I can not burn any DVD or CD - burning interruptions of processes before the end

Hello world!
Sorry for my bad English, but I guess you're all updated on the Jesus are not very good in English.
I have the following problem: I can't burn a cd or dvd. I already tried with different programs such as Sonic, Nero 7.0, I Tunes and every time I have an error that interrupts the burning process before the end.
So I don't know what to update! I already tried to re install the drivers, but it's didtn can't change anything.
To help you, I saved a nero error log. I hope it could be useful to someone who could help me!
Here is the log:
me

5 82001080000000000666822849

Windows XP 5.1
IA32
WinAspi: -.
Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.0.0.0
Recorder: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
Adapter driver: HA 1
Drive buffer: 2048kB
Bus type: default (0)-> ATAPI, detected:?
CD-ROM: Version: 1.60 - HA 1 YOUR 0 - 7.0.0.0
Adapter driver: HA 1

= Scsi-device-map =.
DiskPeripheral: FUJITSU MHV2100BH PL atapi Port 0 ID 0 DMA: on
CdRomPeripheral: MAST * A DVD-RAM UJ - 841S atapi Port 1 ID 0 DMA: on
CdRomPeripheral: COACH CD/DVD-ROM 2. 1B axvodka Port 2 ID 0 DMA: Off

= CDRom-Device-map =.
CARPET * a DVD-RAM UJ - 841 S D: CDRom0
COACH CD/DVD-ROM F: CDRom1
=======================

AutoRun: 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) bytes
ShowDrvBufStat: 0
BUFE: 0
Physical memory: 2045 MB (2095084kB)
Free physical memory: 1277 MB (1308144 KB)
Memory used: 37%
QUERIES PFiles: 0x0
Use consultation: 1
Global Bus type: default (0)
Control supported media: disabled (0)

21.9.2006
CD-ROM (ISO)
21:04:46 #1 text 0 file Isodoc.cpp, line 6410
ISO document burn settings
------------------------------------------
Determine maximum speed: FALSE
Simulate: TRUE
Write: TRUE
Finalize the CD: FAKE
Multisession: TRUE
Multisession type: Start multisession
Burning mode: TAO
Mode : 1
ISO level: 1 (Max. of 11 = 8 + 3 char)
Character set: ISO 9660
Joliet: TRUE
Allow pathdepth more than 8 directories: TRUE
Allow more than 255 characters in path: TRUE
Write ISO9660; 1 file extensions: TRUE

21:04:47 #2 text 0 file Burncd.cpp, line 3007
CARPET * A DVD-RAM UJ - 841S
SmoothLink activated

21:04:47 #3 text 0 file ThreadedTransfer.cpp, line 525
ReadBuffer-Pipe got 81920KB of memory

21:04:47 #4 text 0 file Reader.cpp, line 124
Player running

21:04:47 #5 text 0 file Writer.cpp, line 113
Writer D: MAST * A DVD-RAM UJ - 841S race

21:04:47 #6 ISO9660GEN-11 file Geniso.cpp, line 3304
First address writeable = 0 (0x00000000)

21:04:47 #7 text 0 file Burncd.cpp, line 3301
Turn on Track-At-Once, using CD-R/RW media

21:04:48 #8 Text 0 File DlgWaitCD.cpp, line 277
Last possible write address on media: 359844 (79:59.69)
Last address to be written: 318786 (70:52.36)

21:04:48 #9 Text 0 File DlgWaitCD.cpp, line 289
Write in overburning mode: No. (enabled: CD)

21:04:48 #10 Text 0 File DlgWaitCD.cpp, line 2568
Recorder: MAST * a DVD-RAM UJ - 841S

21:04:48 #11 Text 0 File DlgWaitCD.cpp, line 456
> Protocol of DlgWaitCD activities:
=========================================

