I can not connect to Macbook Pro iCloud

Hello!

I have a problem with access to iCloud on my MBP (15 inch, mid-2015) OS X EL Capitan. I can not connect on App Store to make purchases and get apps, iTunes, Messages and iCloud in system preferences. When I try to open a session, apps just freeze and nothing happens, then I have to force quit. I googled many solutions, but no one has helped me.

You must remove the serial number of your computer from your profile.

Try a reboot.

Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

Isolate a problem by using a different user account

If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

Safe mode - on El Capitan

Start Mode without failure-El Capitan.

Tags: iCloud

Similar Questions

  • Can I connect my MacBook Pro (13-inch 2011) with my Samsung TV with just a crush for a HDMI cable?

    Can I connect my MacBook Pro (13-inch 2011) with my Samsung TV with just a crush for a HDMI cable?

    I mirrored displays in the preferences (and it is optimized for Samsung 1440 x 900)

    But my TV says "Mode not supported" on display...

    Any ideas appreciated...... has soon

    You should be able to.

  • I can't get notes on my macbook pro iCloud

    I chose notes in system preferences-icloud on my imac, iphone and macbook pro, so the notes are in iCloud. I see all the notes on my imac and iphone icloud, but strangely nothing on my macbook pro. I already tried to remove and reinstall the statement in the macbook pro, but it does not help. This problem only occurs not in what concerns the calendar in iCloud, which can be seen on the three elements (iphone, imac, macbook pro).

    What software are you running on all these devices.

  • IPhone s 6 more does not connect to MacBook Pro

    I have a MacBook Pro (retina, 15 inches, mi 2014) 2014, 2.5 GHz Intel Core i7 processor! 6 gb 1600 MHz DDR3,

    Intel Pro Iris 1536 MB OS X EL Capitan. I checked the LMP bluetooth under system reports and the LMP version

    0x6.  I'm trying to pair a 6s iPhone more Version 9.2.1 (13D 15), model MKV92LL/A this phone is brand new.

    When I try to pair the two of them, he said MacBook Pro not supported.

    Also when I turn on my Mac it automatically shows the messages and gives me a code to enter. I go to Messages

    Select text Message Forwarding and enter the number. He'll be right back with another number and starts

    start all over again. When I try to close it, it just continues to do it.  I am connected to iCloud on both devices using the

    same apple ID. I also email and phone numbers boxes checked to receive messages from these two places.

    This is the first time I had all the important issues with my apple devices. I had a small problem connecting my

    my ear buds but Jawbone after a certain time has been able to fix it. I did countless research on this matter and did not

    haven't found a solution.  Please help one of the reasons why I made the switch from apple was integration. I was really looking for

    before you can use the hand off and all the other things that I should be able to do with these 2 devices.

    Thanks Steve cut Frame to finish

    Matching of an iPhone to a Mac is not supported. If you want to move the data, there are some options... Parachuting is a.

    Barry

  • How can I connect my MacBook Pro to my XP based home network?

    PC under XP Pro is the server for the network MSHOME. I'm trying to connect my new MacBook Pro to this network. I changed all the settings at level 5; the Mac can 'see' MSHOME and the server, but the server can not see the Mac; There is therefore no communication between them. When I click on the server since the Mac I get the message "you don't have permission to access...". »

    Is there a solution?

    Hello

    I suggest you post the question in the forums and check them off below if it helps:

    https://discussions.Apple.com/thread

    It will be useful.

  • How can I connect my MacBook Pro at home at my iMac at work?

    I have a laptop MacBook Pro that I use at home. I have an iMac at work. Both can connect to the Internet. How can I connect to the MacBook Pro iMac when I'm at home?

    Here are some ideas

    Away from home? Here's how to do to access your Mac remotely. Macworld

    3 ways free to connect remotely to the desktop of your Mac - how-to - Geek

  • can I connect my macbook pro 2007 to a mac mini in 2015

    I have a 2007 Mac Book Pro which works well, but the hard drive is running out of space.  Can I connect to a mac mini and use it as an external hard drive?

    Faster would be to connect the two via FireWire and start the one you want to use as storage in target disk Mode

    How to use and troubleshoot disk mode target FireWire - Apple Support

    You can also start the computer is the normal mode and the use of fire share (System Preferences > sharing > file sharing)

  • Printer Envy 5530: why I can not connect my Macbook on this new printer? Download HP and Apple and disc. NO.

    My HP Envy 120 died today after only 13 months. Bought the 5530 want to replace. My Macbook running lion 10.7.9 impossible to install the software of Apple, HP or the disc drive. Please someone tell me what to do. It seems crazy that each site recommend one for download. If the download n 't possible that they would be kind enough to give me an error message. life is too short for all that. Have installed ink cartridges, but will be back tomorrow if I can't make it work. Need a printer! Thank you very much for ANY help! Very grateful in advance.

    Hello @Islandedisto,

    Welcome to the Forums of HP Support!

