I can not install Windows Defender 64

Similar Questions

• I deleted Windows Defender on Windows Vista and tried to download and reinstall windows Defender but I gat a message that comes up saying that I should not install windows defender, because it came with the computer.

  deleted the windows on windows defender and impossible to reinstall! Message comes out and says that I should not install windows defender, because it came with windows vista. How can I try to fix it when I have windows Defender on my computer?

  You can not delete Defender in Vista.

  It is part of the Vista operating system.

  You can only activate / it:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Enable or disable the Windows Defender

  Many anti-virus have conflict Defender (McAfee, AVG, etc.), and turn it out / conflict with it.

  Microsoft Security Essentials, it turns off because it has its own version.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my computer can not find windows Defender?

  Why my computer can not find windows Defender?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• I can not turn windows Defender, error 0x800106ba

  original title: so many problems with my PC, help? Please...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Programs: thank you very much for any input.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What programs have already tried the problem
  • Programs
  I can not turn windows Defender, error 0x800106ba
  I appreciate sincerely any help for this.
  Thank you

  On Saturday, February 19, 2011 05:29:37 + 0000, ontrk wrote:

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Programs: thank you very much for any input.

  * You have problems with programs * error messages * recent changes made to your computer * what programs have already tried to solve the problem * programs

  Please, in the future, remove all the verbiage above when you ask for a
  issue. It has nothing to do with your question.

  I can not turn windows Defender, error 0x800106ba
  I appreciate sincerely any help for this.

  You are running Microsoft Security Essentials, AVG, Norton or McAfee?
  If you run one of those, she didn't have Defender. It's
  good, not bad. Not only is there potential conflict, but there is no
  reason to have both; essentially, they have something very similar
  for the Defender integrated and running both at once will hurt your
  performance and create the risk of problems that are contrary to each
  others.

  Ken Blake (MS-MVP)

• why I can't install windows defender

  He invites if poster is saying Microsoft Client Protection was found. If please remove this product and re-run Setup

  That does this mean remove my virusprogram microsoft security essentials anti install windows defender

  You should NOT replace Windows Defender by Microsoft Security Essentials, Windows Defender is Anti-Spwyare only but Microsoft Security Essentials is Anti-Spyware + Anti-Virus. Windows Defender is inside Microsoft Security Essentials. You must uninstall Windows Defender if you have Microsoft Security Essentials

• can not install window xp sp2 on acer aspire 4736z

  I can't install Windows xp sp2 on acer aspire 4736z computer.

  Why would you install sp2? Install sp3. SP2 is no longer support for security updates.

  Service Pack 3 download

• Vista - Error Code: 80070005 (could not install Windows Defender definitions)

  ·        I got s error code 80070005 when:

  Windows Update does is set to automatic update search and downloaded an update of the normal Windows Defender definitions.

  Downloaded, it would not move.  I regularly got these definitions of Defender updates and installed without problem, since a few years - until Monday July 5, for some reason any.  I'm not aware of any change that I made for all programs, because I downloaded and installed my update of definitions last defender about a week earlier.

  I use a single Windows Vista Ultimate Desktop without networking or wireless involved.

  I saw in a previous question and replyManasa P to Support of Microsoft, June 25 wrote:

  This problem may occur if access is denied when accessing or copying files during the process of Windows Update or Microsoft Update. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  Method 1: Log in to the computer as an administrator

  1. Firstly please confirm that you have logged on to an account with administrative privileges.
  2. now run Windows Update.

  Method 2:

  If you still experience the problem, reset the Windows Update components and check if you still get this error message.

  Click the Fix It button in the article below to do it automatically or you can do it manually. For more information, refer to the article below.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  This is an update of the HP Monitor driver.  Is "reset" Windows Update components all I have to do as well for my situation, with a problem installing Defender update the file definitions? "  Just using the "Fix it" button, or is there something different about my situation?

  Thank you, Jim North

  Hi Robear,

  Good news: this weekend the "alert" to install the file older definitions that couldn't went away on its own.  Then, this afternoon, the definitions of the latest update file 1.85.1905.0 downloaded and installed without problem.  Wonder what has caused the problem of moose?

  Thanks again, Jim North

• Boot Camp can not install Windows because of the formatting?

  I have a 2012 MacBook Pro (500 GB to 8 GB memory storage) with the OS X 10.11.3. I try to install Windows 8 Pro (64-bit) using Boot Camp. When I restart my computer after creating the partition, I have two USB ins journal. They say Windows and the other says Boot EFI. When I click on the option of Windows, I am taken to a screen that says that there is no bootable disk and restart with an inserted. When I click on Boot EFI, I did get into the Windows partition and can start set up for installation, but when I get to the stage where it asks me to install Windows, none of the listed drives are able to have Windows installed. I have a list of 4 disks, all drive 0 and then partition 1,2,3,4 respectively. 4 is the one that is 46.6 GB (I created Windows to be 50 GB), so I guess it's that I need to be installed in. However, when I click on any of the partitions, this message appears: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed to GPT disks. Windows cannot be installed to this disk. Hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu. "After talking with the Apple support (who told me it was a matter of putting in the form any and to talk to the Windows how do I reformat) and Windows support (who took the opportunity to remind me why I had stopped using them in the first place), I think I have a better idea of what it means , but I have no idea what to do about this. Anyone have an idea how I can fix?