21:04:48 #12 text 0 file ThreadedTransferInterface.cpp, line 846
CIS (after recorder preparation)
0: TRM_DATA_MODE1)
2 indices, index0 (150) not provided
#0 + 318787 (318787) original disc POS = #318787 / 70:50.37
relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318785 blocks [D: MAST * a DVD-RAM UJ - 841S]
--------------------------------------------------------------

21:04:48 #13 text 0 file ThreadedTransferInterface.cpp, line 1058
Prepare recorder [D: MAST * a DVD-RAM UJ - 841S] for write in TAO
DAO infos:
==========
MCN:
TOCType: 0x00; Closed disc, session not obsessed
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 653182976, ISRC ""
Introduction DAO:
===========
__Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
-150 | Lead-in | 0 | 0x41. 0x00
-150 | 1. 0 | 0x41. 0x00
0 | 1. 1. 0x41. 0x00
318787 | Lead-out | 1. 0x41. 0x00

21:04:48 #14 text file ThreadedTransferInterface.cpp 0, line 1126
Removed 2 blocks from end of track 1. Length: 318787-> 318785.

21:04:48 #15 text 0 file SCSIPassThrough.cpp, line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21:04:48 #16 phase 24 file dlgbrnst.cpp, line 1724
Caching of files started

21:04:49 #17 text 0 file Burncd.cpp, line 4129
Cache writing successful.

21:04:49 #18 phase 25 file dlgbrnst.cpp, line 1724
Caching of files completed

21:04:49 #19 phase 32 file dlgbrnst.cpp, line 1724
Simulation started at 24 x (3 600 KB/s)

21:04:49 #20 text 0 file ThreadedTransferInterface.cpp, line 2669
Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

21:04:49 #21 text 0 file MMC.cpp, line 21541
Set BUFE: SmoothLink-> ON

21:10:08 #22 text 0 file ThreadedTransfer.cpp, line 228
all writers idle, stopping conversion

21:10:10 #23 phase 33 file dlgbrnst.cpp, line 1724
Simulation completed at 24 x (3 600 KB/s)

21:10:11 #24 phase 36 file dlgbrnst.cpp, line 1724
Burn process started at 24 x (3 600 KB/s)

21:10:11 #25 text 0 file ThreadedTransferInterface.cpp, line 2669
Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

21:10:11 #26 text 0 file MMC.cpp, line 21541
Set BUFE: SmoothLink-> ON

21:12:16 #27 SPTI-1040 file SCSIPassThrough.cpp, line 306
CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
Key: 0x03 (KEY_MEDIUM_ERROR)
Printing Code: 0x10
Meaning of Qual: 0x00
The CDB data: 0x2A 00 00 01 76 00 00 20 00 00 00 C0
Sense area: 0xF1 00 03 00 01 74 5 0 a 00 13 00 00 10
Buffer x 03390000: Len x 10000
0 X 72 F1 E5 87 D3 3D 4A 96 F9 B0 73 83 14 72 A1 D3
0XF3 49 6 93 44 25 04 6 E5 THIS 44 5F 3RD 79 47 C6
DD EE 0XDD 3A FD 4 71 D CB F3 4B 18 BD 7 D DF 35 32

21:12:16 #28 COR-1040 file Writer.cpp, line 302
Illegal block order size
D: MAST * A DVD-RAM UJ - 841S

21:12:16 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:12:17 #30 text 0 file ThreadedTransfer.cpp, line 222
conversion idle, stopping reader

21:12:17 #31 CDR - 201 file WriterStatus.cpp, line 200
Invalid write state
D: MAST * A DVD-RAM UJ - 841S

21:12:17 #32 TRANSFER file-18 WriterStatus.cpp, line 200
Could not perform PlageFin

21:12:17 #33 text 0 file MMC.cpp, line 16273
start closing a Session

21:12:30 #34 SPTI-1040 file SCSIPassThrough.cpp, line 306
CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1040)
Key: 0x03 (KEY_MEDIUM_ERROR)
Printing Code: 0x10
Meaning of Qual: 0x00
CDB data: 0 x 00 00 00 00 00 00 00 00 00 00 00 00
Sense area: 0 x 71 00 03 00 00 00 00 0 to 00 13 00 00 10