    I would like to help you today with the installation of your new HP ENVY 5530 e-all-in-one printer on your Mac OS X 10.7. There is a chance that the old remains of your HP Envy 120 drivers cause a conflict when you try to install this new printer Envy. Can I please have you follow the steps below to solve these conflicts to occur.

    Step 1: Resetting the printing system:

    To begin, I will have you reset the printing system on your Mac because it is important that we have a pleasure to work with for troubleshooting clean slate. Please click herefor instructions on how to perform the reset. When the website opens, follow the steps under 'Reset the printing system in OS X Lion'. This Reset deletes each printer on your Mac. However, it does not uninstall printers. Therefore, if use you other printers on the Mac, once the reset is complete simply make sure printers are attached via a USB cable or connected network and (+) add hide them in. do not add your HP Envy in at this time.

    Once the reset is complete, proceed to the next step.

    Step 2: Uninstall the drivers and software:

    Please click here to find out how to properly uninstall your printer. Once the site opens, select the drop-down menu 'Mac OS X v10.6, OS X v10.7, OS X v10.8 and OS X v10.9' and follow the steps to complete uninstallation. This should clean up any software and drivers for your old HP Envy 120 institutions.

    Once the uninstall is complete, please continue on.

    Step 3: Check and repair your Mac disk permissions:

    1. Open Macintosh HD and go to Applications
    2. Go to the Utilities folder
    3. Open disk utility
    4. Select the hard disk volume, you use (usually on the left)
    5. Select verify disk permissions
    6. Once this process is complete, select repair disk permissions

    Step 4: Check the Apple updates: 

    1. Go to the Apple
    2. Select System Preferences
    3. Select software update
    4. Click update now
    5. Install your available updates
    6. Computer restart

    Step 5: Install the drivers:

    1. Please click here to download the latest full-function software package and the driver for your printer
    2. Once the site opens click on the download button at the top left
    3. Once the download is complete, follow the steps on the screen to install your new HP Envy

    Once installed successfully, your HP Envy, please try printing and scanning to ensure the full functionality of the product.

    Please reply to this message with the result of your installation. I look forward to hear from you!

  • Can I connect my MacBook Pro (mid-2012) to the TV 4 K w / a 120 Hz refresh rate?

    Hello!

    I plan on buying a new TV (http://www.vizio.com/m43c1.html) and I was hoping to use to connect my MacBookPro mid-2012 as well. I noticed on the forum and just general Google search, that people were discussing if it would work at 30 Hz or 60 hz - but this TV has a 120 Hz refresh rate. My computer works? And if so, what wiring do I need?

    Uh, did you actually READ the tech specs?

    Entries

    • Ports5 HDMI (3 low; 2 side)
    • · Video HDMI Port 1 SpecUHD @30 Hz, taken supported HDCP 2.2
    • · Video HDMI Port 2 SpecUHD @30 Hz, taken supported HDCP 2.2
    • · Video HDMI Port 3 SpecUHD @30 Hz, taken supported HDCP 2.0
    • · Video of SpecUHD 4 Port HDMI @30 Hz, HDCP 2.0 support
    • · Video HDMI Port SpecUHD @60 Hz, taken 5 supported HDCP 2.2
    • Component1 (side)
    • Composite1 (side)
    • Tuner1 (bottom)
    • Ethernet1 (bottom)
    • Ports1 USB (side

    None of those who accept the entrance faster than 60 Hz. The mentioned number of 120 Hz is an internal refresh rate, not the flow of incoming data.

    But it seems that he would eliminate the flicker of the update of 30 Hz.

    --------

    If you can't use the HDMI, I expect you can get 30 Hz with reliability. If play you with him at length and seriously, maybe 50 Hz. If you also get extremely lucky, maybe 60 Hz.

    But 120? Nope!

    The TV can accept and the Mac won't.

  • Can I connect a macbook pro iMac for Logic Pro mirrored

    My main computer is an iMac, running Logic Pro with an external drive for samples and projects in my home "studio". I would like to be able to work on these projects away from the 'studio', in addition to comfort, on my MBP. And then, when the time comes to take my equipment to, say, a recording studio, I could then just take the MBP and external drives, for convenience. What would be the best way to do this?

    If everything is on your external drive, then just eject this drive, unplug it, plug it into your MPB, turn it on, work.

  • Connect a Macbook Pro to a Macbook Pro

    Can I connect my macbook pro 17 "firewire to my new macbook pro 15" love at first sight? I want to put the 17 "in target mode. Any other suggestions. Steve Jobs prayer did not work and Wozniak is not taking my calls.

    Yes.

    (137543)

  • Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

    Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

    Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

  • I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

    I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

    You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

  • My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

    My iphone is disabled. I can't connect to itunes and icloud without my password.  It is not possible to do so while the phone is off.  What should I do?

    The steps here talk about everything that you can do other than take it to an Apple store with proof of purchase.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

    I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

    OS X El Capitan: use your TV as a monitor

Maybe you are looking for