I can connect to the local network, but not to the internet
Why in an internet connection, I can connect to the Local network, but not to the Internet.
I have valid IP address and configuration is good.
I recommend you read some threads here in the forum about similar issues.
If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
Using the WiFi network, you must check if the common WLan parameters are favourable;
Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.
Good bye
Tags: Toshiba
Similar Questions
-
I can connect to my home network, but all the other networks do not work... Error window says:
Windows could not connect to the (X)? network name?
[Link] Solve problems
[Link] Learn more about Internet connection problems
I gave security, uninstalled reinstalled wireless - uninstall security firewall reinstall and not go...
Windows 7
Hello
- What network are you trying to connect to?
- You are not able to connect to the Internet?
- Are you able to connect to the other network with wired network?
Try the methods provided and check.Method 1:
Check out the link and follow the steps.
What is network discovery?
http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discoveryMethod 2:
Check out the link and run the troubleshooter.
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-WindowsMethod 3:
Reset the TCP/IP and check. Check out the link and follow the steps.
How to reset the Protocol Internet (TCP/IP)
http://support.Microsoft.com/kb/299357Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in WindowsMethod 4:Check out the links and check out them. -
Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!
Hello
Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
Method 2: Troubleshoot wired and wireless in Windows network connection problems
You can also post your question in the forum of Lenovo to get help:
-
I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card. I can't ping the default gateway with the wireless card. When I use a USB network adapter, I can ping the default gateway for the wired connection. I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network. I am trying to run a program to connect wireless to a projector. I have two different programs for the two different projectors. I can connect by cable but not wireless. I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card. I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors. They all have two windows 8 Pro.
I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?
The solution of the problem by chance. I was connected to the computer with a different network than what has been used to authenticate user account on the wireless. When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked. Go figure!
-
Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!
Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!
Hi, Rlayhee,
Printer brand/model?
Start > Control Panel
Select the Printers folder
Right-click on the printer icon, then select open
Are there pending print jobs
If Yes, click on file > cancel all Documents
Close the print queue and the printer folder
Try printing again
Start > right click on computer
Select manage
Select Device Manager
Click on the + sign next to the Ieee... compatible printer (if any)
Right-click on the driver and select uninstall
Click on the + next to imaging devices
Right-click on the driver and select uninstall
Click on the + sign next to printers
Right-click on the driver and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the driver and select uninstall
Close the Device Manager
Restart the computer to Windows to reinstall the drivers
Go to the manufacturer's website and search for driver updates
Try printing again
-
How can I configure VPN to allow someone to see my local network but use their own internet?
OK, I have the VPN all the settings and it works decently, but one thing I really want I can't understand.
When 'Default gateway to use on a remote connection' is checked in the customer then remote users can connect to the vpn, access in the right subnet and to access the internetWhen it is not enabled, users cannot access the computers on the subnet (other than the remote desktop to the vpn Server itself using the local IP address), but they can access the internet through my network.
If it is checked and then access the internet through my network and subnet.What I would like is to be able to have users access the subnet as if they were here, but use their own internet for everything else.
Who is? What Miss me to make it work?OK, I have the VPN all the settings and it works decently, but one thing I really want I can't understand.
When 'Default gateway to use on a remote connection' is checked in the customer then remote users can connect to the vpn, access in the right subnet and to access the internetWhen it is not enabled, users cannot access the computers on the subnet (other than the remote desktop to the vpn Server itself using the local IP address), but they can access the internet through my network.
If it is checked and then access the internet through my network and subnet.What I would like is to be able to have users access the subnet as if they were here, but use their own internet for everything else.
Who is? What Miss me to make it work?Hi, Talkingscientist,
Try this
Linksys
-
I can connect to ad hoc networks, but cannot navigate
I have a compaq laptop with VISTA home SP2 original base. I have can create and connect to ad hoc networks but once established connection, other computers on the network do not appear on my network card, so I can not navigate on their.
they can see my laptop on their network, but they can't sail too not my camera. It is shown as "inaccessible" on their network
I activated files and printers, sharing, file sharing and all the options.
XP and 7 do not have this problem, vista laptop to have this problem
Please help, I'm frustrated
Thanks in advance
Hello santu
The link below has a multitude of steps that you can use to try to resolve this problem. I hope this helps.
http://forums.techguy.org/networking/925138-solved-ad-hoc-network-CMPTR.html
-
I can connect to the internet, but cannot stay connected to thn over 10 to 15 minutes.