21:12:30 #35 COR-1040 file WriterStatus.cpp, line 249
Illegal block order size
D: MAST * A DVD-RAM UJ - 841S

21:12:30 #36 TRANSFER file-19 WriterStatus.cpp, line 249
Could not perform fixation

21:12:30 #37 text 0 file WriterStatus.cpp, line 258
falling back to disc fixation

21:12:30 #38 text 0 file MMC.cpp, line 16273
start closing a Session

21:12:30 #39 SPTI-1046 file SCSIPassThrough.cpp, line 306
CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1046)
Key: 0x05 (KEY_ILLEGAL_REQUEST)
Printing Code: 0 x 30
Meaning of Qual: 0x05
The CDB data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense area: 0 x 70 00 05 00 00 00 00 00 00 30 05 AA a 0, 00

21:12:30 WriterStatus.cpp - 1046 file CDR #40, line 249
Illegal disc
D: MAST * A DVD-RAM UJ - 841S

21:12:30 #41 TRANSFER file-19 WriterStatus.cpp, line 249
Could not perform fixation

21:12:30 #42 phase 38 file dlgbrnst.cpp, line 1724
Burn process failed at 24 x (3 600 KB/s)

Existing drivers:
File ' Drivers\PXHELP20. SYS: Ver = 2.03.32a, size = 20640 bytes, created 25/04/2005 11:03 (Prassi/Veritas driver for win 2 K)

Registry keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

So, thank you!
Next time!
Roman

Hello

The error log doesn't provide very useful information.
According to this error log, the simulation was running OK, but the burning process has not been started.
In such cases, it is very difficult to say why it happens. Maybe the drive is damage and cannot calibrate the lens correctly or using media is not compatible.
Burning the process depands on the fields and the data that prefer to burn.
Data, CD, DVDs are encrypted and it s is not possible to burn and copy it.
In other cases, you can also try to burn media with low speed and not with 24 x.

But to sentence case you the reader has a malfunction and you need to replace ;(

Tags: Toshiba

Similar Questions

  • I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

    I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

    Hello golden2,.

    I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

    Please, try the procedure described in this article using the disc is ejected.

    Get help with the SuperDrive slot on your Mac - Apple Support loading

    Do not eject discs or discs eject slowly

    1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
    2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
    3. If the disc does not eject, try dragging the icon of the disk to the trash.
    4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
    5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
    6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

    Take care.

  • Windows Search can not find any file with 'two letters'-'two letters', followed by the numbers i.e. FS-XP1234

    It's a weird thing, these files are located on a network drive, but I also tested in a local folder with the same results.

    Examples of questions:
    Folder containing the following files
    FS - XP12345.pdf
    FS - XP54321.txt
    124234Sample12.PDF
    If I where to look for "FS - XP" I'd get both the FS - XP * files as results, but as soon as I add a number to search (only using the letters), for example FS - XP5 I get nothing.
    Any other combination works and files that begin with the letters or numbers I can get the name of the entire file and it works.
    Only when it has 'two letters'-'two letters' followed by a number do get no results when you search for the name of the entire file.
    I hope that makes sense.
    Thank you
    Clark

    The problematic bit is actually the hyphen, although oddly, there is no block research in all situations.  The general Council is when the search text contains a symbol such as the hyphen, place the text between quotes and place ~ = before the quoted text.  So ~ = "fs - xp5" would work, but unfortunately this special syntax does not work in areas indexed without specifying the filename property.  To limit the search to the file names and also to allow the search successfully indexed areas, enter name: ~ = "fs - xp5.

    Some symbols have actually not need quotes, but some do so they are generally advised.

  • can not see any type of files, except that ICons.What of the software is the problem

    Now, I'm having this problem recently & is permanent, all file types are projected as empty case type instead of their respective icons. All installed software are shown with their respective icons. don't know how to solve this problem.

