I can not connect windows 7 to an old Canon BJC 250 (have USB to parallel cable. conv)
I have a Canon BJC 250 printer connected to the USB port ieee. Its a printer Workhouse. Never had a paper jam all these years. (1996), I found ink cart. to do this in a thrief store. I can't seem to part with them. His semple to operate and works better than my Dell 725 and the Epson conbo. I would like to know if there is conpatable with Windows 7. I can't install the driver of this OS. If anything can work with other pilots from cannon. Notes; I still have the installation CD. but it will not be installed.
If you go to the website of Canon in the following link, it shows as the latest drivers for XP. In addition, if you click on "Service and support" at this link and then search for "Windows 7", you will find a document that lists the BJC series printers that are supported for Windows 7 and the 250 is not on this list. " Here is the link to Canon: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/bjc_series/bjc_250_series#ServiceAndSupport
I thought that maybe the BJC-240 which is support could be close enough, but based on what follows, where the user asking the question said he tried this driver, apparently we don't: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/canon-bubble-jet-bjc-250-printer/d27af8d2-a770-e011-8dfc-68b599b31bf5
Tags: Windows
Similar Questions
-
SSL - VPN can not connect - Windows 10
Hello
Our office has a SonicWall TZ105, with a more recent firmware, and now with Windows 10, we are unable to connect via SSL - VPN. The user name and password are correct, and I can connect with the Android app. But in Windows 10, I tried the MobileConnect App, the more recent mysonicwall NetExtender, used the terminal to create the VPN connection and just manually made a VPN connection and nothing works.
The President of our company just got a new laptop and there 10 Windows, and I'm hitting a wall in the world, but need to get its connected to our office.
Other VPN connections to other VPN servers work on this laptop, but not at our office. He used to work with the same settings of router on Windows 7.
Each different method of connection attempt is to give a different error. The more strange to me, it's "the specified port is already open." But there is no other connection to that port, and I am still able to connect using my phone.
Any ideas? Thanks in advance!
I was able to solve the problem using the NetExtender 7.0.203, version downloaded from mysonicwall.com. It was the only version (back to 5.0.?) that has been successfully can connect to our TZ105 with a laptop Win10 with all updates.
I hope this helps someone else, I was pretty nearly pulling my hair out...
-
I have Windows 7 on my desktop. One day I might get to www.google.com and the next day I couldn't. I had not made any changes to my computer so I am unable to understand what is happening.
Do a check with some malware malware, analysis of programs on the Windows computer.
You need to scan with all programs, because each program detects a different malicious program.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender: Home Page:
http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
- Malwarebytes' Anti-Malware:
-
I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.
I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.
If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.
-
I can not connect, technical support in India tells me that I have no account. My bank account shows billing information. I was hired with the cat for almost an hour now to continue to say that I have no account. It's so frustrating! Any suggestions?
Hello
You will need to contact support by calling/chat for this request.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
Kind regards
Sheena
-
my password on my windows xp was chanded and now I can not connect
Two days ago, someone changed my administrator password and I can not connect. When I connect as a guest, whenever I try to download it says "program not found". I can't use my MagucJack or any other thing except by email
Hello
This is information from Microsoft for when you forgot your XP password.
"How to connect to your Windows XP-based computer if you forget your password or if your password expires"
http://support.Microsoft.com/kb/321305
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
Other information above, we can not help you more with this.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
See you soon.
-
I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet. The icon shows "acquiring network address". I connected the router directly on laptop computer connected to the wireless network and still unable to connect. I tried to restore the system as well, but the message says "unable to restore the system, no changes were made. Help?
original title: acquisition of network addressHello, Steve.
Try this link below on how to reset IE and let me know if it helps. -
It seems that someone else took the administrator account and he has rights that replace the mines on the computer. Try to reinstall windows xp professional, it tells me nothing, but freezes...
Try to connect to windows on my account, he tells me that my account is disabled.
Try to connect through safe mode that come no user name.
Trying to set up the administrator to log on without password, said that the account has been disabled.I am trying to reinstall the Windows XP Professional with the disc I have, but with this gel, I can't.
I am very discouraged and would like this to be resolved. I'm on another computer write because I can't even connect to the other.
It won't do anything when trying to go to the last good known either.
My copy of Microsoft security essentials would be not updated and I had restarted and can't get back in it is saying I had a Trojan horse and he removed twice, but he was still there. If someone else gets this problem to not restart or you cannot recover.Reinstalling Windows can sometimes be a difficult process and most of the time that it is not even necessary to solve most of the problems.
In case it is necessary to reinstall Windows XP Pro, it is imperative that you back up all your data first. did you?