After I changed my MiFi for a Verizon 890 L 4 G LTE Verizon internet access I can access the internet for about 10 to 15 minutes. He stops abruptly, but when looking at the network and sharing Center to watch I am always connected. When I run the troubleshooting it says that there is no problem. When I look in the detail section of the troubleshooting it is said that there may be a problem, but there is no additional information available. The thing really strange is that my wife and I have exactly the same computers and the OS and his computer has no problem to stay connected. I found a update for my card driver and it made no difference. I am at a loss now other solutions. I also put the hotspot in WPS mode hoping it would reconfigure the communication between it and my laptop, it made no difference. Help please.
Hi kodibear333.
Thanks for posting your query in Microsoft Community.I understand from your description, that you have a problem with connecting to the Internet.Could you please answer the following questions so that I can help you better.
1. don't you get an error message when you are disconnected from the internet?
2 have you made changes on the computer before this problem?
I want you to try the following methods to resolve the problem.Method 1: Network connectivity problems
Check out the link and follow the steps in the link.
http://support.Microsoft.com/kb/936211#appliesToMethod 2: Wi - Fi and network problems.See the link and the steps mentioned in the link.
http://windows.microsoft.com/en-US/windows/network-connection-problem-help#network-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1.Get back to us and let me know the status of the question so that I can fix it as soon as possible. -
I can connect to the Internet, but shortly after, I can't do anything online.
IM using a zone reactive Verizon MIFI to connect to internet. After having connected and go to a few pages, my computer says im always connected however, I can not anywhere. I get the message that this page cannot be displayed. When I turn the exact box even the provider of my mother on it works great every time. IM in a 3G area, so I wonder if it has something to do with my settings on the computer. IM using a Toshiba laptop equipped with Windows 7.
Hi Mandy_Kirk,
· Did you do changes on the computer before the show?
· What web browser do you use?
· The problem occurs with any particular Web site?
Follow these methods.
Method 1: Temporarily disable the security software .
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2: Follow these steps:
Step 1: Start the computer in safe mode with network and check if the problem persists.
Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.
Method 3: Follow the steps in the article.
Why can't I connect to the Internet?
If you are using Internet Explorer, follow the steps in the article.
"Internet Explorer cannot display the webpage" error in Internet Explorer
For reference: Wired and wireless in Windows network connection problems
-
Just bought new HP with Windows 8 desktop computer, and it connects to the internet through a wired connection. However, sometimes when you try to connect, the message "you are not connected to a network rises, then it usually connects." This message also may appear when trying to back up a new web page.
Disabled the antivrus, no change. Plugged a laptop using the same modem and connections with no problems at all, so there seems to be something specific with this new desktop computer.
Any suggestions on how to stop this sporadic message appear?
Hello Andrea,
A large number of variables are involved when you connect to a network: cables, drivers, network adapters and routers. Some common problems are:
A switch to wireless network adapter is disabled
Airplane mode is on
Poorly connected or disconnected cables
Wireless standards do not match
Missing updates
Incorrect network connection settings
Damaged or incompatible drivers
Hardware or software problems
Perform the steps from the link below and see if the error Stops appearing.
http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-a-network
Answer please if you have any questions.
-
Help! I can connect to my neighbors WiFi but not my own!
I hope that someone can help you. I can connect to my neighbors WiFi without problem, but my own internet connection does not work correctly. If I reboot the modem/router I can connect for about 10 minutes, then he said: "no internet connection" & I get the yellow triangle with the '!' in it... If I open the network and sharing Center and 'Diagnostic' advise me my "Local network doesn't have a valid IP configuration". It does when I use a wired connection and a Wi - Fi connection. Yet if I connect to my neighbors WiFi I have no problem at all.
I don't know what to do!
Hi Katy,.Follow step 1 in this guide: http://www.selectrealsecurity.com/fix-internet-connectionIf you have any questions, just ask. Let me know if this helps you.Brian -
My office will connect to other wireless networks but not my own.
original title: the internet disordereverything in my house is my internet running at home, but for some reason, my desktop connects to the internet outside but not my internet has the House that I don't know what to do?
Hello
I suggest to refer to this link and follow the instructions in the link below and check, if this can help:
http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03
It will be useful.
-
When I am connected to the computer, and I 'switch user' other user accounts, cannot connect to the internet, unless I have complelty "log off." How can I fix? I should be able to stay connected with the windows open, so I can continue when I get back.
I should be able to stay connected with the windows open, so I can continue when I get back.
