I can deploy from a folder AND a workspace in TestStand

Similar Questions

• Impossible to create a documents can only create a folder and must have permission from the administrator

  Hey everyone, I have windows 7 32-bit and, recently, I realized that I can't create all documents (word, note, etc.) on my desk... in fact when I right click on the desktop, the only thing that I can create is a folder, and which must permition of Directors... it shows not even all the other options... permition is also necessary when I am tryin to copy files to another folder (songs of ") Download "in a folder on the desktop)... all these commands seem to work in the documents and records of downloads, but when I'm doing something on the desktop is not... any suggestions?

  so I checked all third-party programs, including antivirus, I moved all my data to my libraries, and I can't send them on the desktop as shortcut, since it puts me a message saying that I don't have enough space to do... I think there is there a virus problem and I'll go through format as soon as possible... Thanks for your help anyway mate! I'm going to bother you again if I have a problem: P

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Can we copy the folder and the name of the data file from Windows Explorer and paste as text in Word or Excel?

  I have two records with a similar file; some of them are duplicates, and some may have the same name, but contain different data.

  I would like to compare files from both folders by name and size of the file.  In this way, I could say if I duplicate files, or files with the same name with different data.

  I would copy and paste this information (as text or values) in Word or Excel.  Any way to do it?  Any other suggestions re: comparing these files?

  Just take the b out of my order and you will get info from size.

• Can deploy us the BPM and Webcenter on the same weblogic domain?

  Hello
  
  We have a clustered environment with two managed servers configured for SOA.
  Now, we are looking to integrate BPM webcenter Portal app custom lists. In this process, we can create and deploy a custom on the same servers SOA webcenter Portal app? Help, please.
  
  Thank you
  Suren.
  
  Published by: Suren on 8 may 2012 09:25

  There is something called space process which is BPM into spaces Webcenter which can be installed on the same domain

  http://andrejusb.blogspot.in/2011/02/BPM-Portal-11g-PS3-how-to-configure.html

  Like yours is a custom portal WC I would suggested using separate for ADF and SOA managed servers to balance the load and to separate the concerns...

• How to drag an image from a folder and drop it in Photoshop, InDesign using the keyboard?

  Hello!
  Others may feel stupid on this issue, but the reality is that I drag - move several images in InDesign to a record of every one. Is it possible to drag and drop images of office (folder) of Adobe InDesign, Photoshop, etc.?

  Thank you!
  Hope for a positive response.

  On my keypad, ins & del ar on the 0 and. respectively of keys. Were those on the list of supported keys? have you tried to use the dedicated instead keys?

• can print from the eprint and computer. cannot print from gmail?

  Just bought the HP OJPro 8600. Impressions of the computer of the ePrint, but using google gmail, I can't print to this printer. He goes to the old printer in another room. My computer has the new printer set as the default printer.

  Anyone has ANY idea where the bozo in google to put their information on the printer for gmail.

  Thanks for any help

  Hello Ricktus310,

  Welcome to the Forums of HP consumer printer.

  You have an account Google Cloud Print your old printer connected to?

• How can I restore my tabs and groups of tabs after a update to version 36.0?

  I work with many tabs when I use Firefox. I keep classified in groups of tabs, which helps to separate the different children to work I do and interests I have. I have been using this environment for years. When I started my job today, Firefox updated to v36.0, and noted the following behaviors:

  1. There is only one group of tabs when you try to display tabs at Panorama, as opposed to a dozen groups;

  2. normally if the hidden tabs (tabs in the same group as the startup group, and not the default page) downloading of content to what the user clicks on, icon, if any, and the name of the page will show on the tab currently, the tabs display 'New tab' and no icon. It seems, however, the number of tabs that exist across all groups of tabs, but are now ghosts this default value, a group of tabs. I must add, however, I do not count the number of tabs, so I can't be exactly. When you click on it, there is just a blank page. It is so strange that Firefox knows they are there but cannot simply attach the address.

  I tried to restore the following files from my backup of Windows Home Server to the folder AppData\Roaming\Mozilla\Firefox\Profiles\ .default < gobbletygook >:

  1. in the sessionstore-backups folder, I replaced the files previous.js, recovery.bak and recovery.js (not all of the upgrade ~) with the files yesterday and the day before yesterday.

  When that did nothing, I replaced

  2 sessionCheckpoints.json

  I do not see any file with a recent date that seems to be the one that I have to restore. I should add that I don't see hidden files. I thought about the restoration of the whole of the batch, but didn't know how it would affect the program v36.0 and the profile on 35.0.1 files.

  I have deadlines this week and must immediately restore my environment in order to make these possible. I have no address list on my Web pages to work in IE or other. Any help would be much appreciated.

  On a second note, I had been wondering recently if this tab group environment is an appropriate way to maintain my work environment. Sometimes, during the opening of Panorama, I would get an error saying a script takes too much time, but if I clicked on continue, it would display the groups in a few seconds. I considered bringing it in bookmarks, but it would be tedious and more difficult to access and open several tabs. Initially, I tried tabs groups thinking it was just a matter of maintaining a table of addresses (in tabs) with a name or an ID of tab group. How that might go wrong? Well, there, so it is obviously more complicated than that, and I did not know that upgrades would affect the data of a personal nature. That I should abandon the use of tab groups?