    Hello

    If I understand correctly you are facing the problem with all the icons on your Windows XP computer display even. I would like to know more information on the issue, so that we can help you better.

    1A the question started recently?

    2. do you get any error code or error message?

    3. have you made changes on the computer before this problem?

    4. which icon (third party software) programs are you referring? (Mention the name of the program)

    Let us try the following methods and check if it works for you.

    Method 1:

    Start in safe mode and check if the problem persists. Is the question do not persist in safe mode then put the computer in a clean boot state and check if there is no third party software/application causes this issue.

    Step 1: Start Windows XP in safe mode.

    A description of the start in Windows XP Mode options:

    http://support.Microsoft.com/kb/315222

    Step 2: How to configure Windows XP to start in a "clean boot" State:

    http://support.Microsoft.com/kb/310353

    Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

    Method 2:

    Run Microsoft Safety Scanner and check if there is any threat of viruses.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

    Method 3:

    If the problem started recently, then restore to a point when the computer was working fine.

    How to restore Windows XP to a previous state:

    http://support.Microsoft.com/kb/306084

    WARNING: System Restore does not affect personal files, such as e-mail messages, documents or photos. You can only restore files that you have deleted if you have made backups of these files.

    Please reply with the status of the issue, so that we can better help you.

  • My laptop can not associate any bluetooth device.

    My laptop can not associate any bluetooth device. Also, when I click on the bluetooth setting tab in the Control Panel, no dialog box appears.

    Hello

    1. do you get an error message?

    2. which Bluetooth device you try to connect?

    Here are some ways you can follow to resolve the problem:

    Method 1:

    Check if the Bluetooth services are enabled. To do this, follow these steps.
    a. click on start
    b. type services.msc and press enter
    c. in the list find Bluetooth support services and double click on it.
    d. make sure that the service is set to automatic and started.

    Method 2:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 3:

    Check out the link and follow the steps in the article:

    Add a Bluetooth device to your computer

    http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

    Method 4:

    Bluetooth devices do not work correctly on a computer that is running Windows

    http://support.Microsoft.com/kb/980396

    See also:

    Connect to Bluetooth and other wireless or network devices

    http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

  • Can not burn the backup of the data on a DVD - RW on the Satellite A100-200

    Hello

    I did a lot of audio and data cd using Nero burning, but can not burn a dvr - rw data backup.

    Advice please.

    Satellite A100-200 and xp home

    What do you mean with data backup?
    And have you tried other DVD discs? I think your drive is compatible with the player so test drive of other manufacturers.

    On the Toshiba laptop I always use verbatim, and I never had any problems with it.

  • can not start any other os that mac os install dvd

    I can not start any version of windows or ubuntu on my mac pro 1.1.

    Tried:

    Windows 98

    Windows 2000 Professional

    Windows 2008 Server

    Windows XP home

    versions of Windows 7 Professional 32 & 64

    Ubuntu 10.04 lts 32-bit

    Ubuntu 14.04 32-bit and 64-bit

    most will show a cd when you hold down the ALT to start up

    and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.

    searching the Internet, it seems many people have this problem.

    Details of my machine:

    Model name: Mac Pro

    Model identifier: MacPro1, 1

    Name of the processor: Dual-Core Intel Xeon

    Processor speed: 3 GHz

    Number of processors: 2

    Total number of Cores: 4

    L2 Cache (per CPU): 4 MB

    Memory: 16 GB

    Bus speed: 1.33 GHz

    Boot ROM version: MP11.005D.B00

    Version of the SCM (System): 1.7f10

    Chipset model: NVIDIA GeForce 7300 GT

    Type: GPU

    Bus: PCIe

    Slot: Slot-1

    The PCIe track width: x 16

    VRAM (Total): 256 MB

    Provider: NVIDIA (0x10de)

    Device ID: 0 x 0393

    Revision ID: 0x00a1

    ROM revision: 3011


    The system version: Mac OS X 10.7.5 (11 G 63)

    Kernel version: Darwin 11.4.2

    Boot volume: OSX

    Boot Mode: Normal

    Ensure the virtual memory: enabled

    64-bit kernel and Extensions: No.

