I can not connect with the windows Messenger

Similar Questions

• Help, I changed the password of root ESXi via powerCli, now I can not connect with the web client or the console.

  Help, I've changed the root ESXi via powerCli password, now I can not connect with the web client or the console, but I can still connect to powerCli. The command I used was;

  SE connect-VIServer esxihostname-user root - password newpasswd

  This production network btw, I have connected to each host and run the above command, these ESXi hosts are not on a domain

  y at - it something I have left out. I really appreciate any assistance that you people can provide.

  Thank you, Joe

  It is probably a longshot, but a lot of things in the land of windows is not sensitive to capital letters as Unix is.  I wonder if your new password you put through powerCLI mixed uppercase in it and if the capitalization was abandoned by command windows powerCLI Analyzer, or he interpreted as all capitals or something.   If you can still get through the powerCLI you could try to reset the password again to something simple without capitalization mixed case and if your password on ESXi strategy requires a special character, try something different than a "$", like a "_" (I find that a '_' is less likely than some other special characters (, as a '-' or a ' / ' to cause problems with analyzers.).

  Edit:

  Another thing, you can try before playing with the password once again, is to create a different username ESXi using powerCLI and see if the password ends up what you think, it should be, and if you can get with the client vsphere using it.  In this way, you can find out if there are some problems with certain characters or Cap through command powerCLI Analyzer without losing your remaining root by powerCLI access.  After some tests, you can understand what went wrong with your initial password change and may be able to fix it with less risk of losing access.  I also assume that you can not create a new username on ESXi who is able to change the root password no matter what authority give you it, otherwise, you could create a new username with PowerCLI, then connect to the client vsphere with it and change the password to root from there.

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• can not connect with the server.

  I can't connect to the internet. WI - FI connected and at full power. This just happened and it's never happened before.

  Hi, it seems that there is a problem with the connection between your router and the dsl modem. Make sure the pin of the Ethernet cable is plugged correctly in any LAN port available on DSL Modem and on the WLAN port in the Wifi router.

  Go to 192.168.0.1, run the installation/quick installation program from this interface and make sure that you preferred DNS address type 192.168.1.1 or default of the DSL Modem ip address if you know it's different.

  It is always a good thing to restart both the DSL/ADSL Modem wireless router periodically to refresh the system and you will face less problems like the one you face now. If both modems are enabled for quiet a long time, it can either be hanged or perhaps become hot to damaged. So reboot them once quiet often when not on duty.

  Mark as answer if it answers your Question. Mark as helpful if it helped you continuer.* *.

• Can not connect with the FTP using NAT server.

  Hey, people!

  One machine in the net 200.2.2.0, with ip 200.2.2.222 (ftp client) must connect

  with a server FTP, using the ip 201.1.1.222 nat, but who can not connect.

  A newspaper using, serial interface, I saw the server response to the connection request.

  Using a different disconnection, in fas0/1 of the interface, I don't see the response from the server, I can

  not to see if nat has been done.

  Why?

  What's wrong?

  What can I do?

  To put this machine in another NET, 201.1.1.0 is so hard!

  Look, a router interface has ip 201.1.1.1.

  !

  interface FastEthernet0/0

  IP 201.1.1.1 255.255.255.0

  No cdp enable

  !

  interface FastEthernet0/1

  IP 200.2.2.2 255.255.255.0

  IP nat inside

  No cdp enable

  !

  interface Serial0/0

  Description INTERNET

  IP 100.100.100.30 255.255.255.252

  NAT outside IP

  No cdp enable

  !

  IP nat inside source static 200.2.2.222 201.1.1.222

  no ip address of the http server

  !

  Thanks in advance,

  Renato

  Hello Renato.

  also, it shouldn't make a difference, because your access list allows any last statement, try and add the following line to your access list:

  access list 103 permit tcp a whole Workbench

  access list 103 permit tcp any newspaper host 201.1.1.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 201.1.1.222 eq ftp - data

  access list 103 permit tcp any newspaper host 200.2.2.222 eq ftp

  --> access list 103 permit tcp any what newspaper of host 200.2.2.222 eq ftp - data

  access list 103 permit tcp any any 0 65365 range journal

  access-list 103 allow udp everything any 0 65365 Beach

  access-list 103 permit icmp any any newspaper

  access-list 103 permit ip any any newspaper

  Also, try to remove the access list together and see if that makes a difference...

  Kind regards

  GP

• Windows 7 can not connect with the HP printer

  I have a HP Officejet 6500 E709n and I am running Windows 7 Professional on my laptop.  Recently, the printer no longer works and needed an updated driver.  When updating the driver, you must uninstall the previous software.  Once completed uninstalling the new updated driver installation failed.  I get a fatal error message, and after 2 hours with HP support make advanced remote troubleshooting, we found that, whenever I try a new device/printer, Windows 7 is rejected and not allowing the connection indicating the device is not signed digitally.  The problem is the device is digitally signed, but Windows 7 is not recognizing.  How can I get Windows 7 to recognize and allow my printer to work again?  I have tried both add wireless printer and plug the USB cable without success.