In addition, if a system is compromised or broken, a clean install should be made. This means that you must configure your motherboard BIOS to boot from the installation CD (instead of the usual default, which is the hard drive). The way to do this varies according to the brand and model of your PC.
Assuming that you have the correct CD for your PC, these instructions should work for you:
http://michaelstevenstech.com/cleanxpinstall.html
http://michaelstevenstech.com/bios_manufacturer.htm
If you want to help more away from us, please answer the following questions:
1. What is the make, model and model number of your PC?
2. assuming you have Windows XP Pro installed on it, what level SP is in?
3. you have the XP Pro corresponding correct for her installation CD? In other words, if you have an OEM version, you must use a CD of the OEM version. Here again, a commercial version should work as long as it is not already in use elsewhere. What level of SP is the disc in?
4. you say that you can not connect to Windows, yet you mention that MSE has given you a message. Please specify.
Finally, once you're convinced that all your important files are backed up and if you want to try the Windows XP system restore (or other methods) before something as drastic as reinstalling Windows, we can give you advice. And then, if damage malware is really bad, it may not be worth it. But if you want to try, let know us.
-
I can not connect with the windows Messenger
I can not connect with the windows Messenger
Hello
In which case it's a server problem, you will get a better response in the Live Messenger forum.
My moderator tools cannot transfer messages on the forums of Windows,
Please re - ask your question on the Forum Windows Live http://windowslivehelp.com/
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Can not connect to Windows Vista, I forgot the admin password
I can not connect in windows, please tell me how to reset an administrator password for windows Vista Home Basic if ever I forgot my password or my password has been expired
I can not connect in windows, please tell me how to reset an administrator password for windows Vista Home Basic if ever I forgot my password or my password has been expired
We cannot help users to bypass the password protection.
Here is the link to the policy forum:
-
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
I can not connect to windows.
I can not connect to windows. I get the message "Windows user profile Service Service failed to load the connection user profile failed" any solution?
You have another admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and select Safe Mode with network.In the window of logon in safe mode...
1.
You can log in to your own account administrator in safe mode?
If so, do a restore system first, if no help, run the Microsoft tutorial support listed below.2. If you cannot connect to your own account, you see another
next to your admin account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a
Date of when you were able to log in NORMAL MODE as your restore point.
How to restore the system:http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
Microsoft technical support
tutorial :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" application -
PhpMyAdmin can not connect to local MySql server on Windows 7
PhpMyAdmin can not connect to local MySql server on Windows 7
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
How to turn off "windows can not connect all readers baloon network?
I have 2 computers. Sometimes, you're on, and the other is off. When I boot windows 7 it says "windows cannot connect all network drives. The ball won't go away until you click on it.
It is simply annoying. I know it can not connect, and I don't need windows to tell me that. I don't want to cancel the reconnect at logon option, because sometimes the other computer is on, and the automatic reconnection is good. I don't want to disable all the balloons - just this one. How can I do this?
PS-winXP did not have this problem.
Hello again Bill,
It is a great idea for a future update. If you wish, you can leave your comments for the Windows team at this link: -
Hello
I just bought a new Dell laptop with window 10. The initial screen is flashing with facial recognition of Dell. I can not connect to the PC.
Please any solution to this problem.
Thank you
Jesus
Thanks, but how DO you start in safe mode? Can you send a link or something? All the videos on youtube that I find only to explain how to do it with the button "restart" that I can not click on. Thank you very much for the help! :)
Maybe you are looking for
-
Cracked screen and faulty USB ports on Satellite A105-S1014
On my Satellite A105-S1014 screen is cracked and needs to be replaced. How much cost could replace the screen? In addition, my phone and USB ports do not work properly. This problem arise well before that I accidentally cracked the screen. Some times
-
Envy 15 t: need to flash drive for my hp envy15t.is it available online
I was just trying to buy a flash disk 22 GB for recovery.
-
Problem with Vista and XP computers Internet connection sharing.
I have a host computer running Windows XP service pack 3, with an of Virgin Mobile Broadband2Go modem and a laptop computer with Vista. The host computer is connected to a Microsoft MN - 700 via a CAT5 network cable. The laptop is connected via a wir
-
laptop most of HP's thermal shutdown?
the operating system is Windows 7 Ultimate, but when I turn on it was thermal shutdown and suitor was overheated and I wait for 2 hours but still present (I think that stop at random) and I'll take on the laptop with no battery. What should I do?
-
RV042 and Windows 7 w / QuickVPN cannot connect
I have a RV042 are we able to access with XP using the QuickVPN client, but now we have added a laptop running 7 Home Premium 64-bit. I downloaded the most recent client (1.3.0.3), run it in compatibility mode (Windows XP, tried the SP2 and SP3), yo