SD card in the Finder, but I can still connect to the Momentics device.

  The specific error is:

  Unable to connect.  Make sure that the Wi - Fi or USB cable is connected, the IP address is correct, and mode of development.

  I can't watch the chips of debugging either. Same mistake.

  I checked several times that the development mode is on. I tried to change the IP address. No luck.

  Any ideas? I really need to get this working again (obviously).

  EDIT: actually... Perhaps the link is not connect properly. He told me that my phone has never been saved, which is false. He got the wifi by the name icon, and there is no explicit backup option.

  EDIT 2: randomly decided to turn off wifi. Finally asked my device by connection password and was able to start a backup. Unfortunately, I was stuck at "preparing backup" for a few minutes now. Don't seem to be getting anywhere at all. In the menu device Link, backup, restore, and delete are available - the rest of the options are grayed out.

  .. .and now it works. I put in flight mode, disconnected and plugged in. Link is finally able to make a backup and Momentics can connect for file browsing, SSH, etc.

  An index to monitor - when he's not working, Finder shows the aircraft mounted with an IP address that is not the IP address of development. I don't know why it took disconnects / reconnects as much to finally use the IP address of development.

  I hope that this had nothing to do with wifi turned off or in flight mode.

• Windows 7 freeze to the screen of welcome for even more 20 minutes before I can connect to my session

  Hi, im using win 7 ultimate on my computer dell laptop with 4 GB of RAM and I have a huge problem.
  in fact, when I turn on my laptop it freezes on the screen of welcome for 20 to 30 minutes until I can connect to my session.
  I have a defragmenting my hard drive, uninstall all the last microsoft update, do a virus scan, make a check disk and a file system check. But the problem still there.
  Need your help please!
  Thank you

  Please provide a copy of your system information file. Type system information in the search box above the Start button and press ENTER. Select file, Export and give the file a name noting where it is located. Please download your disk from sky to share with everyone and post a link here.

  Please download and share with all copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events (the file default evtx type) and give a name to the file. Do the same for the application log. Don't provide filtered files.

  Help with Sky Drive see section 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• can connect is more

  I am currently unable to connect to my website with dreamweaver or my browser. We have three computers and none of them can connect even if the site is running. There is no firewall or proxy servers is blocking access. This has happened once before, and after a few days, I was able to connect with dreamweaver and browser again. Any ideas? My host server guys say that the problem is not on their end.

  Good luck!

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "derfie" wrote in message
  News:er7q34$qkk$1@forums. Macromedia.com...
  > Hi Murray, thanks for responding. Fixed the problem somehow herself, but
  > since
  > It happened twice, I still want to go to the bottom of it. I brought my
  > laptop computer to another location and used the connection to internet of someone else. I have
  > was
  > able to connect to my host via dreamweaver, so the problem seems to be
  > to
  > House, not in the software. When I came home and reconnected to the laptop
  > with my
  > Access DSL, I could access my site and dreamweaver connected
  > fine.
  > Even for my other computer. I spoke with my internet provider who advised
  > me
  > to clear my cache using the terminal utility.
  >

• How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when the iPhone is connected?

  How can I change the PC than the 6s iPhone more synchronizes to, both wireless and when plugged in? I recently upgraded my PC. I have restored my backup of iTunes on the new computer and it works fine. The iPhone, however, is waiting to synchronize wirelessly to the PC that I no longer use, and iTunes does not recognize my iPhone when I plug.

  I came across this problem recently and had to talk to Apple

  If you mean the computer name listed in the settings - iTunes WiFi - Sync

  Then, it's exactly what I'm talking about

  I had to not reset my - no joke - general - reset - Reset all settings - no content has been damaged and there is NO need for a restore

  Lost among others

  All my WiFi passwords

  All of my alarms

  All my preferences of location services

  BUT he did remove the old name of the computer from there