  You have two choices.

  1. use GPT Fdisk to delete the MBR and continue boot EFI. Later, it is problematic when you install the drivers for the Apple hardware.

  2 use a USB2 flash drive and let BCA create setup of USB and partition your drive. No matter what Manual partitioning or manipulate the installer USB can cause problems.

• Can not install windows update to KB2656362 get the error code 880070490. Run fix, but it has not fixed the problem.

  Can not fix with fixit.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  If the system update readiness tool solves the problem, you will need repair Windows.

  Of course a repair installation will not solve the problem if it is due to an infection of virus/malware etc.

• I can not turn windows Defender on I tried everything nothing works

  I get the ox800106ba error and I can't and I have tried every thing nothing works

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• Can not install Windows manually

  Hello!

  Recently I received my laptop Inspiron 7520 of provider, it was the power outage before but now they changed the motherboard, as well as the machine, I received the Windows product key, unfortunately I lost my recovery media, I tried to install Windows 8 and Windows language unique to DVD but when I enter the product key a message this product key does not match for images available for installation Windows. Image that will work for my laptop please suggest me. This is the title of W8H 32/64 BIT DPK SVC product key

  Its possible that you can use a product key generic to install and activate then with this key but its strange that Dell would give you a replacement product key and filtering of spare not at the same time?

• Can not install Windows 8, Installation failed.

  Hi all

  I bought the upgrade of Windows 8 to 24.99 euros, I have Windows 7 x 64 clocked at present.

  I use the installation software that has many different error messages cause and I'm getting a little frustrated.

  I downloaded the Installilation about 6 times today, 3 of them is not to step 'review of download.

  3 which has the 'Installation' stage vomit message "Windows 8 Instillation failed.

  I would be really grateful for the help and please tell me if you need more details.

  Thank you very much

  Joe Jenkins

  Hi all

  MVP Andre Da Costa has provided a few different troubleshooting steps in the first reply to this thread. If you have not already tried those, please be sure to check out them.

  Some additional steps and information can be found in the following thread:

  Using the upgrade of Windows 8 for Wizard download and install received "installation of Windows 8 has no.

  If you have an unresolved billing issue, please contact a http://support.microsoft.com/gp/esd-support-phone-numberscustomer support agent.  Please note that you may need to contact your bank for any authorized transaction that did not pay.

  If after trying the steps that André provided and research on the information contained in the thread above, you are still unable to install Windows 8, please post back with as many details as you can share with what exactly happens with the installation.

  I see a few people post in this thread, sharing what has helped them, it's great because what fixes one, can not set another. Sharing what has helped fixed it, can help someone other difficulty.

  Thank you!

• Can not install Windows on Portege M200

  Hello
  I bought a Portege M200 opportunity. I discovered that the HARD drive was broken, so I bought a new one, plus a (160 GB)
  I know the problems Porteges can do when triing to install the OS on them, so I used this tutorial for installation of the network:
  [http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/ | http://blog.ryantadams.com/2008/02/01/how-to-boot-from-the-network-pxe-boot-with-tftp-and-windows-pe/]

  everything worked well. then, my xp installation 'button' was grey, so I went with this tutorial:
  http://blog.ryantadams.com/2008/07/30/option-to-install-Windows-is-grayed-out-when-running-network-install/

  that worked well, too. The installer kopies some files and the desire to do a restart. So he brought me to Windows PE, I typed 'wpeutil reboot' as described in the second tutorial. My PC has started again and then nothing happens.
  I chossed "boot from HDD" and all I can see is a black screen with a small flashing underscore white top.

  IT IS REALLY FRUSTRATING. I also tried another method, for example the back of things (like I got [my R100 to work | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=120473]), with the same result.

  Thanks a lot for your help!

  You have a smaller HARD drive you can try?

  The M200 may be limited to 120 GB HDD due to the LBA48 137 GB limit. More info here: http://www.48bitlba.com/

  Ultimately, you must use the original Toshiba Portege M200 recovery disk to reinstall Windows. You can order from Toshiba https://backupmedia.toshiba.eu/landing.aspx

• Can not install windows KB973917 update and getting error code 8000FFF

  I have a toshiba satellite A505 with Windows Vista 64-bit and 4 GB of RAM.  I can't install the windows KB973917 update and getting error code 8000FFF.  I have tried everything to fix it, but have had no luck.  Someone had the same problem?

  A few suggestions here: http://taurarian.mvps.org/WU_Vista/8000ffff.htm

  8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
  http://support.Microsoft.com/kb/946414

• Changed HARD drive and now I can not install windows 7

  I bought a new HARD drive and interlaced old, now I am trying to install windows 7 home Premium and I get an error: "Windows Setup cannot configure Windows to run on this hardware of computers.

  See if it works...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Copy the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.