  With the help of information from the user, ptressel, in a post here on the existence of sessionstore.js when version 33 was released, I could easily get my tabs and groups of tabs as follows:

  1. close Firefox and, perhaps, wait a few seconds (30 years?) for any final closing of files;
  2. Check if you have a sessionstore.js file in your profile folder, named as I documented in my original post above.
  3. If this is not timestamped before the discovery of your problem, open the sessionstore-backups folder.
  4. Check if the recovery.js file is properly stamped and, if not, the recovery.bak.
  5. At this point, you are likely to find that none of them is before your problem occurring. If so, open your backups from this folder and go through steps 2 to 4 to find a file before your problem occurring.
  6. When you find a file, copy it to the root of your current profile folder and name it, "sessionstore.js.
  7. Open Firefox. Mine opened upwards as you wish.

  It is a solution for Windows. Sorry I can't comment on other platforms, but I'd bet it's just a copy of file and change of name, it is likely even.

  For Windows users, you can find you must sign out and sign in as administrator in order to access backups. You must not logoff your standard account, but do have Firefox closed as described above.

  Hope that helps.

• I need to remove a folder and I don't have permission to.

  I can't delete a folder and I'm the owner and he said that I have complete control over it. I want to be like it was when I had xp my user account. I want to have automaticly permition to do most things. How can I get permition on all folders?

  Hi Duckycrayfish,

  The folder in which you are trying to delete?
  Was there error message arrived to the top when you try to delete it? If so, what is it?
  In some cases, you might be the owner of the record high level, but in the sub-sub-sub-folders/files, authorization is not inherit to sub-sub-sub-folders/files, so it may not allow you to delete the entire folder.  Don't forget to check the box for allow permissions inheritance for subfolders and files.

  

  Let us know if you have any other questions,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I move all messages and folders in 'Local folder' in the folder of my main account? The local stuff is to import from Outlook

  I imported my mail from Outlook, and they went into a local folders. I want that they in the main folder for the my account section. How can I move them there?
  For the moment, I create each folder and then copy the contents of one folder to another - crazy, and I have dozens of files

  DOH!

  After spending most of last night slowly moving the files from the Local level to the account that it's a little late for me to go back the other way, but what you suggested looks like it could work.
  Still seems simpler to 'right click' a folder and "move it" and all subfolders to have it move properly as well. Of course your test produces a different result for me. I wasn't able to drag all the folders with the sub folders and the contents of these subfolders go with it, only the contents of the main folder is gone.
  Still, as I said, I have now done most probably time call it a day on this topic and I hope that all similar problems see your answer above - cheers.

• Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...

  Lightroom displays all images from a folder - it displays the message '45 65 images, selected 45' and 45 messages do not appear in the grid of the library, but I can't see the remaining images of 20. All filters are disabled...

  Hello

  Please go to the library Module, then click on the picture in the Menu bar and then click the stacking.

  From there please select expand all stack them.

  It should show all the images if they are virtual copies.

  Kind regards

  Tanuj

• When I include photos from a folder in the Photos app in the dock, and I have created an album for them, their changes. It is important for me to keep them in the same order that they were in the file. (It's a numerical order). Any solution?

  Recently, I switched from PC to Mac, and I transferred all my files photo. Now I am their integration in the Photos app in the dock (by dragging the file etc). But when I include photos from a folder in the Photos app in the dock, and then create an album for them, their order in the album change of what it is in the file. It is important for me to keep them in the same order that they were in the file. (In the file it is in numerical order). Any solution?

  You can drag and drop to any order in your albums.

• Can I get the contacts and email from an old record without using the Migration Wizard?

  Can I recover Contacts and messaging of an old record without using the Migration Wizard? Disc of the user in question has been very corrupted with several programs having a weird behavior. Migration wizard migrated corrupt files, so, even a clean install with only migrated users gave rise to an unusable installation.

  I have now all own installed now, but need old email files and contacts. How can I transfer this information a copy of the old/bad drive and only this info?

  Yes. With the old drive mounted and available, open Mail and choose import mailboxes... from the file menu of mail. In the dialog box import data from , choose Apple Mail.

  Navigate to the Mail folder to the user of the old library drive. According to the version of courier used, you might see folders named V2 and / or V3. Choose the applicable folder, and then click Choose.

• I have archived emails from a local folder and now they are missing

  I had maybe 100-200 emails in a local folder. I've archived them with the menu. TB flashed a message that they were in the folder "2014". That's nice. Now, where fires is folder 2014? It is not found.

  The help documents say all configure the folder location of archives on the "Copies & folders" section of the page 'account & Settings '. But "Copies & folders" does not exist for local folders. So, where the hell are my emails?

  Technically, TB did not lose messages. He has just scattered to the four winds, where they would never be found.

  He brought back the out of local folders, accounts of mail box from whence they came. There, they were archived per year in different folders.

  I managed to restore them in local folders from a backup. Either way, this procedure was not without White knuckles because I had added a subfolder from the backup, and TB just went crazy mad.

  This isn't for the faint of heart. I can attest that things can go very wrong. Don't forget to save the profile before trying it and makes no changes to the profile while tuberculosis is open.

• For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left. Tried to 'fix this folder' and lost ALL

  For the second time in two months, all my messages in the Inbox are not there. Only the SUBJECT and the FROM is left.

  Tried to 'fix this folder' and ALL - lost ALL the Inbox.

  The file is still there and works well...

  How can I stop it and what are the causes?

  Thank you all, Gabe

  If you have the file somewhere on your hard drive, export and import tools it will be important back to Thunderbird.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

  Instructions http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html