    We window directly on the hardware, you must install via Boot Camp

    http://www.Apple.com/support/Bootcamp/

    a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.

    The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/

    http://Forum.Netkas.org/index.php?topic=1123.90

    Also:

    https://help.Ubuntu.com/community/MacPro

    http://AskUbuntu.com/questions/507354/how-to-install-Ubuntu-14-04-on-my-Mac-Pro-1-1-with-a-raw-hard-drive-by-a-bootabl

  • I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

    Original title: I can not burn CD

    I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

    Hello

    1. have you tried using different CD and check?
    2. were you able to burn CDs without any problem earlier?
    3. have you made changes on the computer before this problem?

    The hotfix in the following article might help you.
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  • DVGW/hd ts-l802a does not see any DVD/CD

    first DVD worked fine, but when I read the second DVD, it's a ticking hard sound.
    end now, he does not see any DVD/CD / audio CD.

    Is there someone who has / have had this same problem or is there someone who can help me with this problem?

    Hello!

    You must give us a little more information such as your laptop model and the OS.

    However, maybe it could be useful for you:
    http://support.Microsoft.com/kb/314060

    You can boot from a CD like Linux boot disk?

    Good bye

  • After update readers, my cdrom can play music but can not burn a cd

    ORIGINAL TITLE: Windows audio

    Hello...

    WELL, AFTER UPDATING READERS, NOW MY CDROM (2 OF THEM) CAN PLAY MUSIC BUT CAN NOT BURN A CD.

    CAN YOU HELP ME?

    Thank you.

    RESPECTFULLY,.

    JOE.

    Hello

    1. what operating system is installed on the computer?

    2. What is the full and exact error message?

    I suggest to see the link and try to run the fix it:

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    If the problem is not resolved, please provide more information to help you best.

  • CyberLink recovery disk utility: can not burn to disc when you try the recovery computer

    Hi all

    Recently, my hard drive on my HP Pavilion p6674y was wiped out. I have a new hard drive installed in the computer. I created my own recovery DVDs when I bought the computer first. I started with the recovery discs and all was well until about 70% (on the 2 CD at this stage of 3) and then I got an error "0xe0ef000e.

    I then did some research and have ordered the discs of recovery from HP and then saw that I must download and burn to disc recovery disks Cyberlink utility so that the discs work. I have serious problems this CD to burn. I followed the instructions and when it is to the burning time of the installation wizard CD does not burn. It says on the wizard I'm full and there is a 'yes' 'no' and the button "Cancel". When I hit Yes the computer I currently use just restarts. I then try the disc (even if I can say that it's always empty) in my Pavilion and the checkmark never comes to the top.

    I'm not sure what I'm doing wrong.

    Help, please.

    Thank you

    Hello:

    This utility is not absolutely necessary.

    You only need if the HP recovery discs do not work on your new hard drive.

    I tried to run the file on Windows 8 and it wrong, then I won't be able to help you with that.

    While you wait for your drives HP recovery plant to arrive, you can make your own plain W7 installation media and use that to install W7, so at least you can use your PC.

    Here is how to do this.  My only review of the instructions is not to activate W7, unless you want to. Just skip entered the product key from the COA Microsoft sticker on your PC case.

    You have 30 days to use the program without activating it.

    Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.  SP1 Refresh of media files are the latest ISO files.

    http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

    Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

    Use the product key of windows 7 of 25 characters to activate your installation.

    http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

    Then go to the support of the PC and driver page to install the drivers you need.

  • Satellite P200 - HD-DVD Player Toshiba can not read HD-DVD

    Hello.

    I have a problem with my Satellite P200-1: can not read HD DVD. There is a message that says that the video may not be in an external device.