  Hi Sheldon,

  What is the accurate and complete error code that you get?

  If you get the error fatal error occurred during installation, I suggest you try the steps from the following link:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02455020&LC=en&DLC=en&cc=us#N3054

  I hope this helps. Let us know if you have other problems with Windows in the future.

• BlackBerry Smartphones can not connect with the Office

  Please help me to connect with my Desktop Manager I could before and when I open Device Manager he has my PIN for let me no, I'm connected. That is what it is

  Thanks for trying to help, but the link does not work, that being said I installed 4.7 desktop and reinstalled: smileyvery-happy 4.6 and I'm Golden.

• Can not connect with the old username

  I have not been on this forum in a long time, & have changed since my email address. My username is "phrab" (without the quotes). Firefox will not a reason, either old or new password (I keep track of the 'old'). My passwords meet the criteria for the Firefox forum (> 8 characters at least 1 number).

  When I try to log in and say that I either forgot my password or my username, she prays for my e-mail address. Of course, it's a catch 22, because the former no longer exists.

  I want to create a new account with my old username. How can I do?
  Thank you
  phrab

  You can post a request in the forum contributors want to change the address of name and/or e-mail of the user.

  • [contributors/forums/contributors]

  Add [ATTN: Admin] before the title of the topic to get the attention of an administrator of the forum.

  Another possibility is to contact one of the administrators of the forum as Rosana or Madalina by a PM.

  • https://support.Mozilla.org/KB/meet-team

• Laptop with Windows 7 does not connect with the router

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  (Not this computer) laptop with Windows 7 does not connect with the web.  Box of message says - "t8ExtPEx.dll is missing". Any help is appreciated.

  Hi Roger,

  We would like to learn more about the issue. You get this message when you launch your Internet Explorer, or when you work with all Office applications?

  You can also try the solution posted by Redcar92 on this link: 8ExtPEx.dll is missing.

  Let us know how it goes.

• After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet.

  Network connection problem

  Hi all

  After cleanind my registry with Wise Registry Cleaner, I can not connect to the internet. Network LAN and wireless do not work. Windows 7 has diagnosed the problem and says the following:

  There might be a problem with the driver for the wireless network connection card

  Windows could not automatically bind the pile of IP protocol for the network card.

  There might be a problem with the driver for the connection to the Local network map

  Windows could not automatically bind the Protocol IP on the network card stack.

  Details of detection

  Diagnostic information (network card)

  Network card diagnostics information:

  Network adapter driver to connect to the Local network information:

  Description... Broadcom NetLink (TM) Gigabit Ethernet

  Reference the manufacturer... Broadcom

  Provider of... Broadcom

  Version... 14.0.1.0

  The name of the INF file... C:\Windows\INF\oem5.inf

  Date of the INF file... 14.05.2010 21:21:56

  Name of the section... DEV_KEY2. NTamd64.6.1

  Hardware ID... pci\ven_14e4 & dev_1692

  Instance status indicators... 0x180200a

  Status code from device Menager... 0

  IfType......................... 6

  Physical media type... 14

  Similar to Wireless adapt. The problem is probably not the antivirus program, since I have only deinstaled and the problem persists. I've also uninstalled and reinstalled the drivers, but no solution again. I can't do a system restore point before cleaning the registry, because Windows could not find a file that is needed for the restore. I restored again since before saved registry cleaning but no help.

  Any other ideas please. This really seems teribble :(

  Thank you

  Nikola

  Hello

  You can try all reset them TCP/IP and WINSOCK by this order from the high command prompt:

  netsh winsock reset
  netsh int ip reset log.txt

  How to run the command prompt as administrator (high) is here:

  http://Windows.Microsoft.com/en-us/Windows7/command-prompt-frequently-asked-questions

  part:

  How to run a command with elevated privileges?

  LC

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• I have not done an iTunes sync in almost a year, and since that time have installed Windows 10. iTunes now does not connect with the iPad. Any suggestions?

  I have not performed a synchronization of the iPad to iTunes in almost a year. Since that time PC now works Windows 10, iTunes does not connect with the iPad or the iPhone 6.  Any suggestions?

  Thank you

  To work with iOS 9.2, you must update iTunes to 12.4 v.

• I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  I can not connect with my BC password. I tried to reset and all I get is an error. I can not even find a support option to solve the problem. Anyone know anything I can do?

  Hello

  Just sent you a personal message

  Let me know if you have any question.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• I can not connect to the page member ESPN.

  Original title: Windows 8

  I am trying to connect to my Member ESPN page, I am told that I can not connect because the cookies must be enabled. Then, I went to internet and active options cookies for a higher medium setting and then a framework to accept all cookies. Both still did not connect.

  Have you tried all the other links provided?

  See if another program, maybe Anti Virus or other program of type safety, interfere with your access.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135