It depends on your network, there'S no connection. For example, it could certainly happen to a user who was logged only under that user. However, in this case instead of completely disconnected the first account you could probably have the first account log out and hang up the connection. Then the second account probably could dial and connect. FWIW, I think a DSL PPPoE user might see similar symptoms.
Robert Aldwinckle
--- -
Hello
I've recently updated to Windows Vista 64-bit for Windows 7 64 bit. After the upgrade, I noticed that Firefox is the only program that allows me to connect to the internet and surf the web. Windows updates not connecting not (error 80072EFD) and any other program that tries to connect to the internet fails. Also, when I install the updates to Firefox, Firefox is no longer will connect; I have to do a system restore to an hour before the updates of Firefox in order to get online. I searched the web relentlessly trying to identify the problem and tried the steps recommended on these sites: http://www.online-tech-tips.com/windows-7/windows-7-cannot-connect-to-internet/ and http://social.technet.microsoft.com/Forums/en/itprovistaie/thread/8777663d-013c-47b8-b11a-0e890612b533 and http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/32593406-f0af-449d-9cfd-3be3827fbf30
Help, please!
Start with http://windows.microsoft.com/en-US/Windows7/why-can-t-i-connect-to-the-internet
You may encounter temporary connection [e.g. 0x80072EFD] errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941For better assistance, post in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I used the Windows 8 Pro Upgrade on a Windoxs XP pro installation. Everything works except that the network and sharing Center indicates that the computer is not connected to a network, but it is. I can files in front on other computers on the network (at home) and I can access the internet. The active profile is public, although it should be private. I created this to access the homegroup during installation.
I'm trying to get a first HD Homerun operation and if Media Center does not have any network, he sees no tuner either.
What can I do to get this working properly.
a. no red X
1. I tried to download a different driver, but it didn't work at all so cancelled. To check if it was a pilot, I bought a usb wireless adapter. I've disabled the ethernet connection and used the wireless connection. The results are the same regardless of which connection I use.
2. ran every convenience store without success
3. services were what they were supposed to be
4 safe mode is worse. No network connection (cannot see other computers in all), although internet is accessible
5 start gives the same results. "You are not connected to a network" yet the computers on the network are visible and accessible top records. Internet is available.
I installed the software very little on this computer (just installed Win 8 last week.)
The only installed software is software HP Officejet L7680, Brother HL5250DN & first Silicon Dust HD Homerun software driver. I'm trying to set up basically as a DVR, so very little will be on it.
The only thing I can think is that I started with the installation of XP has been implemented using a VPN to connect to our network at work. This means that the computer should be part of the field it. Is it possible victory 8 retrieves these settings and now here's what's causing my problems? (I think that very few came from an installation of XP, but I noticed that some parameters met).
I plan to start again and re-installed Win 8 a last ditch effort... If you can offer any suggestions on repairing this conditioin, please provide me with the best way to re - install Win 8 as a clean install (without the things I installed). I'll then make sure that the network is working correctly before installing anything.
*************************************************************************************************************
A follow-up for this reading. My problem was apparently caused by the upgrade of XP and usinging Dungeon files and SETTINGS. Although there are very limited items brought back an installation of XP, something is buried somewhere off network connections.
To solve this problem, Windows 8 has a new feature called reset. This essentially Setup all over again if you choose the option to delete files. You must enter the product key again when you do this. This is a clean install. I had to update the graphics card drivers, add Media Center back, install HD Homerun Prime, run the Advisor of cable, making the TV configuration and finally got it works as I had expected.
Maybe you are looking for
-
xyzxyzxyzxyz
-
I lost the Panel at the top of the screen - I can not easily close Firefox
A few days ago, I was using Firefox. Somehow I must have clicked on something and now Firefox fills the entire screen and I lost the Panel Ubuntu above where I used to have buttons to minimize, etc. close.
-
Send and receive data packets on the network
Hi all. Let's say I have a GPRS Modem that sends a data packet to an IP address of a server. How can I receive and read the packet data using Labview? In other words, how can I send a packet of data to the server using Labview? Thank you.
-
OK my programs seem to have understood copied and pirated my light money seems to be the entry door
How can I remove silverlight without having to do a full scan is a stripper
-
LaserJet P20115dn will not duplex in windows 7
I recently changed computers from Windows XP to Windows 7. The installation for the p2015dn disc was only for Windows Vista and download the drivers. I could could not find drivers for PCL6 P2015 and only manual duplex options. I REALLY need the du