    The problem is the same if I try on the screen of the laptop or on the TV (Sony Bravia Full HD) with HDMI. I have the latest driver and software for vista sp1 installed...

    Some have an idea?
    Sorry to talk so badly...

    Published by: ADMIN

    I think I know what's wrong;

    Check this Toshiba TB document;

    [HD DVD title does not play ("unable to output the video to an external device"): http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1664 788xml & sliceId = & dialogid = 41741513 & stateId = 0% 200% 20 41739828]

    To resolve this problem, you will need to update the Audio driver Realtek for Windows Vista.

  • Can not see any of the website features especially icons to link

    Can not see any of the website features especially icons to link

    See:

  • Satellite U840-10N - Windows Installation can not see any drive

    Hi all, this is my first post so I hope that I chose the right place to post in.

    I just bought a new Toshiba Satellite u840-10n ultrabook. He joined WIndows 7 Home Premium 320 GB HHD + SSD of 32 GB.

    Even though I prefer Linux, I need Windows because of Microsoft Visual Studio. I downloaded Visual Studio (legally throught dreamspark.com), but it looks like it has some issues. In particular, I can't create any project.

    After searching the Web for this problem, I decided to try reinstalling Windows, hoping that this will solve the problem, and here's the point.

    Installation process of Windows 7 can not find any drive. I looked through the web a lot to solve this problem, even, without understanding.

    I read a lot of other people had the same problem. I tried different ways and I'm about to throw the laptop out the window.

    Is there anyone can help me?

    See you soon,.

    Marco Galassi

    You need to load the SATA driver before you start the installation of the OS. Try it please use the files from http://www.fileswap.com/dl/igfH0jVrap/

    I used it on my Win8 preinstalled satellite to install Win7 64 bit. Copy it to USB and install from there.
    Please post comments.

  • Satellite A30 - after the BIOS update I can not install any OS

    Hey everybody

    I have a problem with my laptop Toshiba Satellite A30 PSA33E. I update my old BIOS and 1.7 and now I have a problem: I can not install any OS on my PC because it stops whenever I try to install. After 50 tests, I installed a Windows SP2, but my PC turns off always.

    My CPU is at 100% after I launch mozilla so I guess my problem is the BIOS. I try to install v1.8 BIOS and is not working and I get an error (not compatible with the installed BIOS)

    Where can I find the 1.3, 1.4, 1.5 ROM BIOS? Can someone help me please?
    THX

    The latest version of the BIOS should not cause this kind of thing. Have reset you the BIOS to its default settings?

    Have you checked the CPU radiator for an accumulation of dust? A can of compressed Air can help remove dust through the vents.

    What was the reason that you updated the BIOS, in the first place? Had previous problems with the system?

Maybe you are looking for

  • need Photos of iMovie - explanation

    Hi all im hoping someone can explain the behavior of photos in Imovie... I have a Macbook Pro and I created an album on photos called any vacation 1500 of my pictures/videos. My Mac is configured to record the full versions. Ive then went into iMovie

  • Why my iMac stop or stagnate after awhile?

    I have system preferences: energy saver > computer sleep (never) and > display sleep (15 min), but the computer cannot be started after leave in this State for more than half an hour.  When I click on the space bar on my keyboard to open the computer

  • Office Jet Pro 6830: Office Jet Pro 6830 slow scan or fax

    I have been using this printer with mixed success. Initially it would scan and send faxes quickly.  I have a set on my network IP address and is not into a power strip or backup power.  I have the latest drivers, etc.. HP just released. However, give

  • How solve the OptionalComponents cannot be opened. Access is denied. Vista

    How solve the OptionalComponents cannot be opened. Access is denied. For Windows Vista 32 system, some Excel file cannot be opened, impossible to uninstall MS Office.

  • my pc will only of "hibernate" mode on 'on' or 'sleep '.

    Hello all, anyone know why my pc will only of "hibernate" mode on 'on' or 'sleep '? I mean it opens during the night... I have windows vista...